Ever wonder what you're neighbours are doing to improve their homes? Discover what other Calgary homeowners have planned for their Drywalling projects by reading the details of their request for quotes below.
In total, TrustedPros has received 83 Drywalling projects posted by homeowners in Calgary seeking the services of local Drywall Contractors. Total estimated value of these projects is $901,000.00 with a per project average of $10,855.00.
Having a fireplace installed on the 7th, need someone to build a frame and drywall around the unit. Very basic straight wall, no mantel. Have some drywall on hand that can be used. Will need to adjust 1 or 2 panels of drop ceiling as well.
Will be approximately 59 inches wide and 92 inches tall.
I'm finishing my basement. I'm planning to contract the drywall installation and finish work out (walls and ceilings). The total area is 832sq.ft including a bedroom, a full bath, a living room, and a mechanical room that will not finished. I calculate the total linear distance need drywalls is about 206ft, wall height will be max. 8ft. There will be some soffit to cover heat ducts. So about 1648sq.ft wall area to be drywalled and mudded. Ceiling to be covered is about 713 sq. ft. I want to ceiling be finished with California type of texture. All drywall would be 1/2". In bathroom moisture resist drywall is required.
Mudding, taping, and sanding 500 sqft basement: includes a living room (two walls only, no ceiling), stairwell, hallway, and one bedroom (no closet). The walls are 7', and I would estimate there's about 1,100 sqft of drywall up. Note that the the drywall has already been hung.
Framing is done, board is hung, but now we need everything mudded/taped. About 700 sq ft in the basement, including bedroom with closet, large rec room with 1 post, and hallway/stairwell. Want alll walls, corners, and ceilings finished to paint-grade.
Looking for experienced mudder, to get it done quickly and efficiently. Would like at least two reference contacts to ensure quality of work. No huge rush on the project, but would like completed in the next several weeks.
Small leak is causing ceiling stain and wall is also getting wet as paint is letting go. Have not found the leak yet, but have to cut open the ceiling to find it. Upstairs bedroom on outside wall.
May need to cut out and replace drywall, tape, paint etc.
Some other small jobs as well if possible.
I am looking for a quote on a job in my condo. It involves framing, drywall and finish to paint-ready a small expansion of an existing closet in my bedroom. As well as some drywall repair to the ceilings in my bathroom and kitchen, and knock down of the wall between the kitchen and the dining room.
The condo is concrete foundation with steel studs between the units.
Need to move a kingsized headboard and footboard into master. The bed is solid hardwood with 7ft tall thick posts. The house is a recently renovated 1950's home with 8ft ceilings and narrow doorways. The bed has been hoisted into the spare bedroom but cannot be moved into the master because of height restrictions (i.e. door is approx. 6 feet and narrow). Need to know if it is possible to gain access through the wall by cutting a big enough space (without damaging the baseboards and hardwood floors), move bed through, and restore the wall back to it's original state (wall would need to be painted). Once moved the bed would need to be assembled.
Hi, We are just developing our basement and are looking for someone to drywall & spray the ceiling and mud and tape all walls. There is a rec room, bathroom, bedroom and stairs. It is about 475 sq ft. We are looking for someone asap. Please let us know if you are interested and an approximate estimate. Thanks!
I have a basement 1,203 sq ft. I have all the drywall sheets necessary for the project. I need a contracter for the following aspects of the project
1) install resilient bar on the ceiling
2) hang drywall and tape and mud
3) Soft corner treatments
4) frame and drywall underside of curved staircase
5) Knockdown ceiling treatment
We have a basement that we are in the middle of drywalling and we just found out that we have to put the house on the market in the next two weeks. The plumber cannot complete the bathroom until this is complete, so we need someone ASAP. The space is about 900 SQ including a small bathroom, bedroom and main living area. Drywall is mostly up and we just need someone to come in and do the taping / mudding / sanding and finishing. We need someone that is available within the next 3-5 days, so the plumber can complete next week. We have already purchased the mud, drywall etc, so it will just be labour.
i am building a 2160 sq. ft. infill in the sw of calgary. i am looking for quotes for the drywall (board, tape, mud, sand) portion of this house. it will be square corner bead. the house will be ready for board in a few months but would like to nail down this quote as soon as possible.
please contact me via email. firstname.lastname@example.org and i will forward you on a set of plans and answer any questions you have. thanks alan.
The room: 12' x 10 " by 10' x 11' with 8 ft ceiling. Laminate floor already in place. Metal studs on inside walls. Electrical and heating in place, 6 pot lights in ceiling. One 4 ft 3" basement window on outside wall. One electical box and wires 14 inches from window. (we will encase this in a 'false' cupboard door). One closet backing on furnace room (6ft x 7 " by 2' 7 "). Pocket door on same wall (10 ft wall) next to closet is already installed. Door and frame for wall oppostie 12 ft wall is purchased but not installed.
Looking for a price to have wallboard installed, mudded, taped and sanded. Only paint and stipple if affordable. Will pay with cash. May or may not have wallboard pre-purchased. Wallboard will come through the downstairs not through a window.
Need someone to finish my drywall mudding and bring it to the paint stage.the tapeing has been done and screw heads have one coat. Corners are all pretty much finished.
What I have with walls and ceilings is approx 80 ft of bevelled joints and 40 ft of butt joints to bring to a finish.
Hope to have it done asap.
We're having 2 skylights (2'x4' each) installed in the vaulted ceiling of our kitchen while our roof is being repaired, and need the ceiling cut and drywall fitted for the openings after install.
The skylight contractor will be leaving nails poked through the ceiling to indicate where the skylights have been installed.
Depending on our budget, we may want to have repair work done to the drywall around an existing skylight in our livingroom (also vaulted ceiling).
The house is a 4-level split in SE Calgary, built in 1987, and the ceilings appear to be the original.
I need to cut a small opening on the dryall between my furnace and washroom (inside the furnace room) to make enough space for installing a humidifier from within the washroom facing the furnace ducts. Let me know your schedule for a home visit and provide a price estimate for the job. I would also like to install a temporary cover on the opening based on your suggestion.
Each wall in my basement has a hole (or 10) in it due to anger management issues my son has. The walls need to be repaired so my home is presentable and I can look around with pride.
I need the drywall patched or replaced, mudded and sanded and I can handle the painting.
I would like to have an estimate done quickly and have the repairs done by the end of July if possible.
There are approximately 20 holes in various walls that need repair.
Hi. My house had some flooding in the basement, and now we need drywall repaired.
The space that needs to be replaced is about 40 feet along the floor, and I've cut about 18 inches up from the floor to remove all the wet drywall. It's in good share for a a repair.
Can you please call me to talk about this?
Repair of drywall due to recent flood damage. Water seeped in through a window well and we subsequently had to remove the lower 2" of drywall throughout the basement on all interior and exterior walls (except in the bathroom). The amount of drywall needing replacement is 500sqft (equaling approx 250 linear feet times 2 feet high). All insulation and vapour barrier replacement has been completed. This was a new basement development, completed professionally within the last two years - quality work is of extremely high importance to us.
I have a project of 40 homes to do out in 3 km outside of chestemear and would like to get bids on the Drywall packages; I will accept individual bids for sub trades i.e. Insulation, drywall, taping, sanding, texture, lose fill. If you would like to place a bid in for supply please feel free to do so. There are 2 homes that are ready to start and another 2 that will be ready Jan 3 2009. Please quote on the specs provided below and get back to me by email
Specs 5087 sq ft
9 8-foot rolls Polly
6-9-foot rolls Polly
Vapour Barrier 2.5 -8 Foot Rolls
R-20-23 1048 ft
Main Vapour Barrier -6 -9 foot rolls
Vapour barrier 7-8 foot rolls
Lose fill Ceiling top R-40 1272
Lose fill garage R-20 805
Half Inch Standard
22 527 Board Ft
Taping & Sanding Sq bead Round Alternate Pricing
Bead -1500 162 9ft lengths ft
Texture 5087 For snowtex and knock down Alternate Pricing
Not all the homes are the exact same but we are trying to get a general idea of what your bid would be as well these are the specs for the first home to be done.
Looking for someone to drywall, mud and tape my basement which is about 750 Sq feet. Looking to get the walls done with rounded corners and the ceiling with knock down.
Please send me your price per sq foot approximately to complete this project and If I am interested in your services I will get back to you to come by to give me a detailed quote.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started