Remove existing fence and posts. Supply and Install new wooden fence (with blended, concealed gate) to match neighbours (including stain). 6 foot high fence, 148 feet in length (includes length of concealed fence). The fence to be replaced is white. Existing concealed gate is located in the far right corner by the white arbour.
I am the owner of the property.
We need a new fence 30ft long and a small bit (8ft wide by5ft) of yard graded properly and landscaping advice (we can do some of this ourselves, we just need advice on what would offer good drainage with low maintenance). There is also a section of 2 by 4 and the corresponding drywall on the inside of the furnace room, which is outside our condo, this has rotted and needs to be replaced. The type of fence we want is a low maintenance type but it has to be a color match of the existing fence- dark green. We own the condo but the project is our responsibility. Is this something that one company can do quickly and at a reasonable cost?
Hey everybody,
So I'm looking to get a deck 24'L x 8'W and another little one 6'L x 3'W they are both 2 foot off the ground with 4 tread steps coming off each one.
I also need a fence 23' 6"L x 6'H and another fence 8'L x 6'H both fences need your standard gate in each one ill take care of the order of the material.
I just need a solid price on the framing of the deck oh yes ledger board is in with drip cap and piles are already in as well.
Hello , We just move in to our new home in chapelle area .We like to have the estimates for the next jobs.
1.- pressure treated fence 100 foot long fence and 2 gates 6x6 post 2x6 top and bottom.
2.- 16x12 deck ,pressure treated deck is 3 feet of ground so a pressure treated rail and 8 feet wide stairs.
3.- concrete pad from front of house to side door. I will like it to be 1 meter wide by 5 meters in length (measurement sugested by builder)
We built a house in west Edmonton Crestwood area. We now need a retaining wall and fence on one side of the property and a fence on the other side. We will need two possibly three gates. I am not sure of the length and would like to meet on property to discuss. Also would like to know what design options are for a fence.
Please email me or call me to discuss further.
Thank you.
Lyndon
Hi, I need about 70 Feet of fence installed for my backyard, and two regular type gates. I'm looking for something simple, 6 ft. tall, that provide privacy, and will keep my dog in. It doesn't have to be real fancy. Treated wood would be good. I take possession of the house on June 13th, so am hoping to get an estimate and get the fence done as soon as possible after that. Theeenis some old fencing that needs to be removed. I would want a quote showing with removal, but also please show what the cost would be if I did the removal.
Thanks
Fence as per community architectural guidelines:
4X6 posts
6X1 rough sawn spruce fence boards.
2 fence rails (2X6 S4S spruce on one side and 1X6 S4S spruce on the other).
Approximate length: 45.27 feet at the back, 60 feet one side only (other side already done by neighbor).
Would also like a quote for a basic deck if offering fence and deck package.
I would like a price estimate on building a fence for my home in the Ritchie area of Edmonton. The lot the home sits on is long and narrow. Both neighbours have agreed that a new fence needs to be built.
Here are some details:
Wood construction
Roughly 100 linear feet (most of it is two long straight stretches on either side of the yard)
6’ high fence - privacy type board spacing
Require 3 gates
Require new posts for entire fence (sunk in concrete)
I have the most recent real property report
May wish to have old fence removed, depending on cost, or may remove it myself
I would like the work done before the end of July if possible.
I need a fence gate installed on an existing fence. The gate needs to be approx 3.5 feet wide and 6 feet high. There is currently one existing, well anchored fence post, which is heavy duty aluminum/metal with the hinges already on it...the gate that was there was removed to have siding put on and the contractor never replaced the gate. I would like to get this completed as soon as possible, and there is a possiblility of retaining the installer to complete an entire new fence before next fall as i will be needing a new fence, but right now the priority is the gate.
Hello I am looking for some quotes on a fence for our new home. I have estimated about 142 feet of fence including the gate. Six foot high using 4x4 treated wood and two foot holes. I am required to match the building style of the area so their is a top,mid and lower rail that is 2x6. I have included a picture of my lot plan to give you a better idea.
Thanks
I need approx 245' of wooden fence to install. There is an old fence that we will remove prior to the work starting.
I would like to have 5 gates (2 wide ones open up to a parking area).
6' full privacy or with slats on top.
I have one quote with 4x6 posts, 1x6 fencing sandwiched between 4@ 1x6 top and bottom.
optionally I have a cement pad in the back to remove... please let me know if you can do this and how much extra it would be.
Perimeter of lot has been cleared and marked. Require wooden posts and farm field fence(4feet or higher) to be installed along boundary of lot. Require 2 gates(16feet wide) and 2 6feet or so also installed.Dimensions are 1550 ft x 610 ft x 1550ft x 632ft. 8ft wide clearing width has been made for purpose of fence installation. Require quote for either materials and labour or can provide materials & require labour only quote. Either or.
Hello,
I'm looking to install a gate at my home. However, the area is concrete. I'm looking for someone who can cut concrete, dig 2 post holes and mount my posts. Would also need the area that's cut to be repaired. May also need a support mounted to the house as it may be difficult to auger so close to the house. Needing someone who is going to be the most cost effective. Depending on the price, may also need the contractor to auger 2 more post holes on the opposite side of the house (these 2 are on grass/dirt). I already purchased the posts (cedar 4x4x10').
Or if you have a suggestion regarding installing a sturdy gate onto concrete, I am definitely open to ideas.
Can send pictures of area if needed.
Thank you
I would like a quote for fence post install. I need 22+ 4x6 posts set in concrete with gravel at bottom. The neighborhood I live in recommends 5 ft deep... I think this is a little overkill. What is your price at 3 ft deep? The fence posts need to be 6 ft high with tops cut at 45 deg on each side.
Hi,
I'm replacing a fence and need 26 to 30 fence posts installed,
Minimum reqs: 4x4 pressure treated, 6 feet above ground at least, concreted in.
I'd had a contractor lined up to install these but he flaked out, so now I have everything else lined up and would like someone ASAP. Please provide the earliest date you'd be available to come and install the posts. The One-Call is complete and flags are in place. The old fence has been removed, included all posts.
Thanks.
I need to build a fence on one side of my house. I only need the posts to be installed and I will do the fence my self.
I need about 13 to 15 posts to be installed. Preferred post size 6x4x10 feet and the hole need to be at least 3 feet. Preferred post material is pressure treated lumber, the holes be filled with cement.
I am the property owner.
we're looking for installation of approx 40 fence posts (6x6 pressure treated wood) around our property in NE edmonton (Brintnell subdivision). depending on price, both neighbors may be on board to have their posts installed at the same time.
please provide an online estimate (price per post would be great) and i will contact you to set up a time for you to come out to measure later.
thanks!
Myself and my neighbour want to put in about 200' of fence in Rosenthal. Can you let me know what you might charge for a) posts install only, and b)entire fence. The have to be 6x6 posts, chamfered topcut, 12" holes, with concrete (according to the Rosenthal Design Guidelines).
Hello,
We are looking for 3 fence posts to be topped. It's a small job but we're thinking it would be a quick easy job. Our house is in Donsdale so if you're in the area it could be a quick job for you. If you are interested please reply and if you could provide a quote that would be awesome.
Thank you,
Jody
Hello. We hired a fence post installer last year and then built our fence boards on top of those posts thinking that the kijiji contractor we hired was doing the right job as we provided our Real Property Report to him. Unfortunately he located the posts about 6-10 inches into our neighbours property and now they are complaining. It's been quite a stressful experience for our family. Looking for a skilled and understanding contractor who can help us at least relocate our posts or replace them where they should be. We don't mind installing fence boards ourselves.
Thank you for your time.!
Raphael
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.
Click here to get started