Ever wonder what you're neighbours are doing to improve their homes? Discover what other Edmonton homeowners have planned for their Framing projects by reading the details of their request for quotes below.
In total, TrustedPros has received 74 Framing projects posted by homeowners in Edmonton seeking the services of local Framing Contractors. Total estimated value of these projects is $3,436,000.00 with a per project average of $46,432.00.
Be a part of a well established framing company with high standards of quality and work ethic. We are looking for individuals with a high degree of drive, initiative, and motivation. Preference will be given to applicants with a minimum of one year experience in wood frame construction. Pay is consistently on the 1st and 15th without delay or hesitation. Please do not call if you have no vehicle.
Seeking professional framing contractor/individual to provide estimate for framing work. The expected project to start January 15th.
The contractor/ individual must be an expert in the field of framing and fully experienced and knowledgeable in all aspects of the procedures, methods and regulations, codes and municipal requirements. The CONTRACTOR shall supply all hand nails and power nails required for the work;
Scope of work:
1. Construct wood walls system for basement
2. Provide any framing necessary for the proper installation and functioning of the plumbing, electrical and heating
3. Reconstruct the interior stairway
4. Install basement windows
5. construct all necessary bulkheads
6. construct all backing required for drywal
7. Framing laundry area main floor
8. Reconstruct a rough garage door opening for replacement of the existed garage doors
Building new home on Southside of Edmonton, Lot has vacant land of both side, home has no curved arches or vaulted ceilings.
2 Story home with attached garage. I can provide a Telehandler/operators at no charge on weekends for lifting material to second floor and installing roof trusses. Framing to start fourth week of September. Look for firm pricing quotes on based on price/sq ft.
I need a small renovation and framing done. What I am looking for it some one to frame 3 walls and a high pitch roof 12/12 on a second floor of my home. The area is approximatly 14ft across the front of the home and 8 ft of walls on the side. Roof needs to be stick framed and can be discussed what is the best way of doing it. I would like to do it immediatly and I am a resonable guy. Will pay cash and ready once agreed to.
So I'm looking to get someone to frame up my house. I will attach drawings and I need an estimate for the floor and walls and roof. I would like an estimate for the floor and the interior walls seperate from the roof estimate. All the exterior walls are ICF so I just need like I said a seperate estimate for the floor/walls and roof.
Thank you very much.
I'm looking for an approximate quote on having someone frame a house
The location is west of Edmonton near Darwell.
The house is a 34 X 38 two storey with two dormers and 7 X 34 foot Veranda. House is square with no odd features. The sub floor is complete. All materials are supplied including trusses and rental of a zoom boom. Doors and windows to be installed at a later date.
Looking to get quotes on in-filling my current property in mid 2018. The proposed design is a modern split-storey skinny home ~2100 sqft, dimensions 18'x 50'. I plan on completing the majority of the inside of the house myself so I am looking on quotes for the following: demo, foundation, framing, siding and roofing.
Please contact me for more information.
A previous owner of my older home cut through two joists underneath the entrance to the kitchen. This area of the floor is now noticeably sunken. I'm not sure what's required, but I'd like to level the floor by repairing the joists and/or installing a telepost underneath this area. The basement is unfinished.
I am looking for a framer or contractor that has experience renovating mobile homes. We currently have a partial addition on our mobile home and would like to extend it the whole way down the mobile home and about 5 feet out from the front and side of the home. We would like an estimate on about how much it would cost just for the framing of the project as we can build the walls and put in the drywall afterwards. I am also looking for a contractor that will use used material from home reusables etc.
Please contact me if you can provide a free estimate.
Hi, I need a quote for the house as per the drawings attached for the following work:
1- Framing work for the entire house including the main floor and stair to basement, roofing trusses, etc.
2- The lumber supply and sheathing.
3- Joist Supply (or without)
4- Trusses supply. (or without)
Single detached 2 storey house, 1891 square feet wood frame. All materials are ordered. Need framer to give competitive estimate and recent references to be awarded contract. Site conditions are good. All financing is in place, we do not wait on bank draws for payments. Must be in good standing with WCB account active and open. Please list a minimum of 2 most recent contract contact names and numbers for references. If special situations require attention please respond with concerns.
Size: 3,230 SF
Structure Type: Wood & Steel
Start Date: Piles start Nov 13, 2014
Tender Closing Date: November 4, 2014
Tender Closing Time: 2:00PM
Can you please advise if you are able to bid by the end of the day today as the tender period is relatively short?
We live in a small 800 square foot house that currently has a steep, narrow staircase to the basement. To allow for future developments, we are planning to remove the existing staircase and build a new one in a different part of the house. Where the old staircase was, we would like the space opened up to allow more room in the kitchen, which would require the removal of the walls surrounding the stairwell. Please contact Sherri at 440-4898 to discuss estimate for cost of work and how soon it might be able to be completed. We appreciate your prompt attention regarding our inquiry. Thank you!
The project is for the framing of 2 skinny houses in west Edmonton. The framing contractor would be responsible for framing to lock up. Size is 1400 square feet per unit. Garage per unit is 400 square feet. Price to be based on square footage. Project start date, March 2018. Successful sub-contractor to have all WCB and Licensing requirements.
I'm planning a basement development in my house and I'm looking for quotes for framing work. Please refer to attached sketch as well as wall take-offs below
9' wall framing: Standard 2x4 studs 520 linear feet 16" O.C.
9' double wall framing (Around Theater Rm): Standard 2x4 framing 16" OC Doubled up w/offset studs 390 linear feet.
3 x 32" Interior Door Frame Provisions
1 x 36" Interior Door Frame Provisions (at Furnace Room)
1 x 36" Exterior Acoustic Door Frame provisions (at Theatre Room)
I recently purchased an acreage very close to Sandy Beach and am moving forward on the construction of a new shop (30X40). I am looking for an expression of interest from highly recommended framing crews. I am contracting the project myself and will be supplying materials. Blueprints are available if required.
Large apartment developer, currently looking for Framing and Siding Subs for townhouse and 4 storey apartments projects in Edmonton and around Alberta, Sask, Man. Materials and lifts provided, expedited work schedule. In April, there will be 3 buildings in Edmonton. 60,000+sq ft of framing per building. 25,000 sq ft of siding per building.
We are looking to tender framing and siding contracts for building D. Framing is scheduled for April 9th start. Siding start June 1st. We supply materials and lifts, and are looking for bids for installation.
There are 2 of the same buildings on site in Beaumont starting in April, and another in Red Deer this Summer.
Require a full assessment of or our upstairs floor/subfloor structure in our 13 year house. Loud popping and crackling noises are becoming excessive in high traffic areas and the problem seems to be spreading throughout the second floor. We had what was called a "silent floor" system installed when the house was built which is not very silent any more. Hopefully it is only a matter of replacing some bad sheeting, perhaps installing extra blocking and properly securing the new sheeting with screw and glue. I would hope to be able to save and re-install the carpet and underlay if possible.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started