Ever wonder what you're neighbours are doing to improve their homes? Discover what other Burnaby homeowners have planned for their Handyman projects by reading the details of their request for quotes below.
In total, TrustedPros has received 21 Handyman projects posted by homeowners in Burnaby seeking the services of local Handyman Services. Total estimated value of these projects is $35,000.00 with a per project average of $1,666.00.
If you're in need of a contractor for your Handyman project, use our job posting tool to get matched to local pros or browse our directory of Read Reviews of Burnaby Handyman Services.
|City||#Projects||Total Value||Avg Budget|
I need my deck posts covered by fascia over.
6 posts with concrete base.
I also need a floor transition fixed and a non standard sized closet sliding door built and installed.
I am also looking to replace front stair railings. 4" or larger alum posts and hand rail wanted around 26' in railing and old iron rail disposal.
Lastly I'm also looking for someone to clean my unfinished garage. This is the highest priority job since I can't really use it until clean.
Please estimate any jobs you are interested in individually.
A few of the projects are as follows:
1. Glass panels in new meeting room
2. Counter construction in lunchroom
3. Cabinetry/storage creation for
a. QA Lab/IT work area
b. custom built work stations to fit under window
c. Storage in small meeting room
d. Office supply cupboard
e. Bathroom storage/coat rack
f. Lunchroom cabinets
4. Possible flooring change for lunchroom/play area to retro checkerboard vinyl tiles
5. Glass panel and sliding door to separate play area from work area
6. Possible glass panels in upper portion of boardroom to allow light
7. Possible matching glass door on boardroom
cleaning colored concrete driveway. maybe a coating on top.
repainting a exterior house. (just a part of it) (stucco) Also roof border around it.
repainting interior ceiling water marks from flooding.
window seals are broken in several windows. is there a way to fix without changing the window?
We have a 42 inch LCD TV that we need mounted on an interior Steel stud wall. We have purchased a full motion mount.
Please respond with the following information:
1) rate per hour
2) estimated length of job
3) insured work?
4) any concerns or questions you may have
5) your website and any customer testimonials you may have.
I will be moving into a brand new condo and I would like to mount a 42" plasma on top of the fireplace. I was planning to do this myself but realized that most mounts are designed to be attached to wooden studs. The condo possibly uses metal studs. My mount will need to be articulating (can be pulled out and swivelled +/- 90 degrees). Are my requirements possible and is this do-able?
I have ivy growing up my chimney, and I'm afraid it might also be coming down inside the chimney too, but can't get up there to look. I have a gas fireplace insert and am not sure if turning on the fireplace will be enough to get rid of any ivy that might have gone into the chimney insert or if I need to get someone to come and remove the ivy. I have heard both opinions that its fine to leave the ivy and its dangerous and must be removed. I'm not even sure who would do this kind of job - handyman? landscaper?
We recently had an air conditioning system installed in the attic and they had to widen the attic hatch by about an inch in order to get the system up into the attic.
Unfortunately, this means there's now a half-inch gap on either side of the attic hatch that leaks air and insulation into that bedroom.
The hatch is currently just a piece of drywall that sits on top of the rectangular hole into the attic, and has some insulation attached to the top of it.
Also, the edges of the hole are still quite rough and look bad.
We're looking for someone to clean up the attic hatch hole and create and install a new cover for it.
We're located on Capitol Hill in Burnaby.
Please send me a request for replacing a hole in the wall (needs to be drywalled and painted). We have the paint. Repairing a hole (just a little more than one square foot high and a bit less than a foot wide.
Can you please give me an estimate price to have this done :)
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started