Ever wonder what you're neighbours are doing to improve their homes? Discover what other Vancouver homeowners have planned for their Cabinetry and Millwork projects by reading the details of their request for quotes below.
In total, TrustedPros has received 35 Cabinetry and Millwork projects posted by homeowners in Vancouver seeking the services of local Cabinet Makers. Total estimated value of these projects is $277,000.00 with a per project average of $7,914.00.
If you're in need of a contractor for your Cabinetry and Millwork project, use our job posting tool to get matched to local pros or browse our directory of Read Reviews of Vancouver Cabinet Makers.
City | #Projects | Total Value | Avg Budget |
Burnaby | 14 | $64,500.00 | $4,607.00 |
Surrey | 19 | $103,500.00 | $5,447.00 |
North Vancouver | 10 | $62,000.00 | $6,200.00 |
Coquitlam | 7 | $46,000.00 | $6,571.00 |
Vancouver | 35 | $277,000.00 | $7,914.00 |
After researching, ( no complaints) getting referalls, we chose this company to re-do my clients kitchen. Small Galley kitchen old out new in, new granite counters. Original very detailed installer measured for this job appaerntly quit. After no show & install - wrong cupboards- The fix is worse than the original mess. Oven- needs 26" shelf is 23"
Microwave is 14" space they have built is 10 both are right there.
Company president & owner Has agreed to have someone else come in & either fix or replace. & Pay for it. Since they are in the wrong
( I have emails etc) & my poor client has no kitchen for a month.
I have a plumber coming in to hook up sink ( they also removed & tossed all her plumbing) so she can @ least have a sink.
pictures of this can be viewed @ www.2.snapfish.com
See attached image for what I want installed onto my wall.
I have all the hardware already, table top, shelf, a triple computer monitor mounting system (not shown), and a pull out keyboard arm (not shown).
The computer monitor mounting system is about 85lbs in total, including mount and all monitors attached etc.
The keyboard arm is only about 30lbs including keyboard and brackets etc.
The image is to give you the idea of what I want done, simply replace the tv with a triple monitor hardware setup, and add a pull out keyboard under the shelf.
This is a highrise building, so metal studs are in place. I believe the only way to make this work would be to run a slab of plywood, or 2x4's, something along that line, so that the setup can be supported and will not pull out of the wall, or bend the metal studs. Toggler anchors (snap toggle) will be needed I imagine. I'm not the carpenter here, so maybe you can give me some insight if this is a "no problem" installation.
Please let me know if you have any questions, if not, a quote would be appreciated.
Cheers!
I have a (roughly) 10'x2.5'x8' alcove in my dining room and I am looking to have a built in storage unit built complete with customs sized cabinets, a desk top and open shelving on top. I would prefer it made out of the same cabinet material in my kitchen, white (I think Ikea) cabinets. My budget is $2000 plus tax.
Hi,
I am looking for a carpenter who is able to shorten the size of the cabinet above my fridge, note the photo. The cabinet itself only needs to be reduced in height and there are no changes to the width of the cabinet. This should be a fairly quick job and was wondering what your quote for this job would be?
image.png
Look forward to hearing from you.
--Prashant
Our hotel has approximately 200 rooms with kitchen cabinets. Since we are purchasing the darker rosewood coloured furniture, the reddish mahogany finish on the cabinets no longer match. The cabinets are coated with what I believe is Melamine paint.
I'm looking for quotes on refurbishing the cabinets, price per room. Due to the nature of our business, this would be an ongoing project by completing a few rooms at a time instead of all at once.
Denis R
Operations Manager
A heavy cupboard door has placed too much weight on it's foundations, and has resulted in stripped foundation. The screws are no longer able to support the weight. My real estate agent suggested a repair contractor, who made the problem much worse! Now it's a complete mess. I need a handyman who could replace the wood strip which acts as the foundation, and probably replace the door hinges and screws. I would not have thought this was a difficult job for someone trained in such matters, but apparently it was. I suspect it is a few hour job. It's not a big job, but perhaps someone has extra time for small projects. Need it fixed ASAP, my place is still being viewed for potential purchasers.
Thanks!
I need prices from at least three companies for a large finished cupboard in our warehouse to house 28 Tupperware bins of cooking equipment and shelving for dry goods.
The wall space we are working with is 244 inches long by 8 foot high and the present wall needs to be stabilized between 2 steel posts.
A 2 door fridge/freezer will go at the North end of the wall with the three 42`wide cupboards for the totes in the center with the 2 sets of 5 dry goods shelves that are 35€ wide by 32€ deep adjustable shelves c/w doors on the South end.
The cupboards and shelves will be built out of € pre-finished spruce plywood and the 8 doors are to be with continuous piano hinges.
The program Manager has measured the tote bins for the two sets of equipment and dry goods storage needs.
26 bins (17 inches height x 29 1/2 length x 19 3/4 width)
2 bins (19 3/4 inches height x 32 1/2 length x 20 1/4 width)
This will equate to 3 (42€ wide by 98€ high 5 shelve double door sections).
Dry goods storage 2 (35€ wide by 32€ deep 5 shelve closed cupboards by 98€ high).
Could you please send me an estimate for this project installed in our warehouse.
Thank you,
Will
I am looking to have a wall unit constructed for a 15 ft wall that should hold a small closed closet area for hanging clothes; storage for bedding for a sofa bed; bookshelves and an open area for a TV to either sit on a shelf or hang on a wall
I have not found any pre-built cabinets that are not Ikea type quality. I am looking for something more substantial
budget closer to $5,000-10,000
Custom white cabinetry;
Full scale drawings already completed: available upon request
Interiors
Modern lofts
Solid core wood entry door
Over-height ceilings
Finished concrete floors
Office niche
Built-in storage cabinets
Original refurbished windows
Original exposed Douglas fir wood beams
Kitchen is about 20 years old, mdf, and we are looking to replace the doors and possibly repainting or refinishing the cabinets. We think the cabinets themselves are in good enough condition to keep but would have to be painted or somehow refinished to match the new doors. This kitchen is located in a rental house in Vancouver, Cambie area. It is a nice heritage house so we would like a decent quality job but we do have to be careful about cost.
We are looking for someone to help us with the following:
Bathroom: rip out the current shower and bathtub combo and replace it with one large shower.
Cabinets: looking to install cabinets and shelves throughout the townhouse
Kitchen: extend the kitchen counter and cabinets
This renovation will be done in a new townhouse that has just been built, we would like this work to get approved before an official strata council is formed.
Two double closets, one triple closet and one linen closet, Each has white wire coated shelving. I wish to have simple wooden rods put in at different levels and a wooden shelf across the top. The doors on the slosets are mirror bifold. I wish to have solid wood, mirrired or depending on the cost opaque dorrs with dark trim sliding doors put on. i believe these closets are the original in a 1986 building.Needd free estimate and references, liscense info and insurannce. If price is right more jobs to come.
Also need to have a door hook on bathroom door reattached, Door is hollow and the hook was pulled out.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.
Click here to get started