Ever wonder what you're neighbours are doing to improve their homes? Discover what other Vancouver homeowners have planned for their Fencing projects by reading the details of their request for quotes below.
In total, TrustedPros has received 28 Fencing projects posted by homeowners in Vancouver seeking the services of local Fence Companies. Total estimated value of these projects is $130,000.00 with a per project average of $4,642.00.
If you're in need of a contractor for your Fencing project, use our job posting tool to get matched to local pros or browse our directory of Read Reviews of Vancouver Fence Companies.
|City||#Projects||Total Value||Avg Budget|
It is 4 plex strata in Vancouver, we are looking for a new fence. It is a corner unit and fairly big lots to cover with fences. We have hedges in the front, and rest of them are fences and gates. We would like to have a reasonable quote and opinion about original fence get fixed / get new pre-feb. fence / get custom fence. Please contact me for details.
I would like a 6' backyard fence built. Horizontal design using cedar. The yard dimensions are roughly 22' by 28' by 22'. There will be a regular sized gate (4'?) and a small gate in a 2 foot space between a side fence and the house, so I can maintain access to the side of the house. There is no existing fence to tear down.
I am the property owner
I now have a concrete block fence at the back of my property. I have no privacy and people have come into my yard from the lane. It is 11 ft which includes a gate. I also have a side gate which is 4 ft. and a carport which is about 8 ft. - I would like a latch put on this one so it can open when my this car is removed for good.
I'm looking for a handyman or contractor.
Two panels of my front yard fence fell down and I'm thinking of replacing them with two new panels if the old ones are found unsuitable, but I want the panels to open like a gate. I believe the fence is around 6 ft high.
Send me your info and quote, or contact me to see the fence and give us a quote.
Thank you in advance.
My gate was struck by a car and need to be fixed. The damage are listed below and shown in attached picture.
Metal plate fell off from the gate
Control arm damaged internally and need to be replaced.
One anchor of control arm is cracked
Garage gate was dented by flying debris.
More information available on request.
I have a gate in my garden and want to turn it into one that can automatically close and open.
The gate is around 10 feet 8 inches long (enough for a vehicle move in and out). Since the project is quite simple and straight forward, to save time and your fuel, I have uploaded two pictures here and provided the above estimate size of the gate so that an estimate could be provided without a visit.
Suggestions are welcome. Please note that I do not need a fence.
Looking to provide a privacy fence and garden stairs between two townhouse units in the back yeard area. There is already an existing wooden retaining wall and stairs in this area, but residents of these townhouses require one additional set of steps. This is not that large of a project, but will lead to other projects in the future, due to the age and needs of the entire cooperative community. There will also be an additional gate on one side of the fence.
We have 120' frontage that is on two lane main street with a driveway. The noise of bus rumbling bothers us. I did lot of search online and learned we could build solid wood fence with mass loaded vinyl to sound proof the traffic noise. We are looking for a contractor to build the fence, gate and plant hedge in front of it. We are in Vancouver west.
I am looking for a Fence contractor who can design and install a Chain Link Fence between my 2-car garage/driveway and the allay. To ensure a sufficient amount of space in the driveway, I think I need 2 gates: 1 driveway gate (swing), 1 sliding gate, and then some fence to connect the remaining areas together.
Vancouver, East 4th Ave
Fence between good neighbours is plant and grape vine over crowded and falling down. Tear down and take away material but keep the grapevine to reattach to a brand new built fence. Estimate length 35 feet. Type of fence wood cedar, height to be determined. Cost shared between neighbours.
I require an 8 foot section of new picket fence, including installation of one 4x4 support post.
It is a small job and I require an experienced and qualified professional to rebuild this section of fence. I attached pictures of the old portion of fence that was broken.
I am available Monday (tomorrow) if anyone is interested in stopping by to quote on the project.
2 x ~8ft lengths of steel fence required ASAP. Whoever can build competently within very reasonable budget first wins. Will need to drill into concrete. Fencing required to block each end of a narrow walkway between building and existing brick fence. Preferably 6-7ft tall. Would prefer ornamental but (depending on cost) could be coated chain-link as well.
Total distance from the garage to the neighbour's fence is 19 feet (according to the picture attached). Fence will be put behind the cars at the edge of the grass. Wooden slats with 3 inch width is preferred. Quote on a privacy height fence preferred but can also be quoted on different heights as well.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started