Door Closer
4/11/2018 at 8:23:22 AM
Please look at the photos.
I believe that knob #1 is the door speed
Knob #2 is for the latch speed
Knob #3 is ?? (don't know)
I have adjusted the latch knob and the door had closed well but for the first 3 tries.
On the 4th or 5th attempt, the door would "close" but it would not close perfectly well. The door latch would not fit perfectly into the door socket. The door knob would rest on the edge of the frame. I have tried it on many attempts over a long period of time.
How would I be able to resolve the problem i.e. I want the door to close firmly and perfectly well?
Thanks
4/11/2018 at 9:17:18 AM
Hello,
It looks like you have adjusted the hinge out too far. The dial on the side adjusts closing strength. Make the dial loose and then adjust your hinge for travel once set you then can adjust closing speed.
I hope this helps
4/11/2018 at 9:21:09 AM
TO JOE
Which knob# were you referring to?
#3?
Please give me the knob #
Should I twist it clockwise or anticlockwise?
Thanks for your help.
4/12/2018 at 8:24:12 PM
Ok it does not look like it was installed properly.
This thing is easy to do but temperamental if done incorrectly.
Look up TC201 installation instructions. I tried to add on this blog and it did not convert to Jpeg..
4/13/2018 at 6:02:27 AM
To Tony of Sodapop
Please post the pictures for the installation.
I had encountered problems with the upload of the photos too.
Please help
Martin Ong
-------------------------------------------------
Hello,
It looks like you have adjusted the hinge out too far. The dial on the side adjusts closing strength. Make the dial loose and then adjust your hinge for travel once set you then can adjust closing speed.
I hope this helps
Which knob# were you referring to?
#3?
Please give me the knob #
Should I twist it clockwise or anticlockwise?
Thanks for your help.
Search the TrustedPros directory and discover the best contractors in your area.
Find your home service pro
