Categories

Jack Post in Basement

Question Icon
Posted by: from Orangeville
3/17/2018 at 10:08:10 PM

Hello, I have a jack post in the basement of a home built in 1986 that a home inspector has flagged because there are no bolts, welding or brackets attaching it to the steel beam. Should I be worried? Is this a safety violation?

Jack Post in Basement
REPLIES (6)
User Icon
Date/Time3/18/2018 at 6:16:08 AM

Go to the hardware stone , and buy some telepost pins , and get someone to put it in .

Problem is the telepost isn't suporting the weight that it needs to

User Icon
Date/Time3/18/2018 at 8:36:02 AM

Article 9.17.2.2.1) of the current (2014) Building Code reads: Lateral Support: 'Columns shall be securely fastened to the supported member to reduce the likelihood of lateral differential movement between the column and the supported member.'

So technically this is a Code violation, however should you be worried? I would say not necessarily if your home is 32 years old and everything is square, level, etc.; highly unlikely anything would happen unless severe earthquake, WW III, etc. etc.

User Icon
Date/Time3/18/2018 at 10:35:10 AM

Hello Doreen

If it hasnt moved in all these years it probably wont. But my advice would be to put bolts in it. for one they should be in there and second it would prevent you from worrying about it

al

User Icon
Date/Time3/18/2018 at 11:24:32 AM

Hello

I assumed you are talking about permanent steel post.( if it is not a permanent it has to be replaced)

prior 2015 all the house built in GTA the posts are not welded to Ibeam because they followed old OBC.

I would say you should not be worry about it since we don't have earthquake in Ontario.

As a certified home inspector talking, I see this daily bases but I never point to it as long as there is a proper lateral support.

User Icon
Date/Time3/18/2018 at 12:41:29 PM

Yes all columns and Jack posts should be attached to the beam in one way or another. Sounds like the easiest solution is brackets but with that comes a lot of drilling. I prefer a simple easy weld if you can get a welder in. Hope this helps you out by code it is a must!!

User Icon
Dave from Crown Choice in Nanaimo
Date/Time3/22/2018 at 10:17:53 PM

If it hasn't moved in all this time I would not be worried about it but I would definitely get a couple of bolts and drill holes for them and attach the post to the beam. If the post was to receive a something heavy to hit it laterally the structure could be compromised and insurance may deem it as a liability. Also when it comes to sell the house if the occupancy permit has not been issued could hold up the sale. The missing bolts should have been there for the occupancy permit so I'm surmising it has not been issued. It is in your best interests to put some bolts.

Search the TrustedPros directory and discover the best contractors in your area.

Find your home service pro
Great renovations start with a great contractor.

Since 2004, TrustedPros has been helping homeowners find the right contractor for their home improvements and repairs.

Post Your Project

Within hours you'll be comparing offers from top-rated professionals. It's free to post and you're under no obligation to hire.

 
Trustedpros Inc. does not warrant the accuracy, completeness, safety, legality or usefulness of any Content, or Whether Content is Current and up-to-date, and TrustedPros Inc. Shall have no liability whatsoever with respect to your use or reliance upon any content or for content being removed or otherwise ceasing to be available. Please refer to the terms and conditions of use of this websites for more details.
Categories

Get quotes from top-rated contractors

x