Ever wonder what you're neighbours are doing to improve their homes? Discover what other Guelph homeowners have planned for their Electrical projects by reading the details of their request for quotes below.
In total, TrustedPros has received 51 Electrical projects posted by homeowners in Guelph seeking the services of local Electricians. Total estimated value of these projects is $177,000.00 with a per project average of $3,470.00.
If you're in need of a contractor for your Electrical project, use our job posting tool to get matched to local pros or browse our directory of Electricians in Guelph .
City | #Projects | Total Value | Avg Budget |
Milton | 71 | $203,500.00 | $2,866.00 |
Cambridge | 46 | $245,000.00 | $5,326.00 |
Kitchener | 59 | $177,000.00 | $3,000.00 |
Georgetown | 19 | $77,000.00 | $4,052.00 |
Waterloo | 26 | $300,500.00 | $11,557.00 |
Guelph | 51 | $177,000.00 | $3,470.00 |
Install a breaker and reconnect the wiring to run my stove, I have purchased the breaker. It was disconnected when the previous owner installed a gas stove, I have removed the gas stove (gas has been capped) and replaced with electric ... when I plugged in my new stove, found the wiring downstairs in the panel box was disconnected. Help please, have been without my stove for 2 weeks now, need to start cooking. Thank you!
About half the outlets went out in basement apt. Tenants reset breaker which did not change anything.
Outlets in series? One bad one caused others to go out? Something at breaker?
.
Being having most of place with no electricity is fairly urgent (And I am busy!), figured it would be best to have professional take a look. Furnace seems to draw too much power as well, trips the breaker once in a while.
Availability for access is flexible.
We have 2 students living in our basement - in one of the bedrooms the lights went off and also the plugged-in devices like TV stopped working.
In the neighbouring room the lites flikkere for a while and the wall sockets became useless. There was a buzzing-like sound coming from somewhere - I reasoned it could be some sort of short, may some mice are gnawing the insulation - so I started to take apart the ceiling in the neighboring room.
Some of the basement is powered via a sub-panel with breakers, it was originally installed by an electrician. I started reparing the sub-panel / changing the breakers but for no awail.
So we need someone to inspect the place and repair what is wrong.
House: 1988
Where: Upstairs
What: Need 3 lights put into 3 upstairs bedrooms
How: There is attic access with insulation. Please put insulation back where found
Currently: Have a switch that turns on an outlet. We have lamps plugged in, but want overhead lights.
Must: Contractor must have insurance and references.
The home is two years old , we have just finished the framing and now we need a quote on doing all the electrical in our approx 2000 square foot area.
We have two bedrooms , one bathroom which needs the sewage excavator pump wired in . Also we have a bar area and a couple of half walls that need recepticals installed . The rest of the area is just living space .
We are located in Guelph, Ontario.
Looking for certified electrician to run hot tub wiring (240 volts??) from garage to back yard - will require a fairly straight run from electrical box to hot tub. Garage and basement are unfinished. Looking to have this done by Sat Aug 18th, 2012!
Will require about 70' of wire.
Looking for competitive quotes.
Thank you in advance.
I need three ceiling light fixtures installed for the three bed rooms. I live in a townhouse condo and the lights are currently controlled where you have the bedroom light switch connected to an outlet. So i'll like to have it where the bedroom is is controlled by the switch. I would like that that old outlets operate as normal.
There is an attic above all the rooms.
If the task is more expensive then please let me know in advance. I can arrange for a showing as well
Install of electrical outlet for dishwasher in our Kitchen. Electrical panel resides in the basement directly under the kitchen making access very easy. Need quick install in the next 2 weeks as we are moving and were requested this as part of the sale of this house. The house is a 5 year old townhome and should be a quick job.
I am looking for an online estimate to do electric job in a basement. basement it is finish but 4 bedrooms will be built. i need new wiring and move existing if need it.
Please send information about you rate and i will contact the best 3 esimates.
Required:
Master electrician licence
Insurance
WSIB
Thanks
Roberto
Hi!
I'm looking for an electrician to upgrade my existing panel from 100A to 200A without changing the old circuits (~6 existing circuits). I have confirmed with Alectra that I can upgrade my service to a 200A service.
I would like a 200A 40/80 panel with the following breakers:
16x 15A
3x 20A GCFI
3x 40A (double)
2x 30A (double)
Do the bedroom/living room circuits need to change to ACFI? How much would this cost?
Thank you,
Deanna
It was described that I have to remove knob and tube-there is a 100 amp pannel already installed and some of the house is already connected. The galvanized plumbing in insulated with aspestos-some copper has been put in in the bathroom. The one side of the house seems secure but there is sign of damage on the edge of the joists at the front of the house and where the old bathroom used to be which the inspector stated needs remedial work!!. I can send the inspection report in a fax-please call soon. With quotes I could get financing for improvements ASAP. Thanks so much have a great day Helen.
-I have a 40 year old 2 story semi-detached home (approx 1000 square feet) with aluminum wiring that has failed in several areas of the home and is quickly becoming a fire hazard. I am able to take advantage of a program that will assist me with the costs of this upgrade but I must give them a quote within 1 weeks time to meet their deadline. This program is being dismantled hence the need for haste. I've contacted Hydro and have been told that I'm able to upgrade from 100 to 200 amp service which I would like done at the same time. I'm aware that walls and ceilings will have to be accessed and replaced in order to replace the wiring so the quote will have to detail all of these costs. If you don't have to do a site survey kindly email your quote to me otherwise contact me to book an appointment.
I have a partially finished walk out basement that would be included in the quote and replacement materials for walls and ceilings would be drywall and paint.
Kindly let me know if you require additional details.
We're looking to move some electrical in a century home to install some new light fixtures and hope to receive a quote on the job. The work would include:
• moving a large chandelier from Room A (with wiring in the ceiling), to Room B (that doesn't currently have wiring in the ceiling).
• addition of two wall sconces to Room A (no wiring in place in the wall for these).
• Addition of dimmer switches for these new fixtures.
• safely closing up the ceiling (removing box or whatever is required) for Room A where chandelier used to be; we're not having a ceiling fixture in this room.
Many thanks for letting me know next steps to secure a quote and anticipated timing when this could be completed. We have the light fixtures ready to install.
Guelph - We have a 10-15 foot section of Rim Joist / Sill plate under our patio door that has some carpenter ant damage. They were attracted by a moisture issue that has since been resolved. The scope of the work is to investigate and repair this section.
Additionally, we would like to add 10 potlights to our existing main floor ceiling and relocate a light fixture in the kitchen.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.
Click here to get started