Ever wonder what you're neighbours are doing to improve their homes? Discover what other Hamilton homeowners have planned for their Carpentry projects by reading the details of their request for quotes below.
In total, TrustedPros has received 75 Carpentry projects posted by homeowners in Hamilton seeking the services of local Carpenters. Total estimated value of these projects is $1,402,000.00 with a per project average of $18,693.00.
|City||#Projects||Total Value||Avg Budget|
We recently removed the old lathe and plaster walls from our bedroom, put in insulation and vapour barrier, and drywalled/painted the walls. The only thing left to do is add in some new trim/baseboards as well as two new door frames/trim (doors already installed) and one window frame/trim (window also fully installed). Some of the gaps between the floor boards and walls are a bit wider so we would like to add some quarter round pieces to the trim. There may also be a bit of plaster patching in the hallway that needs to be done around the outside of the door frame as some of it was a bit messy coming off. We own the house and the room is roughly about 16x12 FT. Please contact us if you're interested in this relatively small finishing job. Thanks!
Currently have carpeting on 14 steps. I will remove the carpeting. The spindles will have to be taken out and then replaced. Then stair threads (veneers) both steps and risers that can be bought at Home Depot or Lowe's will have to be placed over the existing stairs trying to match the current oak color that I have now.
Need fence removal of old which is the old metal fence and we would like a new fence with the lattice, throughout with the partial lattice on top, works out to be 5-6 feet. 60 feet. MUST be taken out and removed, so that will be your responsibility.
#2 separate quote. We would like a porch on front of the house, we would like of course, railing with the black metal spinals? Size will be 6 by 12, and will cover the old existing concrete steps. Stairs to exist on the drive that will also be replaced at a later date.
We are both retired and I am disabled and that is the reason for the porch, all is needed so bad but the budget is tight. A BOX WILL BE REQUIRED TO REMOVE FENCE WE HAVE BEEN HERE FOR 40 YEARS...
In a 7x5=35sq ft washroom, we need a Vent/Exhaust Fan installed. There is no existing Vent/Exhaust Fan so an electrician is required and a roofer to vent it out.
We would like an Attic Ladder/Folding Stairs installed, along with a light installed in our attic. We would like to utilize the attic for storage space.
First Option – Small Job
Currently I have a non-centred garage entrance that needs to be centred leaving a framed opening @ 7ft x6ft to accommodate a new garage door (supplied by a different contractor). The old garage doors are OLD 'barn doors' that open out and do not lift up into the garage. This is viewed as a small job for a carpenter with about a 1-day effort. For this, I do not require financing.
Second option – Larger Project
My overall plan starts with centering the garage door opening, followed by overlaying the wood with vinyl siding, and replacing the ‘barn doors’ with a new garage door. If the overall job (siding, centering, new door) is to be completed by the bidder, I would require financing.
I have a shelf in my classroom I need removed, it's attached to the floor. Once it's removed the flooring needs to be replaced, trying to match the existing flooring and then adding some shelving on the walls above, children height.
I am looking for someone to come and give me some quotes.
Require aproximately 280 linear feet of crown moulding approximately 5-7" in width to be installed in a day.
I would like the crown moulding to be already painted or primed white. Installation is fro a new home main floor with four rooms and a foyer.
I would like an estimate via online or phone.
We are currently looking for a millwork firm to work with us in providing design services along with build services. We own a large commercial building with 4 storefronts in downtown Hamilton that will be undergoing facade improvements.
Our ideal firm would be able to assist us in the design process and provide us with drawings that we can present to our client for feedback and approval. From there, we would require timely execution of the work.
Please reach out to us if you think your firm can be of assistance working with us on this project.
My driveway is currently stone. There is approx 400 sq feet to be paved. At the same time I want to fix the entrance way, the stairs are builder steps and way to deep for my father to walk up. I am open to ideas as this is the first time I am doing this. Also depending on the price and if financing is available that would of course determine materials etc.
I would like exterior stairs put in in Hamilton with landings and a separate entrance. The stairs would start at the backyard and go to the second floor. I would like the contractor to also take care of the required permits.
I want someone licensed with references. I will purchase the materials.
I am opening a business on the Hamilton mountain. A contractor who built an addition for my home is removing a partition wall but he is extremely booked up at the moment and isn't available for the finishing work, a little framing, trim, potentially installation of some doors if I can find the size. This work would need to be done around end of September, beginning of October. Interested?
Remove/repair 2 upper (3rd level) fire escape landings and remove and replace 1 fire escape roof (3rd level). Upper landings are rotting and the beams and support posts need replacing. Possibly some replacement of rim joists, stair stringers and floor joists as well. Job must be seen.
We need the header over our 6 ft living room window replaced. We had an open porch above the window and had water leakage. This appears to have rotted the header. The porch has since been enclosed. The ceiling above the window has now sagged about 2 inches. The window has California shutters on it as well.
1) install 5 bi fold doors, + 3 pre hung doors where the door jams will probably need to be cut off 1 inch, tiles installed under those door frames, + 6 doors that do not have to be cut. as they will be cut off by the hardwood installer.
I can cut them out and remove the existing door frames, would like to sell them on kijiji.
2) replace hand rail and or install new oak on existing carpeted stairs ( 13 steps )
3) installation of about 1200 sq feet of 4 1/4 inch hardwood flooring in 6 rooms, 1 room has a fireplace in it.
4) trim the 14 doors, + 3 more, the 5 bi fold and 3 exterior doors 1 side only, the rest both sides. + about 700 baseboard feet, with a 5 inch and 1 inch ( corner round )
would like doors installed within the next week or two
stairs withing the next 2 to 3 weeks
hardwood about 4 weeks
trim within days after hardwood
I live in a small condominium building. There are two floors with one unit on the ground floor and a second above. I live on the second floor. Access is either through the front door or the balcony door. I am thinking of installing crown moulding in my living room which extends into the dining room and hall way. One area of installation would be the ceiling where the stairway goes up into my unit. My ceiling is popcorn. At this point I am not seeking a quote, but seeing if anyone out there would want to take on this job as I contacted someone else who did not want to do the job because it is in a condo.
We have some baseboards that are old and need to be repaired ( 15 linear feet). Trim work for indoor wood stairs to make it look less rough (12 steps). We have an old side kitchen door (single door) that we want removed and filled in with glass blocks.
It would be helpful, If you can give us a rough estimate of how much this would cost before an inspection for a detailed quote.
We are renovating a new Jewellery Store and looking for a millwork-carpentry contractor to make custom one third vision showcases for displaying jewellery, the top part is glass and bottom is cabinet.
drawings and measurements are attached,
-The contractor must have insurance and WSIB certificate
-we are looking for the best price and a quality job.
If you are interested please send us a detailed quote that includes the scope of work, material used, delivery and labour and also preferably some of your former projects done as references.
Thank you very much
Hello! Looking to get my baseboards in my condo redone. They were very poorly done and I would like them replaced. I am looking for someone who specializes in this, as I am very picky and think the detail put into this work is very important.
Looking to get a quote for my condo about 800 sq feet. How long would this take?
Small porch roof is becoming a safety issue (wood composite pieces are now falling off the sides)
Likely needs full replacement - but I'm open to suggestion
Looking for a simple slanted roof structure OR a small peaked wooden roof.
On a 2.5 storey brick home, the whole porch is wooden.
Site conditions: Open space around porch area, home is brick - built in 1903.
The picture attached is Google Street View from 2015, so it's worse for wear now.
I have an older house in d/t Hamilton. The original stairs are too narrow, and are built across the width of the house.
I want to replace them with a straight run up the end wall (likely with a landing at the bottom, and a landing and 90 degree turn before the last 2 or 3 steps at the top) (which is what the stairs are like in the identical unit next door).
Photos 1 and 2 are existing stairs. Photo 3 is general idea of what I want.
The basement stairs will also have to be re-oriented.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started