Ever wonder what you're neighbours are doing to improve their homes? Discover what other Kitchener homeowners have planned for their Drywalling projects by reading the details of their request for quotes below.
In total, TrustedPros has received 24 Drywalling projects posted by homeowners in Kitchener seeking the services of local Drywall Contractors. Total estimated value of these projects is $192,000.00 with a per project average of $8,000.00.
|City||#Projects||Total Value||Avg Budget|
We need about 100 linear feet of dry wall up to 8 ft high plus the installation of 8 wood door frames and respective doors. Drywall ceiling for some partitions required and is about 300 sq. ft. Wood studs preferred but not mandatory. We're located central Kitchener easy accessible. We have the drawings online we can view it.
We are building a custom home in Kitchener, Ontario and are currently looking for an experienced drywall contractor. We are looking for someone to hang, mud and tape our 1358 sq ft bungalow home. We will supply all materials, and are looking to get quotes together quickly and start work around the end of April. We are available to meet on site, please email us and we can work out a time.
Scope of work for this is:
- hang, mud, and tape all board on the main floor (this includes cement board for the shower and tub areas of the two bathrooms)
- hang, mud, and tape board on the garage ceiling and wall between house and garage
- hang board for recreation area in the basement as well as one side of the hallway leading past the bathroom and utility room, as well as all exterior walls
Note: all materials will be supplied by owner
Before the contract could be awarded, we require:
- a firm quote
- schedule of availability
- several references, preferably of custom homes you have completed in the past.
Ian and Meghan
I am looking for a drywall contractor to complete board and tape of a Duplex.
The ceiling will require resiliant channel and two layers of 5/8" type X or 1/2" type X.
All walls and ceilings to be completed to paint ready.
Mech rooms to receive fire coat.
Ceilings to be California spray texture.
MUST have WSIB insurance and general liability insurance.
Please respond if interested and we can send you a floor plan and arrange for a site visit.
We are currently looking for a dependable drywall contractor that is able to both board and tape our projects.
Must be able to texture ceilings as well. We have a small basement project that could be started as early as July/19/2011.
Our projects will range from basement finishing to additions to bathroom remodels.
Respond to this posting if you are interested.
I am in need of someone to finish my drywall. Mud, Tape, Sand... Make it ready to Prime and Seal
The room is approx. 27' x 12' and there's a garage door on one of the 12' walls. The total approx sqft. of the room is 852 (900sqft. rounded up) (Ceiling 27'x12' = 324sqft, 27'x8' x 2 = 432sqft, 12'x8' = 96sqft)
Can you please quote me an approx. total cost and provide your contact information. I live in Kitchener, ON
I am a Mike Holmes believer. Do It Right The First Time.
I am currently on a job and looking for a price to finish about 900 sqft of drywall.
Consists of a bathroom that is 93" x 93"
Another bathroom that is 75" x 60"
And 2 walls in a kitchen 120" x 124"
If this job goes well I have another full house to be done in a couple months and a 2200 sqft attic.
The current drywall must be removed from all walls of the double door garage and the ceiling as well. Remove all insulations.
One week of pause to move plumbing, central vac and a few electrical services to be concealed properly.
Increase the back wall of garage from 4" to 6" depth and reinsulate. Complete drywall.
Current Situation: A Single car garage that is insulated with Styrofoam.
To properly drywall the ceiling and 3 walls in this single car garage. ( The garage door does not need any drywalling :) )
This has to be done after installing the appropriate structure, if required, to hold the dry wall.
A conduit for 240Volt must be installed from the back of the garage to 3/4 along the wall into the driveway. This conduit will be used to run a 240Volt for a electric car charging station.
The work should be coordinated with the electrician that will be installing the car charging station to avoid re-work.
Of course all this work must meet all current building and electrical code and, if required building permit(s) must be obtained. (The electrician will get the appropriate permit for the electrical component of this work, unless some efficiency can be gained through collaborative work)
I am in the middle of bedroom renovation, and I am looking for someone to come in and hang the board and mud. I would like them to put the first coat of primer on the walls to seal it up and ensure it looks clean.
The size is approximate 15 by 20 which includes the ensuite. This project will also include installation of drywall over the existing ceiling (standard 8ft)
My timeline is middle of October to have the drywall complete.
I have a house from the 1977 and it had popcorn ceilings every where and I put up drywall right over top.
I am looking for someone to mud and tape the ceiling for me as I am not that good at it .
There is around 570 squair feet to be done. looking for someone before Christmas
I am looking for someone to mud and tape the upstairs of our house.
The drywall is already hung.
The total square footage is 400sf. There are two small bedrooms, a bathroom, hallways and a few closets.
Ideally looking to have it done by April 15. I know, super tight timeline.
We would like an approx quote. We are planning on buying a house that needs some repairs. One of the repairs, is the need for a new skylight, plus removal of approx. four to six 4x8 panels of drywall plus possible insulation. We can either purchase the skylight via or buy our own.
The repair is on the second floor of the house with a cathedral ceiling.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started