Ever wonder what you're neighbours are doing to improve their homes? Discover what other Milton homeowners have planned for their Electrical projects by reading the details of their request for quotes below.
In total, TrustedPros has received 71 Electrical projects posted by homeowners in Milton seeking the services of local Electricians. Total estimated value of these projects is $203,500.00 with a per project average of $2,866.00.
If you're in need of a contractor for your Electrical project, use our job posting tool to get matched to local pros or browse our directory of Electricians in Milton .
City | #Projects | Total Value | Avg Budget |
Mississauga | 340 | $3,197,000.00 | $9,402.00 |
Brampton | 263 | $1,049,000.00 | $3,988.00 |
Hamilton | 272 | $1,141,100.00 | $4,195.00 |
Oakville | 154 | $589,500.00 | $3,827.00 |
Burlington | 121 | $639,500.00 | $5,285.00 |
Georgetown | 19 | $77,000.00 | $4,052.00 |
Dundas | 28 | $81,500.00 | $2,910.00 |
Waterdown | 15 | $44,500.00 | $2,966.00 |
Milton | 71 | $203,500.00 | $2,866.00 |
Basement is in the process of being finished. Need the dryer outlet moved to the other side of the basement. This work would ideally be done ASAP. The wire runs through the upstairs so not sure what best way would be to move it to the other side of the basement.
The next part would be the electrical boxes and lighting. This would be done a bit later (after framing is complete)
Looking for estimate on just the first part of the job with other work to be estimated maybe on site.
House is 5 years old , 2200 sq. feet, basement is un finished
Looking for a pony panel to be installed next to main panel, 3 15amp 120 v circuits to be installed in basement, 1 15 amp 120 v circuit in kicthen.
Gas line to be installed to kitchen for gas stove, and gas line to back yard (feet to kitchen about 15 feet to our back yard 30 feet
Looking for December 2nd 2011
Looking for an electrician with references to hook up 5 circuits to my panel. The circuits have already been run and secured, they just need to be hooked up. Also, an inspection of the work already done (rough in) would be helpful.
Please send me an estimate and your contact info/website.
Thanks,
Agnes
Electrical Requirements
Attached please find the drawings for the project.
There is no electrical indicated on the drawings.
The existing panel is located on the basement plan by the existing furnace to give you an idea of length of runs from the panel.
We do call for a sub-panel as well.
The electrical price shall include rough in and finish and obtaining electrical permit as well as coordinating inspections and as follows.
All material listed below shall be supplied and installed by electrical contractor.
Outlets and switches shall be white "Decora"
1 sub-panel( 24 breaker)
14 duplex outlets
2 exterior GFI outlets
2 interior GFI outlets
6 light boxes
10 single switches
4 3-way switches
3 slide dimmers( low voltage)
10 halogen low voltage pot lights( halo or equivalent)
10 exterior soffit incandescent pot lights
1 vapour proof shower light
1, 220 CFM bath exhaust fan
2 combination Smoke/CO detectors
Power wiring for whirlpool tub
Electric radiant floor heating shall be installed in bath only over garage
All switches, dimmers and receptacles shall be white €œDecora"
Should you have any questions, please feel free to contact me.
Thanks,
Debi
Hi,
I'm based in Milton and would like a quote for items listed below:
Must Haves:
1. Basement Light - replace cord used to switch light on & off (or recommend a better solution) - we have 3 of these in the Basement
2. Add an automated timer for outdoor Porch & Pot lights. Will need guidance on which timer/equipment to buy
3. Kitchen outlet always trips and needs to be reset several times a day
4. Replace Bathroom light switch plate
5. Replace outdoor pot lights (ground & upper floor)
Nice to have:
6. Replace Porch, Bathroom & Bedroom lights. (Note: we haven't bought replacements yet)
7. Additional outlets on the main floor
Thanks
Recently mounted a TV over the fireplace. Looking to add a power outlet behind the TV. You will have easy access to the wall behind the TV and I'm okay with you making holes, as long as it is neat and can easily be patched. This is on the main floor and the basement is unfinished. Looking for the needed certificates as well. In addition, since you'll be bringing power there, I'm also looking to build a conduit for all the tv cables. Looking for the best price and am willing to do a cash deal.
Hi. I'm looking for someone to change my panel from 100 amps to 200 amps. We also will need the feed into the house changed from aluminum to copper. We would do it ourselves, but Milton hydro isn't too excited about that, so we'll need someone licensed to do this for us.
We can buy the panel ourselves, but if you can get us a great deal, I'm interested to hear what that would be. Please quote us on the labour including and excluding material (as we can get all the materials if needed).
Siemens required as we currently use a lot of Siemens breakers.
Thanks!
Electrician needed for commerical sign. Channel letter electrical signs on the back of wall block.
LED Individual Channel letters 18 and 12' height
Plexiglas 2447 White 3/16'' with 1'' white trimcap with
0.06 backer welded to 0.043 return in 4'' deep painted White
105c-600v processed wire from primary electrical
mlps -250-12d constant current power source with 12 volt & 250 w output
Wiring from led lighting to the mlps 250-12D and to power supply
Electrical Notes
Each sign must have 1. A minimum of one dedicated 120V 20A circuit
2.Junction box installed within 6 feet of sign
3. Three wires: Line, Ground, Neutral
Hello,
We are finishing our basement and will have the electrical wired and set up by end of today. We would like to hire a certified electrician to inspect the work and ensure that all the wiring is up to safety code and I believe put a Ontario Sticker on the electrical box. We would like to have this done on Wednesday July 20th. Tomorrow.
Please let me know.
Thanks
Sharon
Hello,
I need an electrician to fix my bedroom light which is attached to the ceiling fan. For some reason, the light is not working. i tried replacing the fluorescent circular tubelight too. My ceiling fan is working. Can you please provide me with a quote as to how much would it cost me to fix it?
Thank you.
Regards,
Murtuza
Master bedroom, move electrical switch from behind entry door to right-side of door then extend electricity over to new walkin closet switch and up to new ceiling light inside closet (have all switches, boxes, wiring for this small project, required completion by Apr 13 Sat). Other work to follow will be in kitchen with new installation of microwave combo fan with new electiricty to panel in basement below; in livingroom with fireplace electricity added back to panel for fireplace fan installation; and later electrical plugins in basement when finishing basement next year.
Milton semi-detached home, built Nov 2002 by Mattemy Homes .. upstairs is void of carpet, doors and furniture .. have resin step ladder and disposable clothing for attic work.
I am wondering how much it would cost to have someone install an Over-The-Range Microwave.
The old rangehood has already been removed. I have a brand-new, still-in-the-box OTR Microwave to put in its place.
If the price is reasonable, I would like to get this done within the next 2 weeks.
Please provide your price and whether you would be available sometime within the next 2 weeks.
Thank you :)
Photos of kitchen are enclosed. Need a new outlet that ties into existing ceiling light or range hood (hard wired) with outlet placed above cabinets. Need it to run wiring for under cabinet LED strips.
Suggestions on how to extend wiring to cabinets on other side of kitchen are also welcome (photo with microwave).
If its easier, open to running new line depending on cost.
In our kitchen,
8 pot lights in main kitchen, currently three lights on two switches, moving to 8 pots on one switch, plus one light in pantry replaced with one pot.
4 new plugs wired in (two island and two in pantry)
Remove old outlet beside fridge that will be hidden by new cabinetry
Change old switches / outlets to match new ones
Panel is currently "full' and needs to be rewired / new breakers.
We have drop ceiling in basement with good access.
Hello, We're renovating our kitchen and we need a good and reliable electrician to begin the process (rough-in) as soon as possible. Here's what we need done:
6 new pot lights
1 pendant light
move oven receptacle location
install outlet for TV
remove one outlet and replace with 2 new ones in other locations.
move hood range wiring
install outlet for island.
run 2 new lines for all this
We're looking for someone reliable and trustworthy who actually returns calls so we can get this work completed!
Hi There,
I know this might be hard to do without seeing but we purchased a new house in Milton and we have a week to do renovations before we move in due to short time frame. We dont have access to the house again until we get the keys so it makes it very difficult.
This is what we're looking for and needing a quote for. I'm hoping you will be able to help us out and also work with the short timeframe we have. We get the keys on June 15th and we have to move in June 23rd.
We are looking at removing a wall from between the living room and dining room. The living room size is 10feet x 11feet. The wall needed to be removed is 11' wide and 9'high. We will remove the flooring but will need a new subfloor installed. We will also need a electrical plug removed from the wall being removed and a new one installed on the adjacent wall. We will also need a new drywall ceiling installed with 4 pot lights. We will do the painting and trim.
breakdown:
- removal of wall
- install new drywall walls & ceiling
- mud the walls and ceiling
- electrical moved and installed
- 4 ceiling pot lights installed
- subfloor installed
Could you possibly provide a quote and possibly advise if you would be able to work with this short timeframe.
Thank you.
Cynthia
We have a 2400 sq ft open space. We need to install 4 private rooms within this space. The building is 10 years old. The new rooms (approx. 12 ft by 5 ft) do not need any plumbing. Electrical outlets would be needed in each room. Sorry for the lack of info! We are looking for a very rough ball park range just to get an idea of financing.
Hi,
Looking for a quote on the following,
1) Painting a 150sq/ft (approx) room in our basement that currently has builders paint (light cream colour). Looking to paint the room standard white, some minor patch work required. Walls only, no baseboards.
2) Potlights installation in basement. Total of 22 potlights, no additional switches needed.
Thanks
Hi, we are looking for a good crew to install pot lights all around our home, along our interlock driveway and in the backyard surrounding our patio and pool. If we could get someone before the summer ends preferably first week of August that would be a blessing. To further discuss, you may reach me on my home phone or via email.
Thank you!
Ben
I need a licensed electrician to install (labor only) between 25-32 pot lights all in main floor (9ft ceiling). I will supply pot lights (Contrast Lightning GU 10 bulbs line voltage), wire, switch/dimmer, circuit breaker(if necessary). I will require ESA permit. Basement is not finished. Pls provide labor price and your availability. Thank You
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.
Click here to get started