Ever wonder what you're neighbours are doing to improve their homes? Discover what other Mississauga homeowners have planned for their Cabinetry and Millwork projects by reading the details of their request for quotes below.
In total, TrustedPros has received 45 Cabinetry and Millwork projects posted by homeowners in Mississauga seeking the services of local Cabinet Makers. Total estimated value of these projects is $294,000.00 with a per project average of $6,533.00.
|City||#Projects||Total Value||Avg Budget|
We are looking at having a wall unit and new mantle for our tv room. Currently, the wall is an estimated 14 feet wide by 8-9 feet tall. We have an existing fireplace that was a woodburning stove and is now converted into a gas. The fireplace has a concrete trim about 1 1/2 feet away from the ground. We would like the following changes:
- built in cabinets and shelving, floor to ceiling height, we are open to different ideas/suggestions
- we would like the option of having the television above the fireplace
- we would like a mantle to be built around the fireplace, the current one does not have a mantle
- we would like some form of lighting built into the shelving, but its not a necessity
Our home is 42 years old, we like contemporary style, we are open to doing some work if necessary to reduce our costs.
We could send a photo of the wall if necessary, just ask.
I need to complete the renovation of my kitchen. Current contractor is stalling. Essentially, it's to procure 6 white cabinet doors (MDF shaker style doors) and to install them. Plus, replace hinges on one door with soft close hinges + caulk the top crown moulding.
I'm located in the Winston Churchill + 403 area.
Looking to get this job wrapped up by Jan 1, 2013.
We would like built in shelves on either side of our fireplace in the family room, probably half way up, might be full wall depending on price and design ideas. There is 44" on one side and 46" on the other. Looking at maybe a cupboard for electronics and some open shelving, pot lights etc.
Also looking for a built in computer desk, drawers and/or bookshelves upstairs in the hallway/landing. The dimension of the space is 6.5' by 9'.
Finally, a laundry/mudroom rework with cupboards, cubbies, new counter etc. May even move washer/dryer upstairs, leave as a mudrrom only. The size of the room is 9' by 7'. The floor has been retiled in the past, so just the carpentry needs to be done. Looking for some ideas, have some of my own also. Would probably start with the family room and then move on to the other spaces.
Project date would be in the new year. We are expecting a baby in early February, which may affect the project. Must be discussed...
I need my brick fireplace covered with oak wood with a thin acanthus corbel on both sides of the mantle; maybe with flutes on both sides too. AND I want a built-in seating/cabinet/bench that is 27" x 55 1/2" with cushion (I can make the cushion if u don't do it).
Any referrals please?
Any cabinets/shelves within the office over 6 ft need to be secured to the wall to be compliant with our Health & Safety audit. I believe we have metal studs in the walls so that is why we want a contractor to do this rather than internal staff. There should be 4-5 shelves in total, a very small job.
I need somebody who can help me build and design a small bar in the basement.
Also I need help in putting cabinets in the laundru room 1 and half top.
I also want to buy a unit in the store for walk in closet that will need instalation as well as some shelves on the other side of same closet.
I need some shelves in the bedroom closet to unitilize the space in it.
I also have some small odd finishes I need assistance with around the house.
1 year old house locate in Mississauga, Nov 12 estimated time for project start
To install additional kitchen cabinets: 3 top cabinets (2 of them 70X30X100 and 1 half wine wrack half cabinet 50X30X100), and 3 base cabinets (2 of of them 70X30X90 and the middle has drawer up. The counter is formica 35 cm W and 193 cm L and it is has to be connected to the existing island (same material)
I have pictures of the site and drawings of the cabinets with the accurate measurements
We want to install an Over the Range microwave but our cabinets that are over the stove drop down too low. We need to have them shortened by 4-inches.
Would it be possible that someone would be able to re-work/re-modify the existing cabinets and make them shorter?
The original; cabinets are from Raywal and they are able to provide a shorter cabinet over the stove version€BUT, it would take them 6 weeks to have it built.
We need it done much quicker than that. If you could offer any assistance or insight on how we might get our little modification done, I would really appreciate it.
Hi.... We are in the market for a new refrigerator but the problem is the cabinet that is over the current refrigerator. It is too big to accomodate the new heights of the more modern fridges.
What we are looking for is to keep the current cabinet but make it smaller (half) so that we can accomodate a fridge that is 69.5inches in height. The current fridge height is 64.5 and the fridge just fits under it.
The cabinets are stained oak and the cabinet is an end unit that is beside the patio door.
Refinishing my existing kitchen cabinet doors and drawer fronts in dark brown single tone colour.
My existing cabinets and drawers are real wood, most likely oak and a light blonde colour. I want to be more modern by going dark which will also compliment my granite counter tops.
I do not want anything new and over the top budget wise, I want to be able to use all my existing cabinets, drawers and hardware.
Pls provide approx. on-line quote for spray painting cupboards & staining bottom wood trim of kitchen cupboards - 28 cabinet doors & 8 drawers with trim about 3 in. high. Cupboards & drawers are laminate (white with grey oak stain bottom trim) & are 16 yrs old. It is a large kitchen & new countertop will also be installed to update kitchen for re-sale. New colour will be antique white/cream.
I have 210 inches of cabinetary that I need to have Kitchen Valenences installed so that I can have under-cabinet lighting (My brother is an electrician and he will be doing my lighting) - I just need someone to supply and install the valences that cover the lighting.
Size: 210 inches
Corners: 4 @ 90 degrees each
Cabinet colour is a dark brown - chocolatey colour.
I would like the valences to have a bit of a design on them rather than just plain. Please provide quote for supply & install, and just install (I can buy them from Rona/Home Depot but that would take 6-8 weeks for me to receive them).
My kitchen has about 30 (melamine/thermofoil???) rasied panel doors. Seven of them have significantly yellowed over 11 years. Two have the coating badly chipping off to the point where I could peel away. Structurally all is well.
I am selling, so I don't want to replace all of the doors.
Can the 7 bad ones be recoated to match the current colour of the 23 good ones.
I look forward to your calls. Work can be completed next week (doors taken away on Wednesday)
I have a 60"high x 45"wide x 23"deep opening in the family room that used to house a projection tv. The opening is about 12 inches from the floor. The tv has now been removed and I am thinking of having shelving built into the opening and framing the outside of the opening all the way to the floor , or perhaps just the edge of the trim, so it looks like a finished unit. The unit will be painted the same colour as the wall so it doesnt necessarily have to be good quality wood - just well made and inexpensive.
Please provide quotes to my email address
I would like to have a smal cabinet built for the kitchen. Approx 4' long at the back, 3'long at the front, 36" tall (height of counter), and 16' deep. 2 shelf wine rack at the front (for 8 bottles) and a drawer above the wine rack. I would like the cabinet to have a ceramic tile top (I have the ceramic tiles) and the colour of the cabinet is to be antique white. As current cabinets are not wood (mdf or something similar), new cabinet can be made of same material. I would like a quote for this job.
Remove existing Knee wall, 3' high .
Replace with stair railing .
25 year old town house. 14 stairs from 1st floor to second floor.
4 stairs from first floor to landing , turn and continue to second floor.
Stairs are carpeted and that will remain.
Minor dry wall work will be needed approx 3' high by 7'' wide on wall at the foot of the stair and on the second floor.
this is a small job but needs an experienced person to accomplish.
I want to change my old house layout to open concept by removing wall between kitchen and dining room and replacing it with kitchen island or bar table (??).
Please provide me with the rough estimate - wall has only door opening now.
There are more changes to be done s.a. shower cabin replacement etc. to be done later.
BTW. do you provide your own selection of shower cabin units ?
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started