Ever wonder what you're neighbours are doing to improve their homes? Discover what other Oakville homeowners have planned for their Framing projects by reading the details of their request for quotes below.
In total, TrustedPros has received 45 Framing projects posted by homeowners in Oakville seeking the services of local Framing Contractors. Total estimated value of these projects is $2,708,000.00 with a per project average of $60,177.00.
If you're in need of a contractor for your Framing project, use our job posting tool to get matched to local pros or browse our directory of Framing Contractors in Oakville .
City | #Projects | Total Value | Avg Budget |
Mississauga | 76 | $7,216,000.00 | $94,947.00 |
Burlington | 36 | $788,000.00 | $21,888.00 |
Hamilton | 46 | $417,000.00 | $9,065.00 |
Brampton | 50 | $1,626,500.00 | $32,530.00 |
Milton | 25 | $358,500.00 | $14,340.00 |
Etobicoke | 21 | $540,500.00 | $25,738.00 |
Oakville | 45 | $2,708,000.00 | $60,177.00 |
I have a wall in the laundry room (basement) where an adjoining wall is finished. I would also like to finish this wall as I would like to install a hair washing sink. Looking to find out the cost to frame and drywall it - including materials. The wall is probably 8 feet long (will confirm measurement).
Remove and dispose of existing builder insulation and strapping on exterior walls.
Frame all basement walls
Strap ceiling with 2x2
All wood construction
~175 2x4 required
You supply all required material. I will pay $1000 for supplies (wood, 32" pre hung 6 panel doors, Roxul insulation for all interior and exterior walls, vapour barrier, tape, screws, nails, roll foam for floor....)
Frame bathroom walls and laundry room walls. Frame shower area for prefab shower unit.
Frame and Install doors - 1 bathroom and 1 laundry room.
This includes around windows, stairs case and bulkheads
It is untouched since the builder
This job is a 3 day job for 2 experienced framers.
I will pay $600/ 10 hour day for 2 experienced framers. The job MUST be fully complete and ready for drywall in 3 days.
Untouched since the builder.
Starting asap.
Please provide a quotation including all the materials and labour for the framing of a home extension. Total is about 1,550sqft (basement, two stories and a roof). The home is located in Bronte, Oakville. Work will start around the last week of October. Please email me for PDF copies of the drawings/plans.
Chris
New 3000 sq ft addition framing construction as per drawings which includes demolition, protection of the old house against the elements support on the supply of all necessary framing materials, Joists & Trusses, building and securing subfloors, exterior & interior walls up to the roof, installation of exterior boards on walls & roof, preparations for & framing finishing as required after plumbing, heating & electrical work is completed. Includes supply; & install of lower floors re-structuring and reinforcing as per drawings & code. Responsibility ends when passing inspections.
If this job description cannot be completed by you, please send us your comments.
Hello we require the following work be completed commencing this Friday or Saturday:
- supply labor to install steel stud frame approx 700 sq ft ceiling, steel stud frame approx. 20 linear ft by 14 avg height
- supply labour to install T-bar approx 73 sq ft
- supply labor to install drywall for 1500 sq ft ceiling plus 3150 sq ft walls total 4650 sq ft approx, to hang corner bead
- cut out pot light locations, provisions for 3-4 access panels
- supply labour to tape mud sand walls to a level 4 ready for paint
- supply labour to prime and paint 2 coats on all walls and ceilings
- mount air curtain above front entrance door
- supply labour to install sound proof 90 linear ft by 14 avg 1260 sq ft
- install 5 pocket doors and 2 swing doors with kits hardware reinforce frame as needed
- paint and install 205 linear ft of baseboard
- remove dispose 1100 sq ft existing sub floor 1/4" plywood subfloor and install new 3/4" plywood sub floor
- Install 1100 sq. ft of vinyl plank floor
All bulk materials supplied, minor needs for materials can be purchased and billed back at cost
looking for lead framing carpenter for residential construction projects -
additions and new construction. projects in oakville, burlington and mississauga.
10 years experience, able to read working drawings, hand cut rafters and stairs.
good pay and challenging work.
please email us detailing your experience and availability.
thank you
We are looking for qualified trades/contractors to provide take-offs for various aspects of our house building project in Oakville, this is a 3100 double story (plus basement) house to be constructed in place of an existing house, so includes demolition, excavation, foundation, framing and everything else till finished. We are soliciting take-off for material and/or labour for all aspects of construction.
Constructors/Individual trades welcome to contact and submit bids.
Hi I am looking for a door frame (door frame only for exterior door 32" by 96" (left hinged out swing frame)
The frame width should 8" with a 9" sill.
I have the door but it was framed with the wrong mount.
Options at this point
a)
If you can make the frame and mount the door at your site i can bring the door and pick up.
B) you install frame and door onsite.
I have a home inspector who requires me to get professional advice from a framing contractor regarding possible truss uplift. The shingles have lifted in about a 1' x 1' area on our vaulted ceiling exterior.
I've attached images. this does not look like an issue but the inspector requires advice from a certified contractor
Looking to get a budget price to frame a new gable/hip roof over an existing flat roof in Oakville - the flat roof has condensation/mould issues the way it was built - just looking for an idea on labour pricing for framing/sheathing/eave/soffit framing etc - we will purchase materials and take care of other trades. Approximate flat roof dimensions are 50' long x 30' wide -- I can send photos/sketches.
General contractor requires framing crew to remove main floor of a side split and build a second story above which includes a master bedroom, bathroom and den also require front of house bumped out approx 26x10 ft. Remove and protect existing area over living room and kitchen approx 26x22, second floor and roof framing for second storey addition 26x28 deep, Interested parties who are able to commit to a mid to late start date in July please respond and who can do it in a timely manner prefer to hire local crews/
I require the services of a framer with roof structure experience to add a rake and fly rafters to an existing gable end which currently ends flush with the front wall of the building. I anticipate this will require that a portion of the existing roofing will need to be removed and the rake integrated with the existing roof structure and sheathing. The gable end framing may need to be reworked as it looks marginal to me. The house is essentially a single story cottage so the roof peak is quite low. Existing roof structure is 2X4 rafters with tongue and groove boards. Quality and appearance is critical as this is part of a longer term renovation plan. Scabbing something on the end will not do it! In addition there are 4 or 5 existing rafters which have bowed putting a dip in the roof - these need to be sistered or replaced. Timing is crucial as a complete re-roof is scheduled to start November 6 2006. The job needs to be completed well before this date and made temporarily weatherproof.
We are expanding.
I can provide trades with consistent work.
Please email me with what your trade is, references, and how you price.
I look forward to hearing from you.
If you are a general contractor please don't respond. I am looking to deal directly with trades.
Thanks
Dale
Hi,
Looking for a quote for this area which is on the second floor of our house. We require some framing, drywalling, laying of subfloor, painting and five LEDS.
The area is approximately 21’ by 14’.
The joists will require some sistering to even them up to accept drywall.
About a foot below where the joists converge there will be a flat framed area with a grill to allow for air circulation
The floor is to be re-boarded with sheeting finished one side.
About a foot in from the perimeter, we want to put in a knee wall maybe 10” high. A second framing will be required in approximately the position of the vertical 2x4s in the picture. The framing is three sided, and the idea is to have a track, like used for sliding wardrobe doors, to drop panels into to enclose the storage areas behind. These panels would be about 48” square, and be secured at the top with latches. We can probably use the same material as for the subfloor.
The wall that can’t be seen in the pictures (which has the entry door from which the pictures are taken) also requires drywalling.
Also, please quote a separate amount if the loose wood shown in the area needs to be removed. Someone is supposed to be taking it, but not sure that they will in time for work to commence.
Thank you, and we look forward to receiving your quote.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.
Click here to get started