Ever wonder what you're neighbours are doing to improve their homes? Discover what other Oshawa homeowners have planned for their Windows and Doors projects by reading the details of their request for quotes below.
In total, TrustedPros has received 56 Windows and Doors projects posted by homeowners in Oshawa seeking the services of local Windows and Doors Companies. Total estimated value of these projects is $404,500.00 with a per project average of $7,223.00.
If you're in need of a contractor for your Windows and Doors project, use our job posting tool to get matched to local pros or browse our directory of Windows And Doors Companies in Oshawa .
City | #Projects | Total Value | Avg Budget |
Pickering | 37 | $275,500.00 | $7,445.00 |
Ajax | 35 | $300,500.00 | $8,585.00 |
Whitby | 22 | $273,000.00 | $12,409.00 |
Oshawa | 56 | $404,500.00 | $7,223.00 |
Hello,
I'm looking for a quote to install an egress window in an unfinished basement - the job would require enlarging the existing builder's window, installing the window and digging/excavating and tieing into the existing weeping tile.
I'm not looking for a general contractor or someone that lives in the GTA/Toronto - we are only looking for local.
Thanks.
Ron
Require the services of a professional contractor to install 2 Exterior doors. Both the front and side door have been purchased. The first door is the side entrance to the house, 34" steel door in frame. The second door is the main entrance door, 34" door with side light. Both doors are complete with frame and ready for installation.
Contractor must have references and carry a full insurance policy.
Thanks
I need two interior doors and window glass replaced. I need quality, but economical, doors (used is fine) and plexiglass or something similar for the window. (We have an autistic child who sometimes pounds on the window.) Please give me an aggressive ballpark. I'd like to get these done quickly. Thanks!
Cut, build, and router new door jambs out of mahogany which I will supply. Hang doors and drill and afix door hardware! I will supply materials!! All door openings have been widened to accomidate new jambs! Door sizes 3 doors 78"x30"x 5"1/4, 3 doors 78"x24" x 5"1/4, 1 door 78"x28" x 5". Job to be started asap! Serious contractors only! If you can't do the job.... Don't phone me!
Need person who can build wall with door middle . Frame drywall mud and innstall door fram door build one door fram cheapest . Door must have light or top wall the glass brick ?? Cheapeat and lets light in but privacy . In bastment only one wall small and door in total lenth including space for door is 9 feet bit qide and 7 feet bit high. Its to make another bedroom for one of my five kids . I want know prices . The celing has bulk head one side so less wod framing needed wamt trim too . Was going so but better get professinal to do need quoites . Thank you
We would like a patio door to lead out to our backyard from our Master Bedroom. There is already a 5 foot window where the door would go. The exterior of the house is aluminum siding. We would require you to cut the opening for the patio door and install it. Exterior appearance does not have to be completely finished off because we are going to be getting new siding and the interior casing and any drywall repairs, can be done by me.
Home was built in 1920 and has some projects, the most pressing is a side door that doesn't close or lock properly. It exits onto the driveway, so a fancy door is not required, just something like Lowes entry doors, preferably with a small window. The current one opens into the house, handle on the left. Requirement is to remove the old gross trim around the door and the wood at the bottom, replace with new trim. Supply and install a new door (or I can do that with some advice on what to look for). Also drill holes and install doorknob, good solid lock. Prefer in-stock door as the door doesn't lock properly now. Prefer an experienced handy-man type person as there are a lot of projects big and small upcoming due to the age of the house. I have pictures of the current door that I can supply. I am not the home owner, my daughter is but due to her long shifts (she is a nurse) she has asked for help to get the project going.
The roof is flat and the ceiling has a lot of water damage. We would like to see what the cost would be to change it to a cathedral ceilling. There is not a lot of insulation in the ceiling and walls. (only 2") we would like much more. The floor seems fine and there is no basement under this room..200 square ft.
Our budget is $10,000.00. $50.00 square ft.
Our home is 50 years old and has 3 very large Picture windows I would like to replace 2 with flat window with sliders on the bottoms, and the front main window with a bay window. We also have 2 basement windows which I would like to have changed, a diningroom, kitchen, 2 bedroom, 1 bathroom all replaced.
I am looking for an estimate to have these changed.
I am looking a ballpark price for someone who can supply & install a 2'x3.5' window into a brick wall. We can cut the opening in the brick and framing to your specifications and do the interior framing (header, kings, jacks and sill), but I need an installer who can do the brickwork...angle iron, soldier course, correct brick mold on the window etc., supply the window and install it for me.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.
Click here to get started