Ever wonder what you're neighbours are doing to improve their homes? Discover what other Ottawa homeowners have planned for their Siding projects by reading the details of their request for quotes below.
In total, TrustedPros has received 62 Siding projects posted by homeowners in Ottawa seeking the services of local Siding Contractors. Total estimated value of these projects is $912,000.00 with a per project average of $14,709.00.
If you're in need of a contractor for your Siding project, use our job posting tool to get matched to local pros or browse our directory of Siding Contractors in Ottawa .
City | #Projects | Total Value | Avg Budget |
Nepean | 11 | $185,500.00 | $16,863.00 |
Gatineau | 17 | $301,000.00 | $17,705.00 |
Ottawa | 62 | $912,000.00 | $14,709.00 |
Require installation of eavestrough on second level as well as repair/patch/replacement of pebble dash stucco and decorative wood around Windows due to water damage from lack of eavestrough. Looking at different options to fix the exterior all dependant on cost. Should I replace the rotted wood and patch the stucco, or remove the wood entirely and replace all with stucco, or replace with siding? Please advise with cost differences.
Thank you.
My wife and I are planning to change the exterior walls from our house and the Bay window. Currently, the exterior walls are popcorn stucco, sort of old-fashioned wear out faade, which we want to remove and to change to a nice, updated style that combines wood, plain stucco or wood paneling and urban accent materials. It is possible that when removing the popcorn stucco the house will be in need of new exterior insulation.
Thanks
Jose Galdo
-------------------------------
Jose C
Associate Professor
I have a bungalow in Beacon Hill North that requires removal of existing siding and installation of new siding. Require material advice and overall estimate.
Work can start immediately,
Contractor must be familiar with Federal Government rebate for Green House Energy savings (up to $5,000).
Hi, during prepurchase inspection, the inspector reported that the one of the side wall (with garage) does not have a house wrap (like tyvek house wrap) below the vinyl siding. I want to get a quote for this job. Approximately the dimensions of the wall are length 30 feet, height 15 feet.
Strap and install 1800 sq.ft of vinyl house siding on a two storey house located in Vanier. Siding materials are bought and will be provided.
Install flashing around windows (8) and doors (2) is also required.
Strapping on house has been started but 2 upper sides are not strapped. House is stucco and brick.
Thanks,
Bill
12 by 16 shed
Victorian style with high peak
Looking to have vinyl "Clay" Board and batten installed with "Sand" vinyl corners
Plus, looking for "sand" aluminum fascia and soffit + installation
Located in Osgoode. Please provide quote for shingling roof as well if you can. We have shingles, edges, black paper and drip edge that will all be provided.
I have a side door in my kitchen that is no longer necessary (addition on the back with a second exit has been added). I need the door removed, reframed for a window, installation of the window, then re-doing the aluminum siding around the door. The area that will need new siding would probably be about 6' x 12' (minus the window dimensions).
Carpenter required!
Ottawa, Ontario : We have a tall all wooden-siding 2 story house - the squirrels have been bitten into the wooden siding. A pest removal company had put up wire mesh to block the holes - but we need them permanently sealed in some way - there are areas on side, front and back of house.
It is a 2 story wooden house - would you be able to do an estimate and email me with a quote.
Home dimensions 58 ft lg x 18 wide x 20 high. 3standard windows &1door in front,
straight run 58L x 20h no obstructions along 1 side opposite side 7 windows 1door.
Rear of home not to be touched. Sideing supplied-double 5 quality desighner.
Fflash all windows/doors 4in ,8x8 soffit install front porch &cap, excluding posts.
remove old and install new sideing .Contracter to supply flat stock/soffit materials.
WSIB REQUIRED.
Garage with Master BR on top built in 1988. We have photos of damaged area. We need to replace damaged siding which is less than 10 feet off ground. Sq. Footage is approx. max. 6 x 6 ft = 36 sq ft as siding has hole and several cracks across several siding slats. Available to provide photos of site and set up appointment.
We are in a 1930’s brick semi detached home and looking to have all the soffit and eavestrough replaces in addition to the shared porch area. We are looking for a quote for one side of the semi as well as both sides of the semi. We would like black material.
The existed wood soffits would have to be removed.
Hello:
My neighbours garage wall is right on my property line. It is covered by Tin and needs some replacing. I have mentioned to him that I would like to have the tin removed and have vinyl siding put on it. It is about 10 feet high by 16 feet wide.
Not a very large job but it would make by backyard look a lot nicer and cleaner.
60 year old home needs the second level siding to be installed(Aprox. 500 sqft). Original siding is off, and new sheathing, foam insulation and house wrap has already been installed. The siding material is fibre cement and has already been purchased and is on site. Looking for contractor with experience installing fibre cement.
My house is a semi-detached in downtown Ottawa, approx 100 years old. I want to replace the siding on one wall of the house, and improve the insulation of that wall at the same time. Currently there is some sort of shingling on the wall. The wall is fairly close to the neighbouring house. I also want to replace most of the windows in the house. Some are very old, others are newer (25 years maybe) and the seals have gone. 7-10 windows total, and possibly a patio door as well.
I am really hoping to complete this project in time for the Home Reno Tax credit (as I'm sure many other people are!)
A new three story building needs following works:
1. front side: stone
2. other three sides: corrugated steel (28 gage) with pantterns
3. on fire rated side, install the attached steel panel based the plan (I supply the materials because I have ordered)
4. all soffits and eaves
For detail plan, please contact me.
Looking for estimates for siding (wood, compressed wood or vinyl) for detached house in New Edinburgh. Also assessment of whether repairs or total replacement is required. Estimated square footage of house is 2300. We are prospective buyer of house. We expect to close the sale at end of March so we require an estimate ASAP but are flexible regarding when work would actually be done.
Please provide a quote to strap and install 1800 sq.ft of vinyl house siding on a two storey house located in Vanier. Siding materials are bought and will be provided.
Also, require a cost to Install flashing around windows (8) and doors (2).
Strapping on house has been started but 2 upper sides are not strapped. House is 50+ years old with stucco and brick.
Replace siding on two adjacent sides of house.
Side A is from 2nd story to roof peak. Approx 550 Sq Ft of siding with one 4'x4' window. Side B is rear of house. Siding from ground to roof line. Approx 42' wide by 20' high with 8 windows and 1 door... approx 200 sq ft of glass in total.
I have an apt building where the current Stucco on the East side wall of the building is coming off. I would just like a quote to install Siding on that wall of the building and to gwt a quote have that wall stripped and re stuccoed. and maybe some advice on which would be my best option.
Contact info:
Alex
I have an old, leaning garage which I don't want to paint anymore. Some wood is rotten and can't be painted. One side of the garage can't be accessed. I'd like to have the three remaining sides covered with vinyl siding. Please break your quote out by labour and materials.
I don't want to coordinate being there for quotes. If no one is home you may enter the backyard to view the side and back of the garage. Please e-mail detailed quote.
Garage Dimensions:
12.5' wide
Highest horizontal board on front of garage is 7.5'.
Peak is 10'
19.5 deep
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.
Click here to get started