Ever wonder what you're neighbours are doing to improve their homes? Discover what other Scarborough homeowners have planned for their Fencing projects by reading the details of their request for quotes below.
In total, TrustedPros has received 44 Fencing projects posted by homeowners in Scarborough seeking the services of local Fence Companies. Total estimated value of these projects is $178,000.00 with a per project average of $4,045.00.
|City||#Projects||Total Value||Avg Budget|
Area: Scarborough, Ontario
Wood: brown treated (please indicate price for cedar wood as well)
Height: 6" for side, slightly higher for street side
Size: street side 45" including 3" gate; side between neighbors 103"; front side 58"
Situation: there are about 5 trees (under 30 diameters) along fence line between neighbors; there are 3 meters small maple trees and flower bushes around street side. We would like to remove them all when do the fence.
Could you separate price for street side, neighbor side and front side? And separate separate details for labor, materials and others if any. We will share costs with neighbor for the 103" fence.
Our neighbor may do their street side and front side as well. Similar size and situation as us.
I'd like to have holes drilled into a stone block wall so that a Chainlink fence can be installed directly into the retaining wall. The wall is only about 1 foot high and it's about 15-20' long. I would need 3 holes drilled at the diameter of a standard Chainlink post. The fence already exists but it's behind the wall. I just need the holes to be drilled and the fence to be moved and cemented into the wall.
We have an existing 10x10 deck. We would like to extend it about 6-8' and do a privacy wall enclosure on two sides. Closing the bottom of the deck so no critters can go under.
At the end of the deck we would like a door to have access to the AC Unit and side of house. We already have a cedar hegde between the houses in the front.(again for privacy). There's a small front porch that we enclose with a solid wall, which now makes it differcult to access the back. Would like to have a door in place of the wall.
It's a semi-detached so we are really looking for privacy.
With regards of square footage and materials, my husband (Pierre) will answer all your questions.
I need to extend my concrete driveway approx 20 feet. The grade goes down approx 3 feet from front to back.. drive is approx 10 feet wide.. I need the grading to be flat in this portion of the driveway. I would also like a privacy fence built at back of pad and at front. Picture attached. Please provide an approx quote.
In the Scarborough Area (McCowan & Lawrence).. Looking for quotes to hopefully repair existing 57' x 6' wood fence in backyard which is starting to lean plus install a new fence being 42' x 7'. Both have trellace design at top of fence (1" at top). Looking for quotes and when your schedule would permit for work to be started. Pictures are attached.
Please let me know when you are available to view plus your contact information.
We require a fence to be built between neighbouring properties ( both sides of the home) One side is approx. 25 feet long, the other is 30 feet and will require a new gate. The 30 foot fence is in a narrow sideyard, and there have been drainage issues in the past.
The contractor must adhere to the property line as specified on a land survey which is in our posession.
Please provide a budgetary estimate for following fence relocate work:
- removal of 10 3" fence posts set in concrete
- removal of 25 ft of concrete burm (6"H x 12" D)
- removal of 25 sq.ft 4"D concrete walkway, cut 3 ft
- installation of 6 new fence posts (3" dia, 4'H)
- re-installation of 1 gate, hardware, chainlink
- 60 sq.ft sod
I Need fecning across back and one side of my folks property removed and a new installed. Looking for presure treat fence board-on-board 6-ft high . Back is 14-ft and side is 11' - 3". In addition is a 12' length of fencing on 48" high attached to side of deck on 2x10 joists.
Access to back yard is limited to 18" wide path. Back stretch is up against 4' chain-link that closes in a parking lot.
Please provide rough estimate and expected durration to do job. looking to have complete by end of May.
I have a pressure treated wood fence 5ft, with 1ft lattice top. 3 rotten posts broken off at ground level,concrete support remains buried, and 1 wobbly post still in the ground. The fence panels have been removed. What are the options and the cost involved for each ?
I am looking for quotes to repair (replace posts) and reattach existing panels or rebuild it from new wood.
Thank - you
Construct a fence not more than 6ft 6in height(excluding frost height about 4 ft under ground) , 65 ft length and one side 5 ft wide.Please give estimate for wood/pvc /chain fence to my email address
Also to remove bushes(thin line) about 30-35 ft and dismantle old wooden tool shed 8*6 and 5 ft height
Please give 2 separate estimates one for fence construction and another for removal of bushes and tool shed
We have 65 feet of fence that needs to be removed/ disposed of and replaced with a 6 foot tall staggered board pressure treated fence in it's place with no private lattice on top. One section is 35 feet long and then turns 90 degrees for another 30 feet. There are three small trees in the area and the grade is constant. The existing fence is old and is almost ready to be pushed down it is so decayed. This a backyard fence and is easily accessible.
I have an area in my backyard that I need fenced. It's just about 10' with 6-7'dead cedars in the way that would need to be removed. the fence should be 6' with a gate. The fence needs to be made of cedar and I am required to file a form to my condo directors to get this project approved.
please email me with a quote.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started