Ever wonder what you're neighbours are doing to improve their homes? Discover what other Scarborough homeowners have planned for their Insulation projects by reading the details of their request for quotes below.
In total, TrustedPros has received 41 Insulation projects posted by homeowners in Scarborough seeking the services of local Insulation Contractors. Total estimated value of these projects is $139,000.00 with a per project average of $3,390.00.
If you're in need of a contractor for your Insulation project, use our job posting tool to get matched to local pros or browse our directory of Insulation Contractors in Scarborough .
City | #Projects | Total Value | Avg Budget |
Toronto | 174 | $1,491,000.00 | $8,568.00 |
Oshawa | 28 | $106,000.00 | $3,785.00 |
Markham | 17 | $65,500.00 | $3,852.00 |
North York | 15 | $55,000.00 | $3,666.00 |
Richmond Hill | 22 | $63,500.00 | $2,886.00 |
Thornhill | 22 | $60,500.00 | $2,750.00 |
Ajax | 14 | $36,000.00 | $2,571.00 |
Pickering | 18 | $55,000.00 | $3,055.00 |
Scarborough | 41 | $139,000.00 | $3,390.00 |
I would like to request a quote on adding 4 ridge vents and blowing in insulation for my attic. I have existing soffit vents but no baffles. It's around 800 square feet, it's a back split property and there isn't much room in the attic. It is time sensitive so the sooner the better. Please let me know if you'd be interested in the project.
Thanks!
I am looking to redirect the two bathroom vents.
Currently they are sending the air through the roof.
I want redirect them to a soffit vent, and insulate the 4" vent pipes.
If I am happy with the work, you can add some more insulation to the attic and open up few soffit vents.
No need to worry about removing and patching the roof vents.
I DO NOT deal with general contractors.
Hi guys,
Looking to soundproof sections of my 550 square foot condo in downtown Toronto. The adjoining wall to neighbors on each side have noise escaping and I'm not entirely sure of the source. I feel like the source of the sound escaping could be pinpointed with the right tools. I'm curious what else could be used to dampen other sounds (eg. tv.music volume + bass)
Thanks
Aly
Due to impact noise from the unit above I have been told I need to insulate my drop ceiling (concrete then drywall) and put noise ruducing dry wall.
The unit above has laminate flooring without proper underpad. Therefore, causing impact noise to cause excessive noise in my unit.
i live in a condo/loft the buidling has 5 floors and is 2 years old. My unit is 780 sq ft. 10ft ceiling. I am not looking to soundproof my home but to reduce the noise.
I have a room I would like re-drywalled and insulated. The job would entail removing the current drywall and insulation and then insulating and adding vapour barrier. The room is 13x18 and 8.5 feet high. I may or may not want to replace the ceiling. 2 and a half walls are exterior walls. One has a door and a large window.
Looking to spray foam my garage which in approx 25 by 10 ft, in addition to the front overhang which is approx 10 by. 10 ft. The front overhang is covered with wood. I am requesting that the dry wall. and wood be replaced by the contractor.
I will demolish and clear everything before work starts.
Thanks
This is a 30year old house with half brick nd half siding on the exterior. It has 4 bedrooms, 1kitchen, 1living room, 1 living dining, laundry room, and a finished basement. My concerns is with cold drafts from electric outlets and bathroom exhaust. There are also cold spots on the floors both in the lower and upper levels. The walls are also cold. Windows are old with a lot of condensation.
The bedroom above our garage is colder than the rest of the house. Blown in insulation was suggested because there is already a complete ceiling in the garage. Would really appreciate an estimate from a contractor to get this done as soon as possible. I live close to work so I do not need much notice to let the contractor in for an inspection and estimate. Please call me to arrange. Thanks.
Supply and Install min. R12 batting 16 O.C. to a 36' x 51' newly framed house.
- 3 levels floor to ceiling ( fin. bsmt. ) complete exterior walls
- vapour barrier and tape - ready for drywall.
- 9 ft. high ceilings
Install R20 batting in all joist end cavities, all levels
Please Note: Framing is incomplete. Architects drawing available upon request.
However, the dimensions are above.
Only written quotes will be considered.
Thanks,
Frank
Looking for someone who has availability this week (June 24). Work must be inspected by city before continuing to drywalling stage.
Looking to have vapor barrier installed on ceiling ( 22X 24' Room , 6 Mil), insulation (R60)and vapor barrier for a number of walls, and a basement ( 1100 sq ft) ASAP.
I am a contractor and just purchased a 50 year old bungalow. I need your help to insulate my home to make it more comfortable and reduce my utility costs The walls in this home have no insulation and the attic has a layer of 2 " bat topped with aprox 6" of blown insulation.
Both these areas need attention to increase the R value.
Thanks for your time
Hey ~
Need someone give me the quote for relocate the sprinkler head (around 10). Aso need to know how much it will cost for spray sound proof insulation to warehouse steel celling (20 ft high around 3200 SF)
Supply & install 240 lft*18ft high soundproof wall (insulation&dry wall)
Ceiling tile around 4000 SF.
We would like to have a quote and an advice from you. One of the rooms in our basement is colder than the rest of the house and we are thinking to insulate the exterior walls. Also, we need somebody to look and make sure the electric part is done properly. We bought the house last year. If you can help us with this issues please let us know.
Thank you
My second floor is an extension of my house about 500 Sqt. As inside the house is not warm in the winter, so I want to add insulation on the siding. Please give me an estimation.
I do not know if you come to see or not. My house is on Midland Ave. and Sheppard Ave. in Scarborough.
Thank you very much.
Phillip
Hi
I have a small job for spray foam insulation.Area 17 x 9 with 9' ht walls. Total 300 sft per inch so 600 of 2" area.
I would like to go for close cell. Give me a call with specific material used and cost.
Job location is Brimley and Kingston Road. Job will be ready for spray on 6th July Friday.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.
Click here to get started