Ever wonder what you're neighbours are doing to improve their homes? Discover what other Toronto homeowners have planned for their Carpentry projects by reading the details of their request for quotes below.
In total, TrustedPros has received 273 Carpentry projects posted by homeowners in Toronto seeking the services of local Carpenters. Total estimated value of these projects is $2,290,500.00 with a per project average of $8,390.00.
If you're in need of a contractor for your Carpentry project, use our job posting tool to get matched to local pros or browse our directory of Carpenters in Toronto .
City | #Projects | Total Value | Avg Budget |
Mississauga | 133 | $907,000.00 | $6,819.00 |
Brampton | 80 | $420,500.00 | $5,256.00 |
Oakville | 52 | $1,332,500.00 | $25,625.00 |
Etobicoke | 27 | $89,000.00 | $3,296.00 |
North York | 18 | $150,500.00 | $8,361.00 |
Scarborough | 29 | $132,000.00 | $4,551.00 |
Vaughan | 18 | $157,000.00 | $8,722.00 |
Woodbridge | 15 | $92,000.00 | $6,133.00 |
Richmond Hill | 20 | $75,500.00 | $3,775.00 |
Markham | 14 | $107,500.00 | $7,678.00 |
Thornhill | 11 | $32,500.00 | $2,954.00 |
Toronto | 273 | $2,290,500.00 | $8,390.00 |
We are looking for a general contractor or carpenter to build a wooden sandbox in our backyard. We are thinking of one approximately 7 ft. by 7ft, with a lid. We would be interested in hearing design ideas, but not looking for anything fancy. The timeline would be ASAP and are looking to receive quotes and estimates in availability. Also, if you have experience with this type of job, please send any images or references that you have received.
Thanks!
James and Meghan
Build a cedar floating balcony 21'x3', including stairs. Use 3x(2"x6") beams, and 5/6 decking to minimize thickness. For posts use ~ 9" timber logs, sitting on 8" Sonotube footings.Use Pocket and Blind cuts into the posts to seat the beams.Stainless steel wire railing for minimum obstructed view.
Hello, I need a banister (approx 30" height, 5" diameter at the widest part) finished with high gloss white paint to replace a broken ceramic Watermarks basin leg. I will have a leg for your sample. Wonder if you would take up such small project. Thanks & regards.
Hardy
*Best to reply by text or email
Banner type install for brick above store window.
Size: 3/8 inch 12 foot by 32 inch plywood
I need to get this done this week if at all possible. I am prepping it so it will go quick (I'll have all holes in through sign and attached/bonded backboard strip on top backside), just have to raise it approx. 12 feet, drill through holes into brick, put high-grade glue I have in holes (&/or along back strip too), and put the screws in.
Essentially it's:
1. Lift sign (I can help, but we'll likely need some kind of cherry-picker/lift)
2. Drill (approx. 1 inch) through sign holes into brick
3. Calk/Install high-grade glue I have in attaching
4. Screw in masonry screws (Tapcon; I'm guessing say 14-20ish)
I got the rest.
Pls let me know ASAP Thanks.
Merrill
Require baseboard installed in two storey home. there is approximately 300 lineal feet to be installed as 110 pieces from a few inches long each to 14 feet.
the baseboard is in 14 ft lengths, mdf, and primed and painted. it is 1/2" thick by 6" high profile. Currently no quarter round foot, will see how level the floors are prior to decision on adding quarter round.
there are also six doors that will require trim to be put around. trim is similar to baseboard but with 3" profile.
Hello, I am looking for a handyman/carpenter to help finish the stairs in my basement reno. The main aspects would be to install new treads and risers over the existing stairs, and also frame/drywall/finish the area underneath (please see pics).
There are some other finishing aspects that I need help with. Ideally, you would be able to see the project in person and we'll do as much as possible within the budget.
I look forward to hearing from you
My wife and I are considering having a sandbox built in our backyard. We're thinking of something 6 ft by 8 ft. We'd like to hear some quotes and availability. Experience with this type of job would be preferable and any specific designs (seats on corners, etc.) that you have done/know would be great.
There is a 165 cm gap in the kitchen baseboard, due to a low level radiator being removed. A new piece of wooden baseboard is needed, to match the rest. The baseboard is a simple style, measuring 165 cm in length, 20cm in height and 1 cm depth. The baseboard piece needs to be built and installed.
There is a 165 cm gap in the kitchen baseboard, due to a low level radiator being removed. A new piece of wooden baseboard is needed, to match the rest. The baseboard is a simple style, measuring 165 cm in length, 20cm in height and 1 cm depth. The baseboard piece needs to be built and installed.
Crown molding was installed in the master bedroom, and the gaps under certain sections of molding need to be filled in.
Hi.
I would need some functional kitchen island and I'm curious how much it could cost to build one. Size should be around 120cmx40cm with sliding doors and shelves on the side. Material would be, I guess MDF, and ivory color, but still haven't decided what to put on the top.
Here is some picture as example so you can estimate based onclick here you
Una
Looking in to the possibility of building a treehouse. We live in North York. We back on to a ravine and have only decking- no grass but lots of trees! We have 2 kids 11 (with special needs some mobility issues but is able to walk) and an active 8 year old boy. Hoping for something to accomodate both for a reasonable cost and ASAP. Just starting this process so thought I would try to get some ideas and cost estimates. Hoping it might go around the tree on the left of the attached image.
Thanks
Hello,
We would be very glad to get an estimate for the following work:
4 shelves, sized 210x30 cm.
They will not go all the way to the ceiling, the lowest one would be about 85 cm above the floor, and then 40 cm between the shelves. So the upper one would be at 205 cm from the floor.
We don't mind if the brackets are visible, it doesn't have to be fancy.
The shelves are going to be between two walls, so their sides will not be seen (if it matters)
Since they are supposed to hold books, I wonder if there is need to make them thicker than 2cm, or if it's enough to just put more brackets in.
Thanks a lot,
Marva
Cafe located in the bottom floor and basement of a residential home near Dupont and Ossington. I am the owner of the cafe not the building.
Renovation job includes painting upstairs and the basement including bathrooms and kitchen as well as replacing baseboards in the basement.
Green highlighted area shows the final plans.
Benches and cupboards need to be removed along the wall.
Marble bar to be moved to the other side of the cafe as well as re-installing the water station. The cupboards will be made and installed by someone else and the fridge and freezer bought and delivered. Job to be done during the week of August 22-28
I am looking to get a Queen Size Loft Bed made. It can be unfinished to save on price. But I would like to also have some stairs going up to the bed that could also double as drawers.
I am moving into a very small room, and need to save space. The structure would need to be fairly sturdy as it is a Queen Size bed.
Good day,
So at this time I would like to create a closet. I have a wall in the master bedroom that is: 11 feet 8.1/4 Inches wide , 7 feet high and it has a bulk head that extends from the wall 2 feet 1 Inch.
I would like the closet to be flush with the bulk head if possible, however there are electrical outlets on the adjacent walls on either side and they come out 24 In which means the closet would cover the outlets by a bit if brought out the entire 2 feet 1 inch of the bulk head. I rather not move the electrical so if we can pull the closet back a bit at the bottom we can see how that would work, otherwise we can just make the entire closet just come out enough so the outlets are not covered and thus not flushed with the bulk head.
The closet / wall unit will serve as storage space but I would like to leave space in the center for a 40" - 42" in TV without sacrificing too much of the actual storage.
I would also like to create a closet space for house cleaning products (Mop, broom, dust pan, etc) The space sits on top of a platform and the building space is: 46 Inches wide, 6 feet 9.3/4 inches High and 25 inches deep.
If you can please let me know what each project will be individually and if you have a different quote for doing both projects, than please let me know as well.
Thank you for your time.
Due to water damage in a part of the basement I had to rip open all of the walls to determine the leak.
I'm in need of a carpenter and a electrician for the following:
Electrician - install more outlets as required in 3 rooms.
Carpenter - reinforce joists and ensure that the flooring upstairs is no longer sagging, build closets and box in sump pump.
I will need the carpenter & electrician to work on the same schedule as wiring is run through the joists.
We are doing a small renovation to our house. This includes three bathrooms and a basement gym area. I will need help framing, creating a curbless shower, installing a pocket door, some trim work, boarding and taping new walls and possibly getting existing walls ready for tile. Looking for all work to be completed this July.
1. Interior wood door to buy and have carpenter install needs framing to enclose finished basement entrance now open area under 2nd floor from main floor stir case to basement. Renovated house separating lower level from main with lock door.
2. Carpeted steps replace with wood 7 steps.
3. Re-Caulking around old bathtub.
Please provide hourly rate.
I purchased an antique church pew (9 feet long approx) and I want to have this turned into a "corner pew" for a breakfast nook. I
I also recently purchased new wood countertops from Ikea for my kitchen, and I need someone to cut them to the specific size that I need. The two pieces measure approx 2 x 8, and need to be cut into four carefully measured pieces.
There is a small yard at my house which could be used to do the cutting in. I cannot transport the pew or countertops anywhere, I don't have a vehicle that would accomodate this.
I am looking to have this work done ASAP.
Thank you!!!
We live in East York (DVP/Don Mills South) and built our house and now we need some custom work done. We have a large bay window in the living room and require a custom made bench with cushion on top and storage underneath. Also, we have a foyer where a custom made bench will be required also.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.
Click here to get started