Ever wonder what you're neighbours are doing to improve their homes? Discover what other Toronto homeowners have planned for their Electrical projects by reading the details of their request for quotes below.
In total, TrustedPros has received 353 Electrical projects posted by homeowners in Toronto seeking the services of local Electricians. Total estimated value of these projects is $4,028,100.00 with a per project average of $11,411.00.
|City||#Projects||Total Value||Avg Budget|
All electrical outlets on one wall, both sides lost power. No breakers were tripped. The outlets were working fine prior. This is an older condo building and the 2 bathrooms have no GFCI's. We'd like those installed (depending on cost) We'd like the work done ASAP but it's not an emergency.
Add 4 pot lights in bathroom: 2 in bath/shower (thinking on the bathroom ceiling fan switch) and 2 above vanity (replacing wall mounted light).
Move light switches: currently behind bedroom door due to bedroom wall added after initial construction. 2 should go outside bedroom (living room), and 1 stay in bedroom, but ideally they'd go on the other side of the bedroom door frame.
Move thermostat. Similarly currently inside bedroom, but should be on the other side of the bedroom wall (only a few inches away).
Note that I'm also considering doing the work myself, so if there's anything I can do to prepare the work and reduce costs, please indicate it.
I run a small accounting firm from a live/work space downtown toronto. i need qualified help to assess electrical panel and extend additional lines to make sure circuits are not overloaded. we have a new server that needs to get going and electrical work/assessment/fix has to be done first
Need to connect a bar fridge to the compressor that is 4 ft away.
There are two outlets on the compressor that connect through one 1/4 inch pipe and another slightly larger pipe to the bar fridge.
Looking for someone to come in and connect them so I can turn on my bar now
Location at Keele and Dundas
I am renovating my basement and am looking for an electrician to do the following;
a) review existing electrical setup and provide quote to to bring it to standard with appropriate permits.
b) install LED pot lights and receptacles.
c) install a 240v receptacle and move another.
Installation of bathroom fan in upstairs bathroom.
We have the fan purchased, insulated hose from the roof vent installed and wire from the switch already in the attic. We need the fan installed into the upstairs bathroom ceiling and the hose and wires (which may require a junction box) connected to the fan. Please note that attic is filled with the fluffy cotton ball like insulation. Licensed electrician required to do the work.
I live in an apartment building with some quite bad property managers, and want to circumvent their system (i.e. no repairs, and shoddy repairs when required) to install a bathroom fan that will manage the moisture in our small bathroom 7'3" (W) x 5'(D) x 7'10 (H). The existing fan does not do the trick, and black mould in the bathroom is the result. There is a healthy layer of dust behind the vent, and just beyond the fan, as well.
I would ideally like to pick up something with low sones that can handle this bathroom size. I know there are models that can gauge humidity within the bathroom and auto-operate when necessary, and would be interested to know if that is a possibility as well. A quote for installation with and without the humidity gauge ability would be appreciated.
If it helps, the current fan opening is 10" x 10".
About: This requirement is in on one of our investment properties, & we're (very) price-sensitive real-estate investors looking for the right fit of qualified electrician to whom we can entrust more work in the future.
We've tried to provide as much info as possible upfront to be respectful of everyone's time, and because we're ready to get this done now.
Ideally, you are:
(a) a conscientious professional who works with integrity
(b) someone who says what (s)he does & does what (s)he says;
(c) a professional with excellent references,
(d) ACP compliant, and
(e) able to get this started, get finished now.
If so, this may be a good fit, and the beginning of a working relationship.
Let's respect everyone's time & only submit serious bids, ie. itemised, detailed bids with time & material expenses for this assignment.
Walk-throughs can be organised over the weekend on Saturday (noon) & Sunday (3 pm)
After your walkthru', we look to you to propose your lowest quote to supply material and perform labour necessary to rewire the following in a two-level unit:
(1) Main level:
a) bedroom: 3 - receptacles, 1 -- light, 1 -- switch
b) sitting room: 3 -- receptacles, 1 -- light, 1 -- switch
c) hall entrance and landing: 1 -- receptacle, 1 -- wall light, 1 -- 3-way switch system, 1 -- interconnected smoke / Carbon Monoxide detectors
(2) Second floor:
a) hall: 1 -- light, 1 -- switch, 1 -- interconnected Smoke/Carbon Monoxide detector
b) kitchen: 1 -- 2GANG GFCI receptacle for above counter top, 1 -- 240V receptacle for stove, 1 -- receptacle for fridge, 1 -- receptacle for above counter top, 1 -- light, 1 -- switch
c) bathroom: 1 -- GFCI type receptacle, 1 -- light, 1 -- switch, 1 -- 90 CFM fan and venting to outside
d) den: 1 -- receptacle, 1 -- light, 1 -- switchbedroom # 1: 3 -- receptacles, 1 -- light, 1 -- switch
e) bedroom # 2: 3 -- receptacles, 1 -- light, 1 -- switch
f) balcony: 1 -- GFCI type receptacle with weatherproof cover, 1 --light, 1 -- switch
(3) Install panel on 2nd floor hall above forced air heater.
(4) Install separate circuits for unit A (stove, dryer and bathroom)
(5) Obtain electrical permit and all inspections as necessary from ESA; provide copy of certificate once obtained
(6) Plastering of all holes made during rewire
(7) All labour and material for wiring provided by you are to be fully guaranteed for three years
(8) Installations to be completed in a professional manner with minimal damage to property, using the least intrusive wiring method and in strict accordance to all pertinent ESA rules and regulations
(9) Payment Terms - 20% to start, 30% at midpoint, 50% at completion
Sincerely, Anand M. - Project Mgr.
Looking for a handyman who can built and install the following :
Carpentry - Need to have three simple wooden frames built (specific measurements) and have them installed from floor to ceiling to serve as room dividers ( look like sohji screens ).
Electrical - Need to wire and install two wall sconces and also extend current wiring/cabe to a different wall location.
Price and quality are important.
Just bought a 60 yr. old semi-detached, backsplit home.
Carpets need to be removed from Great room (dining room/living room), 2 staircases (6-7 steps each), 2 small hallways and 2 bedrooms (approx. 1200 sq. ft. total)
Depending on condition of floor once carpets are removed we may need to completely overhall the floors or just polish them. Original owners in home have always had carpet. Two rooms have already had the carpets removed previously and floor condition was great in those rooms, but we can not assume the same for the rest of the house.
Both bathrooms also currently do not have any electrical outlets. We would like one for each of the bathrooms.
Ideally the timeframe for these projets would be 2 weeks, starting February 14th 2012 and finishing before the end of the month.
The work is on the second floor. Previously we have experienced roof leaks which have caused portion of the ceiling (see pics) to cause damage to the ceiling. We believe that due to the water leak electrical elements such as the lights and other electrical fixtures in the kitchen have faltered. We require a handy man to visit the site and provide a proposal to make repairs to the ceiling and to the damaged electrical elements of the unit. The roof leak has since been repaired.
We are an organization with 15 sites throughout the Toronto area including Brampton, Mississauga, Vaughan and Markham. Although we have an immediate requirements to make the necessary repairs to the current condition as noted above we are also looking to find a company that can assist us with a number of small to medium size projects that would include plumbing, electrical and other €œhandy man€ related repairs. Perhaps this would be an opportunity to begin a long term relationship with a company that can deliver such services.
I need a Certificated Electrician for instal a hot tub out side in my desk need to make a base for the hot tub I am no sure if the desk can carrie the wheigt of the tub
the tub is 324 galons water and can be used for 6 people so the base under the desk shuld be n hard plse contact me if you are interesting in thist proyec and sumit an estimate
thank you Maria
Our condo already has a 3/8" natural gas quick connect supply outlet installed. The issue arises in that the hose on our BBQ has a 1/2" quick connect, so we need the size of the natural gas supply changed to accommodate our BBQ. Please provide an estimate for the cost to complete the change described.
Estimate for an electricity service mast to be added to my single story.
Home to raise my hydro supply line. Looking for a company who have done these before and reliable start and finish times.
May I have an estimate which was detailed enough to help me understand the resulting costs.
2700 sqft. demolition already completed and walls painted - need clean up of circuit breaker, removal of existing power cables, installation of 200 ft of track lighting with 15 power boxes, 2 additional light fixtures, 3 video power connectors, 33 halogen light fixtures, power to door bell and 2 security keypads, 2 kitchen outlets, 11 room outlets, several light switches.
looking for online estimates at this time. thanks.
Looking for a certified electrician for a small project, to safely wire a small circuit consisting of 3 computer fans, an electrical transformer, an on-off switch, and a potentiometer (low-high) for cooling computers that I have on a wooden shelf I've built. I've seen these little plastic boxes with something like a breadboard inside, but I just wouldn't trust myself with a soldering iron, and thinking maybe somebody (in Toronto ON) could lend their expertise so I could just plug the thing in with no worries.
Just bought a natural gas BBQ.
I have the gas access outside and the hose to connect it to the BBQ.
I believe all I need is the quick connection installed to be able to connect the BBQ hose to the gas line.
Looking for a licensed gas fitter to do this work.
I will attach a picture if possible otherwise please contact me via email and I can send you a pic.
Looking to have this done this week (prior to Saturday, April 7th.)
Installation of phase converter from single phase to three phase. I have new converter to be installed. Need the converter to be installed and wired in then the line to the new equipment location. Info of equipment is attached. It is a vf608 requiring the 3 phase power. The run from the panel to the equipment is about 100 ft. Going up one floor to processing room. Requiring overhead installation of final wire and twist plug. Most info is in attached document. I have converter and panel and full manual. Looking to hire asap and need installation asap also. The business is located in toronto. Be ready to visit for accurate estimate. I may be reached at my business number during the day or my cell after hours. Please leave message i will return call if missed.
I'd like to remodel my basement to a two bedroom place. I have most of the work lined up already, so heat, drywall, paint, plumbing is taken care of. I am still searching for an electrician to help me out.
The details are
- install 6 pot lights
- install 2 normal lights
- remove electrical heaters
- install 2 high power plugs for kitchen appliances
- install 7 normal wall plugs in the remodelled area.
- install 6 light switches
The job is for the month of December 2012 and I'd be happy if you had time to help us out.
Approximate location Eglinton West / Allen Road
Need to install 1 ceiling fan and 5 lights (all out doors) as well as a triple rocker switch (most supplies will be provided, anything else that is needed I will be more than happy to supply).
Would also like a quote on how much it would be to change one of my breakers to a higher electric capacity voltage as the power goes off on one of my breakers if i have the microwave and electric kettle on at the same time.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started