Looking for a handyman who can built and install the following :
Carpentry - Need to have three simple wooden frames built (specific measurements) and have them installed from floor to ceiling to serve as room dividers ( look like sohji screens ).
Electrical - Need to wire and install two wall sconces and also extend current wiring/cabe to a different wall location.
Price and quality are important.
Thank you
Just bought a 60 yr. old semi-detached, backsplit home.
Carpets need to be removed from Great room (dining room/living room), 2 staircases (6-7 steps each), 2 small hallways and 2 bedrooms (approx. 1200 sq. ft. total)
Depending on condition of floor once carpets are removed we may need to completely overhall the floors or just polish them. Original owners in home have always had carpet. Two rooms have already had the carpets removed previously and floor condition was great in those rooms, but we can not assume the same for the rest of the house.
Both bathrooms also currently do not have any electrical outlets. We would like one for each of the bathrooms.
Ideally the timeframe for these projets would be 2 weeks, starting February 14th 2012 and finishing before the end of the month.
The work is on the second floor. Previously we have experienced roof leaks which have caused portion of the ceiling (see pics) to cause damage to the ceiling. We believe that due to the water leak electrical elements such as the lights and other electrical fixtures in the kitchen have faltered. We require a handy man to visit the site and provide a proposal to make repairs to the ceiling and to the damaged electrical elements of the unit. The roof leak has since been repaired.
We are an organization with 15 sites throughout the Toronto area including Brampton, Mississauga, Vaughan and Markham. Although we have an immediate requirements to make the necessary repairs to the current condition as noted above we are also looking to find a company that can assist us with a number of small to medium size projects that would include plumbing, electrical and other €œhandy man€ related repairs. Perhaps this would be an opportunity to begin a long term relationship with a company that can deliver such services.
We had a ceiling fan installed a few years ago, but it's never worked. I'd like to have someone come over and tell us if it's an issue with the electrical (it's apparently connected to one of our light switches) or an issue with the fan. Unfortunately the person who installed it didn't test it before they left? It's on a very high vaulted ceiling
I need a Certificated Electrician for instal a hot tub out side in my desk need to make a base for the hot tub I am no sure if the desk can carrie the wheigt of the tub
the tub is 324 galons water and can be used for 6 people so the base under the desk shuld be n hard plse contact me if you are interesting in thist proyec and sumit an estimate
thank you Maria
Our condo already has a 3/8" natural gas quick connect supply outlet installed. The issue arises in that the hose on our BBQ has a 1/2" quick connect, so we need the size of the natural gas supply changed to accommodate our BBQ. Please provide an estimate for the cost to complete the change described.
Hi,
The circuit breaker controlling our powder room has gone to center position last night. I have tried resetting it but it goes back to center position. Assuming this is a quick fix since it was all working until last night and stopped working this morning.
Please contact me if you can fix this with an estimate.
Thank you for reading.
Best,
Rohit.
Estimate for an electricity service mast to be added to my single story.
Home to raise my hydro supply line. Looking for a company who have done these before and reliable start and finish times.
May I have an estimate which was detailed enough to help me understand the resulting costs.
Milan
2700 sqft. demolition already completed and walls painted - need clean up of circuit breaker, removal of existing power cables, installation of 200 ft of track lighting with 15 power boxes, 2 additional light fixtures, 3 video power connectors, 33 halogen light fixtures, power to door bell and 2 security keypads, 2 kitchen outlets, 11 room outlets, several light switches.
looking for online estimates at this time. thanks.
Looking for a certified electrician for a small project, to safely wire a small circuit consisting of 3 computer fans, an electrical transformer, an on-off switch, and a potentiometer (low-high) for cooling computers that I have on a wooden shelf I've built. I've seen these little plastic boxes with something like a breadboard inside, but I just wouldn't trust myself with a soldering iron, and thinking maybe somebody (in Toronto ON) could lend their expertise so I could just plug the thing in with no worries.
Thanks!
1. to install kitchen range hood, remove over-stove microwave, remove existing fan in ceiling, connect hood to existing ducting in ceiling, patch and refinish ceiling and wall.
2. replace two bathroom vent fans with new higher capacity fans with back flow prevention and variable speed control.
I will supply, and have in hand, the two bathroom fans, and the kitchen range hood. Contractor will need to supply backflow prevention and variable speed control.
Special requirements: Because of a health condition with severe sensitivity to construction dust, dust control steps will be needed, including draping plastic sheeting over cupboards and over kitchen openings and bathroom doorways. As-you-go cleanup and suppression of dust.
Just bought a natural gas BBQ.
I have the gas access outside and the hose to connect it to the BBQ.
I believe all I need is the quick connection installed to be able to connect the BBQ hose to the gas line.
Looking for a licensed gas fitter to do this work.
I will attach a picture if possible otherwise please contact me via email and I can send you a pic.
Looking to have this done this week (prior to Saturday, April 7th.)
Installation of phase converter from single phase to three phase. I have new converter to be installed. Need the converter to be installed and wired in then the line to the new equipment location. Info of equipment is attached. It is a vf608 requiring the 3 phase power. The run from the panel to the equipment is about 100 ft. Going up one floor to processing room. Requiring overhead installation of final wire and twist plug. Most info is in attached document. I have converter and panel and full manual. Looking to hire asap and need installation asap also. The business is located in toronto. Be ready to visit for accurate estimate. I may be reached at my business number during the day or my cell after hours. Please leave message i will return call if missed.
I am a tenant in a second floor apartment in an older house in Toronto. I have an audio system and am getting interference/dc hum that is being introduced by various dimmers, ceiling fans, appliances etc.
I would like to have an electrician with experience doing audio instals, trouble shooting sensitive equipment etc. have a look and provide me (and the homeowner who is the downstairs neighbour) with a quote on a solution.
If it's determined a dedicated AC line to the box would eliminate the issue I would like to run 10-12 gauge Romex and install a new hospital grade AC receptacle.
Hello there,
I'd like to remodel my basement to a two bedroom place. I have most of the work lined up already, so heat, drywall, paint, plumbing is taken care of. I am still searching for an electrician to help me out.
The details are
- install 6 pot lights
- install 2 normal lights
- remove electrical heaters
- install 2 high power plugs for kitchen appliances
- install 7 normal wall plugs in the remodelled area.
- install 6 light switches
The job is for the month of December 2012 and I'd be happy if you had time to help us out.
Approximate location Eglinton West / Allen Road
Need to install 1 ceiling fan and 5 lights (all out doors) as well as a triple rocker switch (most supplies will be provided, anything else that is needed I will be more than happy to supply).
Would also like a quote on how much it would be to change one of my breakers to a higher electric capacity voltage as the power goes off on one of my breakers if i have the microwave and electric kettle on at the same time.
ESA rough out complete to the entire home in 2017, pandemic put a hold on completion and now requires completion and now want to add an upgrade to the existing 100amp breaker panel plus pony to a 200amp.
2nd floor and main floor completed and basement rough out completed but need to open and close ESA asap.
I recently buy a townhouse in North York. It is in need of a lot of upgrade. I need a handy man who can give me an estimate on fixing the following around the house. It's about 1000 sq ft and two story townhouse.
- electric rewiring around the house including upgrading the fuse box to use the latest appliances
- central air hook up or find the solution to send heat or air conditioning through out the house
- plumbing repair
- water heater upgrade
Thanks,
Stewart
House in Toronto, need trouble-shooting.
There is one breaker that keeps tripping in my house.
1. It can trip with nothing plugged in.
2. After reset, it sometimes trips again within 10 minutes, sometimes can go on more than 1 days without problem.
3. It always trips when another circuit uses a lot of power, but that other circuit itself does lose power.
Please contact me by this email or call me.
Cheers,
Looking for a Licensed and insured Electrician. We will need a detailed itemized quote. if you are interested in the project we can schedule a site visit.
Scope of work:
- looking for someone to finish some rough ins and finishing.
1. Exterior
- garage lights and plug
- garage door connection done to code
- exterior light behind garage
- recess exterior outlets into brick wall
- create switch for outdoor light
2. Interior
- re-sequence 8 switch
- three way switch
- install shower pot light
- connect fan
- add switch
- 1 outlet
- Connect all smoke detectors to sequence
3. Low voltage/Security Camera
- crimp 8 exterior camera system
- two speakers not running properly
4. Bring panel to code including labeling/staple wires/connect
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.
Click here to get started