Ever wonder what you're neighbours are doing to improve their homes? Discover what other Toronto homeowners have planned for their Framing projects by reading the details of their request for quotes below.
In total, TrustedPros has received 157 Framing projects posted by homeowners in Toronto seeking the services of local Framing Contractors. Total estimated value of these projects is $5,639,500.00 with a per project average of $35,920.00.
|City||#Projects||Total Value||Avg Budget|
The house is 100 yrs old solid brick. We wish to change the main floor to an open concept and the engineer has recommended supporting the floor above using a 14 ft beam supported by two 16 ft beams spanning the width of the house. (see attached .pdf document). I require demolition of the two existing walls and installation of the beams. I will do all the finish work myself i.e. framing, drywall, painting etc. One wall is a party wall and is also solid brick. I can email the .pdf document (I had to mangle it a bit to change it into a .JPG for this posting.
We're currently looking for trades for 2 upcoming projects, a rear addition and a two car garage.
Generally looking for:
- Demolition Crews
WSIB & Liability Insurance is a must, if you're interested respond to this ad and i can send a set of drawings for each project.
We are a design build firm with multiple design projects in progress. We generate a high volume of leads, designs, and builds. We are looking for qualified trades and builders to work with on our upcoming projects. Our projects typically range from a $50,000 renovation up to million dollar custom homes. We design and work on high end projects in the GTA, if you can provide quality workmanship in a timely manner please reach out to us, we would love to meet you and discuss further. We are looking to build long term working relationships with quality builders.
Location: East of the Lower Beaches Area.
Permits have been issued for demolition of current home (Bungalow) and the new construction of 2 identical homes. Requesting quotes for the following services:
- Demolition and Excavation for 2 Lots (10 Ft Deep)
- Foundation (Concrete Poured)
- Brick Layer
Drawings attached, send me an email with introduction, current/past property projects, and approximate estimate to complete the work as availability schedule.
I have a new residential construction in North York, building permit should be issued in one or two weeks, now I am looking for pricing of Demolition, excavation, foundation, garage & basement slab. If you are interest in the project, please email response. I will send the drawing to you.
House has been completely gutted. Floor joist and subfloor remain (original).
1. Resheet subfloors
2. Replace/sister several damaged floor joists 2'x10'x16'
3. Frame all walls & door openings on each floor (4 floors : 900 sq. ft. per floor)
4. Widen staircase
Note: All materials provided by the owner.
2 story town house and it needs to be framed 5' out from the house the foundation is existing and a little framing work in side the house, ill have a balcony on the 2nd floor, and a walk out basment from the front of the house. i have the building permit also with thhe scetches for the walkout basment.
Framing Contract up For Tender. Start date OCT 15 2015.
We are looking for a highly experienced custom carpentry framing crew to put up a 3,000 sf home. I am not looking for subdivision production framers or reno contractors. Only experienced custom house framers. Wsib / form 1000 required. The project is located in North York, Dufferin and 401 area.
The contract would consist of complete rough framing of all floors, walls, roof, backframing boxes, ceiling drops, plus basement strapping. Engineered roof and floor system.
Framing contractor to provide nails, generator and compressor, tools and gas.
I will provide gaskets, hangers, glue, tyvek
The house is ready to start October 15th 2015. Serious inquiries only. Only experienced framing contractors that show up and get the job done.
Plans are available upon request.
Please respond with square foot cost of work.
Form footings for a new house in Etobicoke area. Footings to be 26" x 8". Wood will be supplied, need labour only with own tools, generator, and nails. Project is ready to be formed on Tuesday, August 10, 2010. Several other forming projects on this house will be required as well, with several other projects in GTA requiring forming for footings, verandas, retaining walls, etc. Please email your availabilitty as well as copy of WSIB and insurance certificate. 3 References are required as well.
Project scheduled to start in September. Requires a slab on grade foundation, supporting a rear to-story addition.
This project is for excavation, foundation (will have electric radiant flooring), framing and all cladding.
Contact for details. Experience with slab on grade foundation systems a must.
To give me a hand making level floor joists in 15 by 24ft gutted space. It is out of level about 4.5 inches running perpendicular to joists over the 24ft.Some sistering, some joists with shim strips on top and some trimed down. The joists are real 2by 12sx16' span,12" on center and also supported in middle with steel beam. The sill plate has deteriorated in one area under 6 joists and extends 5ft beyond the gut. The water run off from roof that caused rot has been fixed. That area can be stabilized with a interior supporting wall next to foundation. My building footings extend a foot in width beyond the foundation wall at floor so the supporting wall can be built on top.
Hi, my property is a 1940`s 2storey semi in central east toronto. It had a laundry mat on main floor store front. The store front is completly gutted and is to be made into a self contained loft style student or single proffessional rental in long term but to be used by my sons as a seperate living unit for near future. The space has dedicated street front entrance and seperate basement entrance. Laundry and use of 7.5 ft basement area will be built at later phase. The floor joists to be leveled and some structural issues to be done has dimensions of 16ft.wide, 28ft long and 10.5 high. Also 2 the cieling joists are sagging due to a cut out where heating ducts were. I am heated by water and the piping is presently dismantled to 2nd floor in order for me to strip the ceiling. The loft living space will have a Kitchenette (already bought), Aprox 6x6 .3 piece washroom, and a entrance closet. The rest of space is open. Adjacent to washroom is sleepng zone at rear, center of space is dining zone and in front is lounge zone.
The sinking area was due to a water problem that has been fixed. The sill plate has wrotted. Problem area spans around 10 feet. Jack posts needed. I have two steel beams 11.5 feet long that are sandwiched with wood and bolted. I need posts for instalation in problem area. I have 220v for welder. I want to install a permanent support structure by jack posting and lifting a small amount. Also to bolt floor joists to wall studs. I will be sistering to make level after. I will have the area clear and exposed dry wall off, Pipes out, gas pipe? water off, gas off, so that you can install the support system.
We are planning to build an addition on top of our semidetached two-story house. The project has been designed by an architect and approved by the city. We are looking for contracting the demolition of the existing roof and build up the addition's frame including the stairs connecting it second floor and roof. The inside work will be done separately.
We have two jobs we are starting immediately, so need framers to do one or both if you have enough on your crew.
Both in Toronto.
Truck, tools and equipment necessary.
Call if you wish an interview.
Must be able to read blue prints and have the necessary experience to undertake these jobs in a timely manner.
Possibility for full time work if these contracts are successfully completed on a variety of our projects.
Framing quote needed
Location: Weston Rd & Blackcreek
Turning a bungalow into a 3 storey house
Phase 1. Interior framing needed for basement and mainfloor
Phase 2. Frame 2nd and 3rd floor and roof according to architectural stamped drawings.
Phase 1. basement and mainfloor will be ready for framing in about 3 weeks. Basement is currently being underpinned.
Phase 2. The rest of the framing will be needed when we get the building permit in about 2-3 months.
Please provide your best quote for each floor and how much time you will need to finish it.
Payment will be made by E-transfer or personal cheque
10% after first day of work
40% after basement framing is done and passed inspection
40% after mainfloor framing is done and passed inspection
What we expect:
1. Firm adherenece to the established project timeline. A daily penalty will be imposed if the project goes over the agreed upon completion deadline.(We will try our best to be fair but we also need to protect ourselves from project being overdue.)
2. 10% holdback upon project completion.
3. Valid WSIB and commercial liability insurance. These will be asked for during the interview and only those contractors that are properly insured will be considered further.
4. Red seal certification preferred or framers with minimal 5 year varifiable full time experience.
5. Allow us to drop by on a regular basis to see how the work is progressing and buy you and your crew coffee and donuts. :)
Open concept house in the north-west area of eglinton and victoria park, must start immediate and complete before end of month. Easy modern open concept, floor is already done, but needs to be secured and levelled, then flat roof, lvls, and tji's and 1 steel beam. Contact with references and will send you address.
Our company is expanding and as a result we are looking for QUALIFIED trades to quote the various projects we have. We do both Residential and Commercial work and need trades in every aspect of work.
What we need from you:
To be a specialist in your trade, if you’re a drywall company great; please don’t tell us your speciality is also siding….
Your papers need to be on file with our office:
• Business License
• GST #
• TRADE License (if Applicable)
• Falls Certificate (if Applicable)
• Insurance Certificate
• Union Papers (Commercial If Applicable)
Also, as well please send us any references you may have. We require at least 5 that we can contact.
Rough Framing price
We are looking for a framing price, labour only as follows;
forming the footings
Installation of windows and doors
Installing draft stop around window openings
Installing house wrap
Installing backup as required
drilling and installing expanding anchors into solid masonry wall as required for ledgers for floor and roof
Job will be ready to start, form footings, next week.
I can supply drawings to interested parties
Any questions, please call at number below.
Need a framing crew for infill house in the Bloor Royal York area of Toronto, predominately new construction including roof. Approximately 3,000 sq' house, ie; foot- print is 55' x 26' by 2 floors. Commencing first week if August.
Please provide an estimated price, ie; by the sq', or overall cost etc.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started