Ever wonder what you're neighbours are doing to improve their homes? Discover what other Toronto homeowners have planned for their Roofing projects by reading the details of their request for quotes below.
In total, TrustedPros has received 336 Roofing projects posted by homeowners in Toronto seeking the services of local Roofing Contractors. Total estimated value of these projects is $7,633,500.00 with a per project average of $22,718.00.
If you're in need of a contractor for your Roofing project, use our job posting tool to get matched to local pros or browse our directory of Roofing Contractors in Toronto .
City | #Projects | Total Value | Avg Budget |
Mississauga | 193 | $2,550,000.00 | $13,212.00 |
Brampton | 162 | $3,294,500.00 | $20,336.00 |
Scarborough | 73 | $1,858,000.00 | $25,452.00 |
Richmond Hill | 40 | $327,000.00 | $8,175.00 |
North York | 33 | $760,000.00 | $23,030.00 |
Oakville | 60 | $375,000.00 | $6,250.00 |
Etobicoke | 33 | $265,500.00 | $8,045.00 |
Maple | 20 | $136,500.00 | $6,825.00 |
Markham | 26 | $154,000.00 | $5,923.00 |
Toronto | 336 | $7,633,500.00 | $22,718.00 |
Hello,
I would like to install exhaust fans in two bathrooms in my house. One is on the first floor and would exhaust through the roof, the other is on the second floor and would likely need to exaust through a brick wall. I would like to do this ASAP. Please contact me for more info.
thanks!
Hello:
We have a 100 year old, two-storey home in the Pape and Danforth area of Toronto. It is rectangular in plan, measuring approximately 14' x 41' and has a flat roof of 574 sq. ft.. Note that the original house was approximately 14' x 26' and a 14' x 15' addition was put on about 13 years ago. However, the roof was not rebuilt at that time and as such there is an approximately 8" "step" between the two roof levels with the slopes draining towards the centre with NOWHERE for the water to to go!
The roof currently leaks at this juncture and we need to redo it. We have two choices 1) rebuild the flat roof so it is on one plane, with the correct slope or 2) build a peaked roof. We are leaning toward a sloped roof as this would give us some, albeit not a huge amount, of much needed attic space.
We are particularly intrigued by EPDM membranes for the flat roof OR utilizing Structural Insulation Panels (SIPS) for a peaked roof. Anyone experienced with these systems would be of particular interest. However, contractors using more conventional building systems will also be considered.
Of course we recognize that firm quotes cannot be given online, however, ballpark estimates, similar project information, photos, websites, etc. would be far more appreciated than just "call me at XXXXXX to discuss".
If the quality, price, and person is right, we are ready to go quickly with this but are more than willing to wait for the right builder.
Thank you very much.
Looking for a roofing company that specializes in new construction Roofing and aluminum. We would like to get a quotation for a new custom home in Toronto.
drawings attached
-Please give us 4 upgrade options:
1) standard shingles
2) Ice and water shield or comparable liner throughout the entire deck
3) cedar shingles
4) imitation Slate (look a like)
Doing some renovations on my house on the interior side and I discovered a little leak in last couple of days that dripped through the roof onto the ceiling drywall. I am looking for someone with a good roofing repair track record to fix it and give me an assessment as to the rest of the roof. Thanks
Looking for:
- eavestrough cleaning
- minor fixes for roof (if needed)
- inspect the chimney on the roof and adjust or install a new screen to prevent birds from nesting.
This is a residential house, two-storey building South Etobicoke.
Only contractors with high positive feedback are considered.
I require a quote.
2000 square feet, 3bedroom 2 baths, modern 1 kitchen and laundry room in basement with rough in for bath and kitchen in basement. THis would include electrical wiring throughout the house top to bottom, heating and forced air, new furnace and plumbing throughout the house for designated outfitting one central bath upstairs and one powder room downstairs on main floor.
2nd floor consists of a landing with 2 windows, and a bedroom with one window and skylight. There is leaking from roof above a window in landing, and in the bedroom at low point of the roof. Landing roof is slanted on one side, bedroom is slanted on either side (peak in middle is roughly 6 feet). House is ~100 years old.
We would like to raise the roof to standard height (so rooms no longer have slanting) and have the roof redone. Locations of the windows in the landing will change to opposite walls. Depending on total cost the framing for the walls may only be done, insulation and drywall for roof to be done though.
Also the possibility of an extension to the 2nd floor over the kitchen (connecting the landing) - depending on cost.
This is an urgent request due to the roof issues, so ideally work should be started within 1 week or so.
Gable wall for bungalow near Main/Danforth
Scope of work:
- Remove existing loose asphalt shingles
- Replace with fibreglass (architectural shingles - dark colour)
- Cover existing wood trim with new metal soffits and fascia to match the front (peak brand - home depot)
Note: Contractor will need to have insurance to cover workplace safety.
Please see attached PDF with pics.
I have two missing pieces of fascia due to strong wind we had.
It’s a two floors house. Colour of fascia is Dover grey , I’ve been told.
Look at the pictures for details please.
I have a ladder with protection for the stucco wall, I prefer you use it.
Need an estimate from someone who can do that.
Thanks!
A small repair job between two semi-detached houses. The back and the flashing on my side needs replacing/repair.
My house is on the left.
The work is about 30 feet above the ground. There are NO power lines to worry about, the photo was taken from across the street with a telephoto lens.
All workers must be appropriately trained to work at heights.
I currently have a 2100sqft flat roof that is 22 years old and is of the tar and gravel type. I would like someone come in and remove all the gravel and tar and get it down to the plywood and then install two layers corss sheeted of the melted down flat roofing material. There are currently six skylights and maybe four drains that need to be worked around. Witht the warm weather here and the lack of snow I`m ready to hire and begin theis project ASAP. I`m lookoing for preliminary quotes and I will narrow down to three contractors to come and do site visits. The contractor must be respoinsible for all material and removal of debris including existing gravel and tar.
I currently live in a house that is 30years old with a flat roof done the old way with tar and gtravel. I would like to have all the tar and gravel removed and have the new torch down roofing down. It is approximately 2100 sqft of roof and there are 4 skylights that you need to work around. Please provide ball park quote via email to determine the three contractors who will have a site vist to bid on the job
Need an estimate for Toronto area to replace a modified bitumen flat roof of 1020sqft that has ponding but no leak issues (yet) and add a skylight, with access to roof. Looking to fix the slope with insulation.
Also, cost to cut and Add an extra downpipe?
Also i was wondering if it is possible to make it a rooftop green deck, and price. Are there special permits required?
We had an addition built in 2006. The decorative trim was falling off the side and on closer inspection we have found that there has been extensive water damage caused by a leak in the back corner of the flat membrane roof near or involving the downspout. We now have carpenter ants and worry about the structural integrity of what may be affected by the leak, in particular the load-bearing beams in that back right corner. We have tacked up vapor barrier as a temporary water-stop but need someone to come out and assess the damage as soon as possible with the intention of fixing the structure and repairing the roof while saving as much as possible of the existing decorative moldings and windows.
Please call Tony or Ricki ASAP.
Thanks
Hello all,
Looking at getting bids on a flat roof for a free standing garage. The size of the roof is approx. 20'2" x 17'8". I have the plans on PDF and can send them. If interested please contact me. Also need soffit supply and installed. This project will be starting in about 3 weeks, perhaps sooner depending on my other projects so if your bidding just keep in mind the approx start date.
Thanks.
John
We have a current project coming up that we require a roofing contractor for. The correct company will be able to provide standard quality of work, Insurance and WSIB coverage as well as a professional detailed work quote.
Repair flat roof on North side of building (storage room)
Remove existing flat roof membrane and metal perimeter coping (wrong metal)
Supply and install 2 mill rubber membrane running East and West overlap 6''
Supply and install new metal drip edge (comm. brown) around perimeter
Supply and install 4 mill rubber membrane running North and South overlap 6''
Replace wall flashing where needed and caulk siding as needed
Replace any rotting chip wood
Tapcon metal flashing running from lower roof to upper roof and re-caulk
Please contact with availability and quote for project.
Looking to have the single-storey flat roof over our kitchen replaced. It's leaking and in poor condition. Measure 11' x 12' approx.
We would like to have the old layers taken off, add insulation, increase the pitch slightly to help with positive drainage (could be done by either building up the deck or with tapered insulation).
It would also be great to add a vent for our stove exhaust at the same time.
Looking to have this work completed within the next few weeks. Ideal price range is under $3000. Minimum 10 year warranty.
I need an estimate for a flat roof shingle installation:
Approximately 16 x 26 ft
- remove existing flashing
- strip 2 layers existing shingles
- 1 ply protectoboard
- 1 ply base membrane with flashings
- 1 ply granulted cap membrane
- new pre-painted metal flashing to chimney with ice and water underlay
- 1 bathroom plumbing stack flashing
- cleanup job site
Please indicate brand(s) to be used for quote: Certanteed etc. If different options available, please provide quote for each.
Thank you.
I need a flat roof installed over a new addition. The roof is 325 sq/ft over a basement addition. The roof is at ground level. There will be a deck over the roof. The roof has been framed and sheathed in 3/4" T&G. I've attached a picture of the job. The roofer I had lined up to do the job canceled on me last minute so I need this done ASAP ie. this week.
We are planning to build an addition on top of our semidetached two-story house. The project has been designed by an architect and approved by the city. We are looking for contracting the demolition of the existing roof and build up the addition's frame including the stairs connecting it second floor and roof. The inside work will be done separately.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.
Click here to get started