Ever wonder what you're neighbours are doing to improve their homes? Discover what other Toronto homeowners have planned for their Windows and Doors projects by reading the details of their request for quotes below.
In total, TrustedPros has received 265 Windows and Doors projects posted by homeowners in Toronto seeking the services of local Windows and Doors Companies. Total estimated value of these projects is $2,838,000.00 with a per project average of $10,709.00.
|City||#Projects||Total Value||Avg Budget|
I need to construct 2 new noise-proof doors/frames:
1. Linked door from the master room to the adjacent bathroom (24''x80'' or 26''X80'')
2. Linked door from the garage to the home/passage area (30''X80")
1 new door (replacement only) to be installed in the garage, linked to the backyard.
I need quotes for:
1. Materials and labour
2. Labour only
I am looking to replace 1 second storey window with a new larger sized window which I will provide. So a new opening will have to be cut.
I am also looking to replace a second storey bathroom window which I will provide.
I need to cut a basement window on the side of the house and have a new wind put in which I will provide.
For all 3 windows I will provide the windows, I am looking to someone to do the labour.
Please call or email estimates on the cost of the job.
Looking to have work done in next 1-2 weeks.
I am looking for someone to widen exterior basement door frame by 3" (in wooden casing) and build and replace door, similar to old one if possible including lock. May be able to use lock from current door. Existing door is 63" high x 25" wide. This is a utility door so neither door nor frame needs to be of high quality. Would like work completed before winter sets in.
Exterior basement door needs to be replaced.
1. Remove old door
2. Steel door (homedepot half moon type)
3. Wooden casing, brick moulding
4. Replace old for new "basic" storm door
5. New dead lock and handle hardware
6. Calking as needed
Complete installation to get to as good to go product point.
I'm looking for someone to replace one basement window.
I would be interested to know if you have specialty products such as frosted glass, security bars integrated into the window and plexiglass panes or otherwise exceptionally durable panes (the chances of a basketball or other spherical projectile meeting glass in this location is high).
Rough opening is 40" x 27 1/4 " (minimal height of slight arch opening).
I am looking to have the work done before November 3 ideally, or before Nov. 11 at the latest.
I need to replace a standard bathroom door in a condo downtown Toronto. The frames and hardware are intact and can be reused, just the door suffered some water damage.
How much would it cost, considering labour and the door (plain white laminate)?
I can send pictures of the current door and measurements.
Project 1: bathroom
Remove old bathtub and replace it with a shower
I have extra tiles to be used in the area of the bathtub
Please quote me with a shower fawcet (model #, company) and shower door (model #, company etc) and a quotation without the above.
2 project: new window
I like to open a window in one of the bedrooms (measurements APX. w 60" x h 54")
Please inform me how long will take for the renovation and when you will be available.
Am looking for PRO who would take out and install a 46"x 65" ( Vinyl ) Bay window . Please NOTE : We doing exterior stucco and the job has been booked . We need these to be done ASAP so please provide approximate price for the window and the Time frame what you require from start to finish .
My situation is this, my bedroom door was broken. I bought a replacement from home depot but a measurement was off and the knob hole is ~ 1/2" - 5/8" lower than it should be. The frame is metal.
*** METAL ***
My question is do I need to order a new door or can my metal frame be adjusted to fit the lock mechanism? I would prefer to use the door I bought & perform the adjustment on the frame.
I need it done in the next couple of weeks, I'm putting the place up for lease so it needs to be clean!
I need a quote for a project. My project is for the basement that has 8 existing windows 48" wide and 32" above ground. I want to make those windows bigger by excavating under and cutting the wall up to 6' more. I want to install 8 fixed aluminum windows 48" x 84". Also I want to install a new window by cutting a new opening on the wall. This one I want 48" x 60". In addition to that 3 more windows (again new cut on the wall) on the ground 48" x 32". All windows are aluminum. Please quote with installation. The windows will be provided by us.
We are in need of doors for two closets (that are side by side).
The large closet is 61 inches wide and and 74 inches tall. The small closet is 29 inches wide and 74 inches tall.
The opening has not been framed.
We are located at Jane and Bloor in Toronto
Hello, I live in a condo around Sheppard and the DVP. The front hall closet and master bedroom closets are in desperate need of new doors. I would like to get a rough idea how much it would cost to instal the doors. I am just moving and $ is very tight.The new doors would be very simple. Can I get a free estimate
Moving into a new condo around June 20th. I need the single door entry to my bedroom enlarged and replaced with 2 french doors to allow for for more light to enter the living space. The wall is not load-bearing, but I will be adding brick veneer to the wall once the door has been installed. One electrical box needs to be moved when the door opening is being widened (I believe it is the light switch or a plug outlet). I will have the french doors and framing purchased from Home Depot. The condo is not yet registered as it is brand new, and given that it is a small job I suspect we would not need to rent the moving elevator. The unit is on the third floor. Hoping to have this done before June 30th when I will be fully moved in. I am supposed to get my keys June 19th and can provide pictures then.
Door 1: A pivoting (180 degrees), app. 7.5 feet x 4 feet wide door with 3 panes of frosted glass and stained maple frame with locking mechanism, shaker style with small bevel
Door 2: 3 horizontal panels of MDF, app. 7.5 feet high x 4.5 feet wide with small trim to hide seams, on a sliding track with locking mechanism and valance.
We'll need to see work samples and related experience
I have an opening from the living room to my office that needs to have a custom door installed as soon as possible.
81 5/8" High
42 1/4" Wide
with 35 1/4" of wall to the right of it. The other side of the door is the adjacent wall.
I would prefer a modern style of door (black with glass, stainless steel etc.) either sliding or french doors.
1) Custom sliding pocket door (3.5 feet x 7.5 feet app) - made from hollow core material with veneer and locking mechanism, hangs from track to be installed in ceiling. Pocket will need to be built as well, and baseboards will need to be replaced. Some electrical will need to be relocated or removed.
2) Regular flat panel door to be installed in bedroom - will require some drywalling and framing.
We are looking to have an opening for a window cut into our old brick on the side of the house for a bedroom. We have the drawings and permit. We'd like to get the work done before it gets cold but the sooner the better. We are at Yonge and Lawrence.
We'd like the opening and exterior trim to look similar to the existing windows to match. We can source the actual window and we have carpenters who can do the interior framing and interior trim.
The house is 101 years old and the brick is original.
Build backyard deck and add door where window is.
To cut an opening where the existing window is to create an entrance
To supply and install a new door - approx. size - 36€ x 80€
To supply all necessary materials and labour to build a new deck approx. 12 ft. long and 13 ft. wide using 2x8 pressure treated wood, 4x4 columns with cement base, regular decking boards
To supply all necessary materials and labour to build a 7 ft. high fence on the south side of the deck and stairs on the other side to gain access to the backyard and air conditioner
Looking to install 2 doors in 2 separate openings in my condo. Currently there are sliding doors installed.
I will need the following done:
1. Remove and dispose 2 sliding doors and tracks
2. Install 2 doors - framing, casing, and jams
3. Install bulk head in new door area
4. Touch up ceiling stucko where tracks used to be installed
5. Paint doors, trim, bulk head
I'd like the finished product to be a complete job.
Please provide an estimate for labour and materials.
The doors I'm looking for need to have frosted glass in the middle. I'm hoping for 2 80x30inch doors, however one opening might require a slightly smaller door (80x28inch).
I need to install a door and frame at the bottom of a narrow staircase in the basement. The width of the opening is approx 21" (I'm guessing a 18" or 20" door will be used). I'm not sure if a door can be installed on the stairs since the stairs surpass the wall OR if the wall needs to be extended slightly to be flush with the bottom of the stairs. Please have a look at the photos and contact me with suggestions and a quote. I can buy all the materials so please quote labour.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started