Ever wonder what you're neighbours are doing to improve their homes? Discover what other Barrie homeowners have planned for their Drywalling projects by reading the details of their request for quotes below.
In total, TrustedPros has received 26 Drywalling projects posted by homeowners in Barrie seeking the services of local Drywall Contractors. Total estimated value of these projects is $168,000.00 with a per project average of $6,461.00.
We had a water leak from our kitchen that has damaged the ceiling in our basement. We need the section of ceiling removed, then replace ceiling. Approximately 1 sheet of drywall. Also, several nail holes and cracks in drywall need repair and paint as well as window trim caulk and repaint. Not complicated, but we need work done quickly as the house is sold and we are moving in a couple weeks.
The job involves exterior walls and internal partition wall also the ceiling is a double layer of fireproof drywall. The mechanical room consisting of a furnace and hot water heater area. Will require fireproof drywall as well two layers on the inside and one on the outside. Taping and mudding of all seams, joints and bulkheads is required. All corners will be radiused edges.
We are looking for pricing for some drywall work for one of our Barrie properties currently under construction...
Need pricing for the following:
1) Install insulation and poly
2) Hang drywall (+ resilient channel) - no taping at this stage / drywall is on site
(Please quote separately)
Approx. 1400 sqft bungalow.
Looking to have the work done by first week of January.
Please advise. Thank you.
**Must have current WSIB**
I have a small bedroom, maybe 12'x11', that has some fairly extensive drywall damage. There are approximately 3 large, approximately 2'x2' areas that have been roughly cut out (I was going to try and patch them myself, but abandoned this idea) and some other smaller areas of damage.
All measurements are in feet.
Living room is 20x15
Dining room is 12x12
Office is 9x10
Family room 15x11
Hallway approx 20 x9
I have scraped the ceiling. I do not want texture again, just flat. My dining room ceiling is in the worst shape. I suspect it needs to be skim coated but the rest are in relatively good condition (I assume some filling and sanding). I will also have some repairs to do in the kitchen.
I am in the process of finishing my basement. I need a good drywall tape and mud guy. Basement is 500 sq. ft and has 52 drywall boards. Bathroom, Living room, back room and closet. Ceiling is finished drywall and not stucco. I need the work to be started week of August 13th.
Project in Barrie scheduled to start mid-August. The house is off Duckworth Street by the hospital. The interior of the house has to be completed gutted and renovated. We are looking for skilled trades people for the following:
Drywall removal and installers
Flooring and tiling professionals
We are looking for reliable hard working individuals
Own transportation is required
Tools are an asset
Flat rate based on experience
Please give quote on the following project. All drywalls are hung, I need to have them taped and mudded ready for painting. 200 linear feet of walls with appoximately 1000 sft of ceiling for California knock down ceiling. Rounded bull nose installed. Very simple L shape room with a powder room in corner. No complicated corners. I also need drywalling the curved ceiling under my 9 step staircase. 2 weeks timeline.
We have purchased a home in Barrie and are thinking about renting out the basement rooms to students. The basement is already finished but we do not know if the windows need to be made larger. We would like to find out if the windows need to get replaced? We also have some other work that needs to be done in the house, ceiling (water damage) and other windows that need to be replaced due to condensation in-between the windows.
We live out town, but we will be there on Tuesday May 31st.
Will & Lisa.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started