Ever wonder what you're neighbours are doing to improve their homes? Discover what other Montreal homeowners have planned for their Handyman projects by reading the details of their request for quotes below.
In total, TrustedPros has received 39 Handyman projects posted by homeowners in Montreal seeking the services of local Handyman Services. Total estimated value of these projects is $102,500.00 with a per project average of $2,628.00.
Need help decluttering (& some dusting, cleaning). Need some help to pack items into boxes (for things I will be keeping & moving or storing) Also possibly need help to lift and move some boxes and possibly a few pieces of furniture. Some cleaning & minor renovations (eg. some painting may be necessary).
I had renovations done 3 years ago, and a bad job was done on the tiles in the kitchen and bathroom, they are all cracked and coming up. The tiles need to be removed, the sub-floor re-leveled and structured and then re-tiled. the tiles run in the kitchen and then the master bathroom, up the wall around the tub, they all need to be re-done. We also installed and glass cube window in the bathroom, but they never sealed it properly, I think it also needs to be re-done. I would like my hot-water tank changed to a 60 gallon, the bathroom sink changed to a better one, the backsplash finished in the kitchen, a heater installed in the back closet, and some brick closed up with holes to the outside. The back closet floor is also tile and all cracked and I would like that to be removed and re-done. All tiles will become heated floor. I can purchase all major materials. There are a few little jobs with this also, but that's the most of it. I'm looking for quotes and contracts, and am looking to have the work done anywhere before May 2008.
I need the following to be fixed,
Our washroom's lock is jammed. We have purchased an external lock (simple one from walmart) which looksclick here would as well need a similar lock installed for our bedroom. The kitchen racks need to be fixed and a lock needs to be installed too.
A frame has to be installed in our bedroom.
Please let me know your quote.
1. Exterior caulking of a few cracks
2. Exterior Kitchen ventilation fan replacement
3. Exterior and 2 kitchen electrical wall outlets changed to Outlets with Ground Fault Interrupters (GFCI)
4. Install extensions to base of downspouts to divert water away from the structure/foundation
5. Sealing of deck/etc
6. Any recommendation for patio issues?
7. Can we completely block and cover the back patio neighbor fence with awning fabric or bamboo fence or anything
8. Garage issues with caulking needed on floor, frame of garage door and some weather-stripping
9. Garage door to house needs a self closer
10. Install smoke detector 1st floor and Missing carbon monoxide detector
We currently have a kitchen cupboard cabinet with 5 adjustable shelves inside. It's not a very useful system as items tend to float to the back and become unreachable and hard to see. We would like to have drawers installed as a solution to this problem.
The space is 15"W x 51"H x 21"D. I figure about five 10" high boxes could fit in there on metal drawer slides.
i currently have a gas stove that cannot be used due to regulations requiring a hood vent. I'm uncertain whether i want to put the duct through the ceilling or towards the side of the building. The hood range will most likely have to be of island type as the wall is made of brick and we want to cover that up with gyproc (in a future renovation) for energy conservation purporse
I am looking for someone to install wood on 2 staircases. The starircases are as follows:
Staircase 1: 3 angled steps + 11 regular steps
Staircase 2: 3 angled steps + 11 regular steps
I would like to use MDF for the risers and have them painted white. All materials including wood, MDF, angled steps have been purchased and will arrive on August 19th.
Please call if you have prior experience with such work.
I bought a Nest thermostat (nest.com) and tried to install it myself.
I have a Viconics thermostat and the controller module is a CBE118.
I have an heating system (all electrical) and a heat pump.
I'd like to know if it is possible to make my Nest work with this system. If not what do I need to change?
This is a semi detached cottage in ville Saint Laurent that needs renovation before putting it on sale. The house has been rented for many years and the kitchen counter needs to be replace. The vinyl floor of this small kitchen needs to be replaced with tiles.Also the floor of the living area needs to be sanded and polished.The interior of the whole house needs a paint job.
This needs to be completed by the end of August.
I need a handyman to help me finish some minor details of my home renovations. Tasks include:
Installing bifold doors
Installing two light fixtures in the kitchen (fishing the wires etc)
Fixing one of my electrical outlets (I did something wrong!)
Installing the floor moldings in my kitchen
Installing a tube from my AC unit to direct the water flow downstairs
1. My chimney was leaking over the winter/summer and there's some discolouration on the interior walls just below. It will probably need to be opened up and the wood and plaster will need to be repaired.
2. My bathroom sink is cracked and the whole piece of porcelain needs to be replaced and reinstalled.
3. The pipes that run into the kitchen are not properly insulated and the pipes froze last year. The wall will have to be opened up to see where they problem is exactly. This is a problem for all three floors of the triplex I live in.
4. Broken doorbell
I own 2 buildings. Small ones. Fourplexes. I don't have the time to o all that is required so I think a reliable, competent and friendly Hamdyman could help me out.
My budget is not very big but I'm obviously okay to pay fair money for good work done.
Drop me a line if interested. French speaking a definite plus.
Would be starting soon since i already have a few things to be done (minor dents like: patching holes in a sink, repaint a repaired wall, up to repair a exterior door window).
Thanks for reading!
I have a low hanging light / chandeleir that needs to be pulled closer to the ceiling. You will need pliers and plastic clips to pull closer to the ceiling. I also need bulbs changed in 2 recessed lights.
I need someone to come to my home between 1- 4pm on MONDAY, NOV 21ST or TUESDAY, NOV 22ND between 11am-3pm.
This is a 1-bedroom apartment in a building of 9 units in NDG built in 1950s. I have a new replacement door that needs to be cut to the right size and installed and painted. There are no hinges or door knobs on the new door yet. The damaged old door must be removed. This job needs to be done by Friday, Sep 28, 2012.
I require a handyman to install 2 new interior doors on pre-existing door frames. Installation will include new hinges and the pre-existing door knob. Doors will need to be supplied and delivered by handyman and must be pre-painted with primer and preferably door knob hole pre-cut.
I also require some plastering, sanding and priming for some spots in a small bathroom.
I need to replace my toilet seat, however the job is more difficult than expected. It is a Kohler toilet and the seat is screwed onto the toilet in a way that three people now have failed to be able to remove it. The screws cannot be unscrewed so it looks like it will require drilling down into the (very large) screws to remove them. It will require tools and equipment that are beyond a "home repair job" -- I need a professional! Please help.
I will have other larger renovation jobs in the near future, but need to start here. So this job will likely lead to more substantial work on several properties.
I have gone through the Reno Climat process and wish to hire someone to do the weather stripping and sealing for my home. A follow up step to winterizing will then be to clean and maintain my eavestroughs in November once the leaves are down from the trees. If you are certified to inspect and clean chimneys, please include estimate. AIR SEALING
Improve the air tightness of your house by 27 percent to achieve an
air change rate per hour of 10.43 at a pressure of 50 Pa.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started