Hi there, looking for red seal electrician to replace 10units of T-8 to LED panel lights. Please see the following link to the LED unit:click here also check the uploaded JPG for the ceiling layout.
Thanks in advance
I am accepting quotes for the supply, installation and termination of both electrical and data services in an existing retail location in Vancouver. Individual should be licensed in the City of Vancouver and have his/her BCSA (BC Safety Authority) card to obtain necessary electrical permit.
• Obtain electrical permit;
• Supply and install approximately 12 duplex electrical outlets;
• Supply and install approximately 7 duplex data outlets; and
• Terminate both electrical and data services in unit.
Please reply to indicate interest and a full Scope of Work will be provided to you at that time. Thank you in advance for your interest.
I have just purchased a condo unit (building is 22 yrs old, unit itself has been updated) and the building inspector has recommended a few fixes. Reno Work needing to be looked at/carried out:
1. Building Inspector said there needs to be some rewiring done regarding some lighting. Master Bedroom, Main room, and Second Bedroom all have some "custom lighting" set up on tracks or like spotlight stuff, and the inspector said that the tracks weren't mounted in a professional manner, and might need rewiring / remounting.
2. Kitchen cabinetry & under sink. There was water damage previously from a leaking garburator and as such the back (and perhaps bottom) of the cabinet needs replacing.
3. Kitchen sink: needs remounting maybe? Inspector says it's sitting on a 2by4 which is unprofessional and unreliable as a mount.
4. Look at repair/how to upkeep the floor fringe between hardwood flooring and shale flooring?
5. Looking at possibly replacing the carpeting with hardwood flooring?
6. Maybe couple other things here and there with regards to minor fixes/see if anything sticks out as needing to be reno'd
7. Couple questions about future changes to unit (changing cabinets/adding larger pantry)
I will not be in town Sept 13 - Oct 12 (but my brother will be around - he and I will be sharing this unit).
Hi there,
I need two bathroom fans upgraded. I will supply the fans/housings.
Current fans = Broan 684-N. (8x8 housing opening).
We need something with higher CFM. I would like to install NuTone QTN130EC (10 3/8 x 11 1/4 housing opening).
[There would be some drywall cutting.]
Unfortunately, there is no attic access -- we are in a townhouse, bottom level.
I've already removed one of the Broans (and purchased one of the NuTones).
Would like this done asap.
Appreciate your quote.
Cheers,
Derek
We have secured the Canadian distribution rights for Sanidoor. Sanidoor is a patented touch free swinging door system, serving as the final link in the chain for the total touch-free washroom experience. We will be selling the product to various markets across Canada through a sales force that will not be tasked with the physical installation of the units, establishing a relationship with installers is the purpose of this RFQ.
Installation includes:
* Basic Electrical: The Sanidoor unit needs to be connected to a standard electrical outlet (may have to be installed) or be hardwired.
* Basic Install: Installation manual calls for use of No. 2 & No. 3 Phillips head screwdriver, 3/16€ Drill bit for mounting hole pilots, Metric Allen Wrench set, standard pereonal protective equipment and other minor materials. Wires will need to be fished from the top of the door frame to the actuator mounted on the wall approximately 4' away.
* Finishing work: Units will be installed in both washrooms and major throughways. Contractor will have to provide proof of experience with drywall, tile, stone, brick, concrete, metal, wood, and marble as job may require installation on any of those walls previously mentioned.
* Startup Calibration: Simple data entry into digital display on unit to confirm door swing speed, and other options. Contractor will have complete access to the product design engineer for questions and will have a complete product training session.
Additional Information:
* Interested in receiving hourly charge and piece work volume discounts if applicable.
* Please include any information pertaining to territory coverage if your company has provincewide/nationwide coverage.
* Please advise of any clearance documents you and/or your workers have that may simplify projects requirements (i.e. security clearance documents for Federal government work, etc.).
We are currently looking for a qualified Electrician to help renovate a home in Victoria. Please e-mail to schedule an estimate.
Please also fill out the information below when you contact us.
----
Contractor's Name:
Full Company Name:
Contractor's Address:
Contractor's Phone Number:
How long you have been in business:
Your insurance information (ie, who insures you, and how long have you been insured):
Sending along a list of references would also be appreciated, as well as what types of work that you specialize in.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.
Click here to get started