Good day,
We are looking for a carpenter to do addition for our home. The house was built in 1993 and was built as a bungalow. We intend to build 2nd level and on top of existing level and completely new roof. Please let me know if we can have you help us out as well as giving us quote/estimate and timeline for the job. Thank you. You can also call me.
Hi, I just moved to Ottawa and there are four steps at the bottom of the stairwell going to the second floor that need to be recapped. The rest are done with red oak that was then stained. I just need someone to measure and order four custom cut treads (I have the risers) and deliver them to me. I can also install them and stain-clear coat as everything is already prepared for them. I'm attaching a picture of the area and I would be grateful if someone could help.
Thank you very much.
Marcello
36" wide x 80" bi-fold removed, replace with "french door" style solution.
New door is unfinished wood [shall need painting] Revised trim work / casing + paint finish]. This conversion shall match what exists at the front door coat closet [louvred door leafs, light weight].
Please provide a quotation plus provide a date / time to come review the site condition. Note: new door & hardware shall be supplied by owner.
THX
B.Rupert
We're looking for estimates on building a permanent roof/canopy in our backyard. The existing deck will be demolished before the project starts and we'll rebuilt a new one after the roof is installed. The size would be around 28x16, with pot lights and fans. See attached plan for a general idea, but we'd like it bigger if possible.
Note: Trusted Pro's form might show Markham as my location but that's because of Starlink. We're in Ottawa :)
Hello
Looking for a ballpark price to see if my budget will allow for this project. Main staircase treads and risers need to be stripped, sanded and stained and sealed. 11 treads and risers plus a 3x3' landing.
Also need 4 newel posts installed, approx 25' of railing, and 40-50 new spindles (black metal, attach with screws top and bottom). All railing components need to be stained and sealed as well. Need old railing system removed. There is a section of railing upstairs as well (not pictured)
I will provide the railing material, looking for a labour cost (rough) for this work. Don't need anything specific, just a ballpark and then I will see about having you in for an exact quote.
Thanks
Placing Tread and Riser to upstairs and basement stairs.
- I remove rug to upstairs
- I provide material
- You have all required tools and equipment for job
- You measure / cut / install treads and risers (tread have nosing edge).
Installation includes:
o saw off existing nose edges prior to installation of treads and risers
o remove metal toe bar on basement steps
o basement steps have vinyl tile covering – glued on
o top last riser to upstairs presently has baseboards – most likely glued on – TBD … might leave as is.
o larger platform for basement (presently has baseboards) – most likely glued on
o last bottom step and riser basement (presently has baseboards) – most likely glued on
o Install new quarter rounds
- I varnish unfinished wood
… Please add items/steps if I missed any items …
I have selected the below products –will also benefit minimum labour time:
- Solid unfinished oak Tread 1 1/16” x 10 ” (36” and 42”) with rounded nose (not protruding)
o In addition, I also have one solid oak set of 3 pie steps; can choose best option.
(I do not have a second set for basement).
- Oak 4’ x 8’ board cut to fit - unfinished Riser 1/4” x 7”
- PL Premium
I still have to get rounds, varnish, and paint.
Additional work -- I will have a couple of minor quick general repairs to add to request:
- A few kitchen cupboards screw securely
- Anchoring a closet rod back up
Question: Can you provide the nails for setting the boards?
I am not certain what nails to get.
Date of project: September 5 to 26 (weekend preferable).
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.
Click here to get started