Kitchen Tiles Installation

4/17/2013 at 3:08:41 PM

3.50 per sqft, up to 5.50 per sqft.

4/17/2013 at 3:13:15 PM

We would charge between $8.00 to $11.00 per square foot to install your backsplash tiles. This price includes thin set mortar required. Customer to supply grout (as there are lots of colors to choose from). There are a few variables, type of tile, layout of the tiles and the quality of the surface that we are mounting the tiles on.

I hope I have been some help to you.

4/17/2013 at 3:23:38 PM

It all depends on what tile you want. Tile ranges as low as $049 - $10+. As for the installation that also ranges from $1.50 per sq depending on the job and number of cuts.

Hope this helps.

Bryan

Townsbridge construction

4/17/2013 at 3:30:01 PM

I charge $4 a sqft and I supply mud and grout, I will also supply and install the new subfloor at a cost of $1.75 sqft, but there is a lot of different prices out there, best thing to do is have a few estimates done to compare prices.

Hope this was helpful.

4/17/2013 at 3:52:14 PM

4.50 per sq ft labour and supply set mortar for material. We cannot say how much it depend on tiles, and if there is plywood underlay need to install will be extra. For 180 sq ft you will need 6 sheets, that is 75 $ per sheet, supply and install. Customer supply grout and tiles.

Chadi

4/17/2013 at 4:13:03 PM

Hello, the cost would be $2 plus grout and tiles!!!

Serge

4/17/2013 at 4:21:10 PM

Hi,

We here at Beneath the bark feel that a reasonable price is $3.50 sqf. With that price you get scratch, mortar and grout. You only have to worry about your tile.

As for your base trim to install you are looking at $2.50 per foot and corners are $15.00.

Thank you for your time.

Chad at BTB

4/29/2013 at 12:41:30 PM

I would Charge anywhere between $3.00 to $5.50 per sq ft.