Ever wonder what you're neighbours are doing to improve their homes? Discover what other Toronto homeowners have planned for their Cabinetry and Millwork projects by reading the details of their request for quotes below.
In total, TrustedPros has received 68 Cabinetry and Millwork projects posted by homeowners in Toronto seeking the services of local Cabinet Makers. Total estimated value of these projects is $529,500.00 with a per project average of $7,786.00.
|City||#Projects||Total Value||Avg Budget|
We're interested in having two built-in cabinets made for our townhouse in Etobicoke.
The measurements are approximately 33.5w x 16.5d x 35h. We would like the cabinets to have doors as well - possibly with glass so that we can store our electronics (TV Box, DVD player, etc.) inside as well.
Would like the cabinets to be made of reasonable wood (higher quality than MDF or particleboard)
I am looking for a cabinet installer who has a keen eye for attention to detail, and does clean, quality installations.
I have prefabricated 5 built in units off site at a shop, which are now finished and need to be installed. All the units are made exactly to measure, so there will be no cutting or modifications neccessary. This is just simply an installation job for a condo renovation.
Below is a brief description of the 5 units that need to be installed:
1. Bar - This is a semicircular bar made of MDF to be mounted around a concrete 20" radius column. Bar may be fastened into concrete column with anchors or the floor (which is laminate floor on top of concrete base - condo)
2. 3'x3' MDF panel - this is a simple installation, an MDF panel must be mounted above the fridge going into drywall/metal studs (partition wall). This is just an accent panel which will be holding a picture. Installation must be installed so that it can support MDF Panel and a small picture which will be mounted to it (40 lbs total). This can be done by stud mounting or the use of appropriate butterly drywall anchors that can support that weight.
3. 1'x8' MDF panel - this MDF panel will be installed on the underneath side of the kitchen island. We will be mounting this panel to 3/4" MDF which makes up the bottom part of the kitchen island. Since the exposed side of the face is tiled, we will need to screw from the inside of the island into the MDF panel's frame.
4. Entertainment Unit - The entertainment unit consists of two parts - bottom Media console and top bulkhead accent piece. These need to be mounted against a partition wall made up of 1/2" drywall and metal wall studs
5. Office Bookeshelf built in unit - This built in unit consists of the bottom cabinet unit, 3 floating bookshelves, and one long shelf to be mounted above desk area. The units are going to be installed against a 1/2", metal stud wall.
This job should be max 5-7 hours work for one person. If the installer is only one person, I can have someone available to assist in holding the units in place while they are being mounted. Compensation for the job is $500-$700 depending on work/time involved. Please give me a quote, and some past project photos or references. The job is ready to be started immediately.
This is a brand new condo located downtown. There is parking available provided the vehicle can fit into the underground.
We have tile that needs to be set in the kitchen and bathroom. Heated flooring is already hooked up and simply needs to be installed. In the kitchen, there is an island that needs minor repairs and installation. There is also a dishwasher in the kitchen that needs to be installed. In the bathrooms, we need medicine cabinets installed.
Looking to build a credenza with file drawers for our home office. 19 deep x 30 high x 70 wide would be ideal. Door on both sides for storage and 4 drawers for filing. Mix of wood (looking like teak and lacker (off-white) would be great to match my desk (picture of the desk attached).
Attached are the renderings and measurements of the 3 closets in my condo (i.e. 2 reach-ins, 1 walk-in). Please provide me with a quote at your earliest convenience. It would be great if you could include the different prices of various finishing options in terms of material, colour, and hardware.
Thank you for your time.
I'm looking for a quote on an entertainment unit cabinet which would be approximately 16 feet wide, 2 feet deep and 9 feet high. In the middle is an existing nat gas fireplace which would need a bulkhead built around it, TV mounted above with cultured stone (surrounding the fireplace and TV approx 7 feet wide and then 2 floor to ceiling cabinets which would have closed door cabinets on the bottom half and 2/3 open shelves with potlights integrated on either side. I'm indifferent on materials as it will be white.
Job would be September timeframe.
2 Home Offices that require custom furniture.
1 includes a set of drawers and large shelving unit that fits existing desk top.
1 includes custom desk, with drawers and shelving unit.
I am an industrial designer and have accurate drawings of the overall design, but am looking for someone who is willing to discuss final details of design to confirm logistics of installation etc.
This is stage one of our custom furniture and will be looking to build a relationship for stage 2 that involves built in bedroom wardrobes, bed frame and shelving units.
Bookcase should be 6'high x 2'wide x 11 or 12" deep.
This bookcase will be used for storing shoes; should have 10 shelves plus the base and top of the bookcase.
The shelves should be placed at different heights (that will be specified) but all are the same size in order to store different types of shoes. Only 2 shelves should be able to adjust their height or location.
Material can be inexpensive, white color.
Supply build and install 60 in double vanity with a 12 to 14 in wide towel tower approx 7 ft tall with a crown mould cross bridge to the wall to accomidate pot lights over the vanity. In stall full mirror, supply and install either granite, marble or quartz vanity top. Not sure what to go with at this time. Can discuss the finer details of materials stains et. ....
I am looking for a contractor to assist with the planning and design of adding Ikea cabinets in my Den (8x8). Cabinets are not currently purchased. We would like the customized storage (ie. Pax units customized to fit) to run along two walls with a corner unit to maximize storage. If you can be of assistance, please do not hesitate to contact me. We are moving on August 22nd and would like to get this project done within the first week when we are in the new condo.
Hello - I am looking to have some ikea kitchen cabinetry assembled. The quote should not include a cost for installation, just putting the cabinets together.
In total there are 9 base cabinets (6 with drawers) and 3 80in cabinets (no drawers).
We already have a general contractor who will install however they need to be built.
I'm looking for someone to complete the work over the weekend of 7/8 May.
We have bought the Condo from a previous owner who has not opted in for the full kitchen and want to finish the kitchen using the exact same material used in the other part so that no difference is visible.
The kitchen is a open concept kitchen with eat in area. A U form part of it (see photo) at 145cm (left wall from the photo) 240m (opposite wall [empty wall]) and 145cm (right wall from the photo) are empty. Depending on the offerings we might decide to do all or 1 wall only or a bank etc.
Please provide how would you approach and range of cost and how you price your work. References, and info on delivery time are appreciated. The more detailed you breakdown your pricing structure the better.
Kitchen Area 9'8" X 9' 7"
* L-Shape counter with one side exposed to living room. Exposed counter to be paneled or finished. This cabinet would require provisioning for stove. ( Length 9' 8"+ 5' including stove)
* Wall mount cabinets including Stove hood (Length 9')
*Pantry and Cupboard including provisioning for fridge and oven (Length 6')
We are looking for subcontractors for ongoing work for approximately 5 to 10 Units per month for the following work
Kitchen cabinets installers: just installing
- complete cupboards (per Sq.ft. )
- countertop ( straight )
- countertop ( L – shape )
- Door ( either upper or lower set )
- Drawers ( per set)
We would like to have some floor to ceiling built-in units (open and closed storage) on either side of our fireplace - and a built-in bookcase in our dining room, made out of mdf. Either side of the fireplace is approx 4 feet wide - 9 feet tall. Would also like to replace our fireplace mantle.
This is just a random piece that I say at a store, but basically I would like something like this kind of a cabinet but with a few medications to this design. The wall where it would be is about 84-112 wide x14-19deep x71 to 108 high. Wood and white. Please email or text me a quote and when you would be available to do the job.
I need custom cabinetry and a reception desk made for my optical store that I am opening this summer. I already have the design in mind and have pictures for reference. Some of the displays are similar to the displays in one of my close friends optical stores so I can take you there for reference as well. I would prefer somebody that has worked on an optical store before or at least on commercial projects. I've received quotes between $14000 and 30000$. Honestly speaking, I don't want to exceed 22-23 thousand depending on quality.
I am looking for someone to build some pine shelves around the fireplace in our home. The fireplace has a bulkhead around it so I would like the shelves to fill in the open space around it. The space is roughly 8' high, 55" wide, and 14" deep on either side of the fire place. Ideally we would like to to have some doors on the bottom but it is not a necessity.
I've been quoted $10,000 for custom built-ins but I am not looking for something of that magnitude. If this is something you would be interested in please contact me with an estimated price range.
The house is located in North York near Etobicoke.
I am looking to have my cabinet above my oven shortened to fit a microwave/range combo. I need the cabinet shortened to 24 inches. I already have shorter doors, so it is just the inner cabinet itself I need adjusted and it needs to be able to support the weight of a microwave range hood. I would also need the exhaust vent adjusted accordingly, likely a need damper as well. Please provide rough estimates on labour in reply. If you have not done this job before please do not reply.
Photos are attached.
I would like to have the space shown in the photo filled with an very simple built-in bookcase. The space is approx. 50.5" W x 100" H x 11" D.
The walls on two sides are drywall over brick. I am happy to paint to save money, or could be done in MDF. It will be white, ultimately. I think about six shelves would be about right - most books are hardcover/coffee table sized. I would like a simple trim to frame it, as well. Any ideas to make it slightly modern looking would be welcome. I am on a tight budget but want it to look nice!
I would like it done next week on Saturday.
Thank you for being as specific as possible in your reply!
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started