Ever wonder what you're neighbours are doing to improve their homes? Discover what other Edmonton homeowners have planned for their Electrical projects by reading the details of their request for quotes below.
In total, TrustedPros has received 111 Electrical projects posted by homeowners in Edmonton seeking the services of local Electricians. Total estimated value of these projects is $727,000.00 with a per project average of $6,549.00.
|City||#Projects||Total Value||Avg Budget|
Move wall switch to another wall (the floor below is all drop ceiling)
Install an electrical outlet as there is nothing present now.
Install wiring for a ceiling exhaust fan (bathroom has no existing fan)
House is older so no GFCI for the bathroom wiring which I would like to add.
We have several projects that can hopefully be done in one contract.
1. Convert/change a timer switch for interior hallway lights of a 12 suite condo to a light sensor switch.
2. Add a floodlight to illuminate the parking lot.
3. Add a (color) security camera for front and rear entrances. This will include a digital PVR (located in the electrical room) and linking this up to the building's cable TV service via a modulator. The job will involve running (plastic) conduits on the exterior of the building that is big enough to accommodate all of the wires needed for the light sensor, flood light and cameras.
The president of the condo board (me) has a background in Electronics/video and would like to talk to a versatile contractor about $$$ estimates.
Urgent Action Required
House built in the 50's, but has had upgrades.
This is a time sensitive job.
1. Rewire and install light switches,
2. Fix wiring for outside light, and a couple lights inside,
3. Put in a garage light.
This is a small job, as numbers 1 & 2 are somewhat connected. It is basically just putting the entryway light switches in a new location. Everything is quite open, and the ceiling is easily accessible. I think that all the required wires are tagged as to the light they belong to. So it just a redo type of job.
Number 3 is if possible, not urgent.
Need an electrician to do the following electrical finishes :
-install 4 light fixtures
-install 11 outlets and 2 GFIs
-install 9 switches & 2 dimmers
-install two in ceiling speakers
All the wiring is run and boxes installed, just need to do the finishing touches. Really easy job, should take a couple of hours.
Wondering if you're interested in designing and doing the build out for the electrical in a car wash that is being built in SW Edmonton? We have available a drawing of the proposed floor plan for the car wash which we can email to you. The car wash will have 10 wand wash bays and 1 automatic wash bay on the side of the building. Thank you,
As shown in attached photos there is a bunch of existing wiring that needs to be rerouted to make way for our new kitchen. Plus, new locations of counter, island and fridge outlets. Oven is remaining in the same location and should not have to be moved. Two kitchen ceiling lights need to be moved. I will do the dirty work with punching holes in the attic and running the wire. Permit will be required. Electrical panel is 100A, directly below the kitchen and has lots of empty circuits.
See attached photos and let me know if you have any questions.
I require some additional lighting in the main-second floor stairwell and a light fixture installed in the master bedroom (2nd floor). The walls to the stairwell and the area above the master bedroom is accessible from the attic.
I also have what appears to be the original electrical panel from 1972, so the panel may require upgrades to meet current code requirements.
We have a finished backyard with electrical wire buried under stone steps along the side of the house. Both ends of the wire are outside the house, are not buried, and are not connected to anything. One end needs to be connected to the electrical panel box inside our basement, the other end needs to be connected to an outdoor post light. We are looking for certified electricians and online estimates only. Thanks!
1940s 1200 square foot semi bungalow. Seller upgraded to 100 amp service two years ago. We have torn out the kitchen to replace drywall and cabinets. Upon opening up the walls we realized the electrical upgrades that will be needed including either a sub panel or bigger box and upgrades to Wiring to most of the house to bring it up to code.
Office condo renos needed. Project includes:
1. close off existing hallway, by adding a door
2. re-position door in two separate offices
3. close existing three wall space by adding fouth wall and door, to create a closed room
4. run electrical to second floor storage room, to create a computer server room
I'm looking for online estimates only.
Hi Electricians needed for quotations for a basement development
Scope: Provide Power and Lighting Installation for Basement development
Deco Switches and Plugs, Telephone and Television Outlets., GFCI for bathroon and built in aquarium.
3-5 new circuits. (2 avail breaker space, rest will have to be upgraded to dual pull 15Amp breakers)
2 for home theatre
1 for aquarium
1-2 for everything else.
Run conduit for future A/C unit
Pot Lights for lighting 10 pots, 3 ceiling lights + 2 cieling JB's for theatre room (1 for recessed screen and 1 for ceiling mounted projector)
Dual 15amp breaker switches
Cutting and patching of forst wall vapor barrier
Plan layouts available. Aprrox 1000sf floor space.
New home purchase. Pre-sale inspection report recommends a professional electrician have a look at a couple of sore spots & provide an estimate. Looking to have the estimate & work done by the 10th of September, but will settle for a complete estimate, and work dates scheduled by then.
At the minimum, the job is likely going to entail grounding of 4 outlets, and terminating a wire in the garage.
Interested contractors should provide all details this website advises me to ask of you, including insurance / WCB coverage, and a couple of references; saves us both one step in the conversation!
change light in master bedroom closet, current light not working at all
stove/range hood, fan with light
change lights in three bathrooms
check deck light, changed light and still does not work
outlet in living room not working
House built in 1977
lights for job have been purchased
2 story house plus basement
previous renovations: garage door, house door, siding, furnace, washer, fridge, windows
Bought a new house taking posession Nov 1st. Would like to schedule someone to come in and do the following work (ASAP after or on Nov 1st):
2 new electrical outlets in living room
Switch out electrical outlets in kitchen to GFCI (Ground Fault Circuit Interrupter) outlets
Add a cable outlet to living room
I require some electrical upgrading in our bsmt suite in order to make the City happy; 3 way switch, fridge on its own circuit, GFI's, install wireless detectors, etc. I have a list but not a big list of items to complete. I believe they are wanting a master electrician; need to pull the electrical permit. I would like this work done asap if possible. Many thanks in advance for your interest.
Basement Renovation in 1954 Bungalow
Laundry Room and Bathroom renovation.
Ceiling completely exposed.
New bathroom in basement requires new gfi plug, vanity light rough-n w/ switch, bathroom fan installation w/ switch. New circuit on existing upgraded meter. (approx 25 ft lin ft). (Owner will supply bathroom fan and vanity fixture.
Require New laundry electrical plugs (washer and dryer) on newly framed wall. Remove existing laundry wiring to old panel "junction box" at back door above. Run new wiring to to existing breaker on panel. (approx 25 ft lin ft)
Laundry room light roughing to existing new panel.
Junction box in ceiling to outdoor plug to be removed. Run outdoor power to new separate circuit on existing upgraded panel.
New laundry room light rough-in to existing new panel.
Possibilty to have 2 existing plugs in bedroom immediately above laundry room (ceiling exposed) be on their own circuit on new panel? (Will need to confirm onsite)
1360 sq ft bungalow in Edmonton requires rewiring with copper wire - currently have aluminum installed. Basement is unfinished and will allow access to walls on main floor. The house is 36 years old and for insurance purposes upgrading to copper wire is required. Currently have 120 amp breaker. Not sure if this will require replacement.
Currently have some issues with some plug ins not working and there is a concern with plug ins for computer room and entertainment center being overloaded. Additional plugins/breakers may be required for these areas. Entertainment center is in basement.
Hi there my name is Laron, and i need to install 2 15 amp breakers or 1 30 amp ( which ever makes more sense) I am living in an unfinished basement and i have 2 outlets to run off of. 1 outlet is from a spare room to 100 FT extension cord (10 AMP 1250 Watt) run off of a Sub breaker. The other outlet is run off a regular 2 socket outlet with a 6 socket power bar/pad attached to it is a Phone modem, Washer, Fridge. deep freezer, utility light and an Computer running as a server. Everytime a load of laundry needs to be done in the washer the server has to be shut down or the breaker trips mid cycle (too many amps im guessing). if i move the server onto the Sub panel (100 FT Extension cord) the breaker on the sub panel seems more prone to being tripped, and there is some issues with the pilot light going out on the water heater.
-need to install proper parts/breaker(s) etc to run 4 computers without affecting any other appliances
I have a few small projects in my home that need some expertise:
Installation of a fan in the bathroom
Switching stove fan to over-the-range microwave (would include resizing the cabinets)
Repair drywall (around electrical panel, very small area)
3 small plumbing leaks
1 light in the basement not working
Looking for quotes for a nearly whole home rewire (kitchen and basement already updated). Older home (1930) with K&T throughout main and upper level. Plaster walls (hope to keep them intact) with NO insulation in them. Wide baseboard (6") should provide a way of hiding most of the work. Would like to upgrade service to 200amps as I will later build a basement suite and a shop out back. Panel upgrade.
Also looking for dishwasher circuit, safety plugs (kidproof), some USB outlets, CAT6 network to most rooms.
Please email if interested.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started