Ever wonder what you're neighbours are doing to improve their homes? Discover what other Bradford homeowners have planned for their Deck projects by reading the details of their request for quotes below.
In total, TrustedPros has received 27 Deck projects posted by homeowners in Bradford seeking the services of local Deck Builders. Total estimated value of these projects is $209,000.00 with a per project average of $7,740.00.
If you're in need of a contractor for your Deck project, use our job posting tool to get matched to local pros or browse our directory of Deck Builders in Bradford .
City | #Projects | Total Value | Avg Budget |
Newmarket | 40 | $372,500.00 | $9,312.00 |
Richmond Hill | 42 | $361,500.00 | $8,607.00 |
Innisfil | 33 | $336,000.00 | $10,181.00 |
Aurora | 26 | $204,500.00 | $7,865.00 |
Bolton | 20 | $164,000.00 | $8,200.00 |
Keswick | 20 | $181,500.00 | $9,075.00 |
Bradford | 27 | $209,000.00 | $7,740.00 |
I have over 700 sq ft of pavers (8" x8") and some (4" x 8") that were given to me from a relative. I would like to build a 500 to 600 sq ft patio with some short walkway either side. You supply everything but the pavers, meaning you excavate, prepare base and install pavers.
I want 8" excavation, 6" with 3/4 crusher run as base, 2" bedding sand, then pavers atop. Given the grading I believe pavers must be placed above ground as there is a builder made swell for drainage of water to both sides of the yard. Two (2) steps to be built with same pavers if possible. Some re-sodding may be required afterward.
Depending on your equipment size (no jokes please) a segment of the fence/posts may need extracting. You are not to damage my neighbours adjoining property.
The home is 5 years old with a completely pristine backyard having simply grass and a pressure treated t fence on all 3 sides. This is a 43' lot.
Amenable to a simple square design with minimal cuts preferred.
I have approached and been approached by many contractors but my budget is no greater than $2500-$3500 total and I will accept no short-cuts in quality, appearance or installation. If you insist I need only dig 4", I don't need your services.
Cooler weather coming week of June 25th...let's get going!!!
Thank You,
Frank
Need two 6-foot porch posts replaced. One post is weight bearing and the other is just cosmetic.
I have the fiberglass posts with decorator top and bottoms. I also have a jack-post that I believe could be used to raise the porch roof although I have no idea how much weight the post is supporting.
I am looking for someone who is confident they can cut the fiberglass posts to the exact length and the angle is such that the weight on the bottom of the post is distributed evenly.
The attached pictures give you an idea of what you are working with.
Thanks
Randy
I have a sunroom that was built on top of a deck. Underneath the deck was insulation. Animals got in and tore all the insulation down as there was no cover. I need someone to put new insulation in, then plywood or something over it. I also want a new plastic lattice put around the outside for appearance and to keep the animals out. I'm looking to expand the deck at some point in the future as well, but this is something that needs to be done now.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.
Click here to get started