Categories

Old milk paint on plaster causing problems?

Question Icon
Posted by: from Murphysboro
10/14/2017 at 7:53:26 PM

I'm moving into a house built in the early 20th century. According to the previous owners, the majority of the house has plaster walls painted with old milk paint. They say the paint is to blame for any new paint being applied to peel off on the roller along with any other old paint that is on the walls. What are my options to overcome this problem? The current paint is AWFUL - creme with brown mishappen sponge paint technique- and I have to do something!

I have searched the internet and haven't found much help about this problem. Is it really the old casein paint like they said? Do I need to remove all the old layers of paint and start fresh? Any help is very appreciated!!!

REPLIES (5)
User Icon
Dusan from D2 Paint in Oakville
Date/Time10/15/2017 at 7:53:05 AM

The answer to fix it is to remove it and re paint. Simple. Thats if you want it done right.

Let me know if you have questions.

User Icon
Date/Time10/15/2017 at 10:22:51 AM

Hi Christen,

A couple of other things you can try. Go over all your walls you want to paint very carefully

and scrape off all the loose paint and possibly plaster. Order a OIL based Primer

( High End ) Benjamin Moore or Ralph Lauren

NOT HD or Canadian tire paints. only get a Quart and try it in one small area and yes use a small foam roller as well to see if it works. Most ( High end ) paints will stick to

this primer now pretty good. if this does not work. You can try to skim coat the walls with plaster/joint compound and then prime and paint as usual.

Good luck

User Icon
Date/Time10/15/2017 at 11:38:52 PM

It has a very simple solution! Hire someone who knows what to do . It is little extra work but possible to fix. This is why we have bonding primer. Any good painter can fix it.

User Icon
Date/Time10/16/2017 at 9:49:44 AM

I recommend you scrape off any loose paint with a wire brush or equivalent. Use extreme Bond primer from Sherwin-Williams this should take care of your problem. If that don't work rip the plaster off and install drywall. Call the pro. Thanks Jeff

User Icon
Date/Time10/17/2017 at 6:34:30 PM

Use tsp and scrub the walls first and scrubit off good anything that will come loose with moisture will then flake then scrape back any flakes till it stops smooth out with mud and sand then paint or hire someone whos good and painting useing a sprayer

Search the TrustedPros directory and discover the best contractors in your area.

Find your home service pro
Great renovations start with a great contractor.

Since 2004, TrustedPros has been helping homeowners find the right contractor for their home improvements and repairs.

Post Your Project

Within hours you'll be comparing offers from top-rated professionals. It's free to post and you're under no obligation to hire.

 
Trustedpros Inc. does not warrant the accuracy, completeness, safety, legality or usefulness of any Content, or Whether Content is Current and up-to-date, and TrustedPros Inc. Shall have no liability whatsoever with respect to your use or reliance upon any content or for content being removed or otherwise ceasing to be available. Please refer to the terms and conditions of use of this websites for more details.
Categories

Get quotes from top-rated contractors

x