Ever wonder what you're neighbours are doing to improve their homes? Discover what other Hamilton homeowners have planned for their Electrical projects by reading the details of their request for quotes below.
In total, TrustedPros has received 92 Electrical projects posted by homeowners in Hamilton seeking the services of local Electricians. Total estimated value of these projects is $435,600.00 with a per project average of $4,734.00.
|City||#Projects||Total Value||Avg Budget|
We have a single floor bungalow with an unfinished basement, approx 900sq ft, with 1 bathroom. The house (according to the home inspection) was built in the 1930s. It has had upgrades to wiring (copper 100amp) and plumbing (copper).
We want to:
1) Replace the water pipe coming into the house.
- The pipe currently has lead.
2) Install a new gas range
- There is gas service in the kitchen but it need to be moved or extended about 5ft (estimate)
- There is a old gas range currently installed, this needs to be removed
3) Install a new extractor fan
- New extractor fan to be installed over the new gas range
4) Create vent for extractor fan
- Extractor fan needs to vent through wall to exterior
- A vent may exist but is covered up at the moment, or a new vent can be created
Please quote item 1 separately, and indicate if you will secure necessary permits. Please indicate if you have had experience with the Lead Pipe Program offered by the City of Hamilton.
Please also include an estimate for project timeframe and availability. Please include website and references.
I have an older house that has what looks like knob and tube wiring used to ground my electrical panel (100 amp). I am wanting to sell my house and people see this wire running over and connecting to the water line. Can I just remove this or does it need to be replaced with something else?
I am opening a new store in Hamilton Ontario and as part of renovation it needs some electrical jobs. I am looking for an electrician company with the best price and quality job as well as some job references.
The City Permit will be ready on Nov. 25 and we can start the Job same day or the day after.
Electrical Drawings are available
The Landlord requires the contractor to be insured and has WSIB Certificate
Please Contact or reply to me for a quote if you are interested in the job and Can start the job on the date mentioned above.
Thank you very much for your time.
We would like to have an electrician change our fuse panel to a breaker panel.
We also want 2 extra light fixtures and light switches added (with all wiring) in basement.
We would also like electrical run for a stove and one new plug added with wiring in lower level
Add one plug in upper bathroom with wiring as none currently exists.
Add GFI switches to fuse panel on some circuts.
Project located in central Hamilton on the mountain. Work to begin immediately.
We are looking to update our current electrical system throughout our house. We live in a house built in the 70s, and the electrical does not look ot have been touched since. We have aluminum wiring throughout the house, as well as a CSB 100 amp fuse box. We have heard a lot about the concerns regarding mixing copper and aluminum wiring, as well are having some concerns as some of the older outlets do not work. We are looking to update it all by putting in a new breaker panel, rewiring the house with copper wiring, as well as replacing a lot of the older outlets and fixtures. We are looking to find out information with what all would be involved with this type of project such as permits, inspections required, timeline, cost, as well as damage to things like the drywall and the rest of the house.
I have recently purchased an investment property in Hamilton.
It is a century old Edwardian house configured into 4 rental units.
The home inspector discovered some new and some old (knob & tube) wiring plus some not up-to-code issues. Some of these include some improperly installed wiring and junction boxes.
I would like to get a quote on bringing the wiring for the house up-to-code.
Currently, there are three hydro meters; I would also like to install another one (for the common areas incl. the basement).
The house has 10 rooms, 4 kitchens, 4 bathrooms, unfinished basement with the footage of about 2500 square feet.
-37 year old home
-wiring is nonsensical, too many rooms/receptacles/lights per breaker, disorderly pattern of breakers/rooms
-some breakers not assigned?
-aluminium wiring, w/copper upgrades at boxes
-'hot' neutral wires
We have experienced a short that has taken power from a bedroom, two hallways, and a bathroom. All the assigned breakers test as working. HELP!
Our existing bathroom fan stopped working. We need either (a) to get this fan fixed (if it is possible) or, (b) to replace it with a new one. The existing fan make and model is : AIR KING, BFQ 90. It is about 12 years old. We prefer this model because it ran very quietly and efficiently.
Looking for an electrician to quote on a garage. New construction. Garage is 22' X 24' Will need supply run underground to concrete pad Panel is approx 10' from corner of garage.
This garage will have 3 pot lights in the soffit (outside) 2 4' florescent lights inside & a receptacle every 12' (2/ wall 6 total) Also a exterior light near man door A garage door opener will also be installed so we will need a receptacle on the ceiling
Please quote with all material & labour
Looking for an electrian to upgrade current house amp wattage to 100. House's fuse panel states the house currently has 100amp service but the actual wire connected to the house needs to be upgraded to the 100amp.
The house is already sold and this is a condition that needs to be met prior to closing on March 27th. Ontario Hydro will also need to come and inspect the work to verify completion for the new owners.
Quotes and a timeline would be appreciated.
We are looking for an electrician to reroute the wiring in the basement so that it all goes through the currently exposed joist space (rather than below it), so that we can finish the ceiling.
We also need 2 baseboard heaters installed on the third floor and a security light installed at the back of the house.
The house is an old one, built in the late 1800s but all of the wiring and breaker panels are up to date.
We are a property management company located in Burlington.
We are looking for a licensed and master electrician for a job in Hamilton.
We need the house rewired and the panel changed from 60 AMPs to 200 AMPS (it will be converting into a student rental).
More information can be provided on the job site. This job is requested immediately and we need quotes ASAP.
I'd like an electrician to replace the dated wiring, fix some interesting solutions, and rough in an outlet for a washer and dryer.
It's a 1893 double brick, lathe and plaster home. We'll be working in about 1700 sqft. Most of it has already been removed but parts have been left for us.
I have a very small and simple job, and looking for a cost effective repair from an ESA licensed Electrician in the Hamilton Area. The home is located near Upper James and Mohawk.
We removed an old addition at the rear of the house, and basically there were some electrical items that were previously okay for interior use but is now exposed to the outside.
Scope of work:
1. Loose wire hanging that needs to be placed in a plastic conduit and secured to the brick wall.
2. Attached to this wire is a junction box that is also not rated for exterior that needs to be replaced.
3. There is a 2-gang box containing a switch and an outlet off of the same circuit at the bottom of a basement walkout that needs to be changed to an exterior type.
4. Light fixture that need to be changed to the exterior.
I am okay with going with the lowest cost materials as long as it meets code. I have attached some photos. If you can provide me with a ballpark quote that would be great.
Replace five light fixtures with new fixtures. Replace two light fixtures with new ceiling fans, total seven installations. Two fixtures are in a vaulted area (12') and would likely be a two man job. One fixture is replacing a pot light and would require support (20.25lb) light.
I have recently purchased a 39year old original owner bungalow in east Hamilton off Greenhill Ave.
The basement is finished but I am gutting it and starting over. I see this as a potential opportunity to replace the aluminum wiring (ESA certified yearly) with copper. The house has had 2 recent renovations (kitchen and main fl bathroom) where I believe copper wire was installed.
The panel is 100amp currently.
The main floor is approximately 1250sq feet (assume same for basement).
I am also interested in putting recessed lighting in the living room and as part of the basement renovation.
I am only asking for a quote on the rewiring and recessed lighting options.
Our house was built in the 1970's,so the wiring is probably along the same timeline. We have a new range hood to install and I was going to do it myself, but the house wiring is on the left and the hood is wired on the right side. The cables are not long enough. Someone also told me that there is aluminum wiring and we need a junction box, and I should get a pro to do that. The old hood is down and the new hood is ready to go. What would an estimate on this job be?
century home needs knob and tube updated. basement is finished with updated wiring. main level is not, second level is not. kitchen, bathroom, dining room, living room, 3 bedrooms. was quoted 7400$ but seems steep. house is empty but do not want to have to redo too much drywall etc. needs to be fairly clean.
I would like to have a light fixture moved. Currently, it hangs from a hook, and the electrical box is approximately 6 feet away.
It is in a kitchen on the main floor. The second floor is finished so impossible to access through the ceiling. Ceiling is tiled, hoping for no damage... Not sure which way the joists run.
I have pictures of the ceiling upon request!
So the power in two rooms upstairs is out. It sometimes comes back but it hasn't for like 3 weeks now and I really need it fixed. I have a limited budget, due to personal and family problems. I think it has something to do with the breaker box itself - but I don't want to go messing with it. I know it's not just like a fuse flipped off or something.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started