Ever wonder what you're neighbours are doing to improve their homes? Discover what other Oakville homeowners have planned for their Bathroom Renovation projects by reading the details of their request for quotes below.
In total, TrustedPros has received 140 Bathroom Renovation projects posted by homeowners in Oakville seeking the services of local Bathroom Contractors. Total estimated value of these projects is $2,278,500.00 with a per project average of $16,275.00.
|City||#Projects||Total Value||Avg Budget|
I would like to get a price on an installer putting in 3 brand new toilets in a rental home I won in Ancaster. I will supply the brand new toilets - two piece toilets basic going in and two piece basic toilets coming out.
Please give me a price with you taking the old toilets away - and a price without.
Would need all three toilets installed at once - house is vacant.
We have a bedroom in the basement of bungalow. We would like to add an ensuite washroom in between the closet in the bedroom and a washroom that services the rest of basement on other side (So ensuite washroom would be sandwiched between adjacent washroom and bedroom closet). Washroom would be small...about 5' W x 10' L including space for shower stall.
To do this, a doorway will need to be cut through cinder block load bearing wall. We need a rough-in for shower, toilet and sink. We would need someone to take care of permit and have drawing stamped by mechanical/structural Engineer.
1) Permit and stamped drawing
2) Doorway cut into cinder block wall
3) Rough-in for washroom and vent
4) Cut through to outside for an exhaust fan
We are gutting a bathroom in our basement. It will require redrywalling, new shower installation to replace a kit type shower, complete with tile, new vanity (freestanding) and toilet installation. New floor tile and possibly some other tiling in the room. Room is approximately 8x6. Need an approximate price for labour only.
We live in a 20 year old house with 2/3 of the basement finished. I need to put a basic, nice bathroom in the unfinished area. there is a rough-in although my understanding is that it needs to be moved (concrete floor cut). I am looking for a shower, sink and toilet, perhaps linen closet. I can do the easy stuff (painting, installing vanity etc.) once the hard stuff (shower, tiles etc.) is done to keep my costs down. Would like someone with experience with Schluter Kerdy for the shower system.
We have already had drains installed in our basement for a 3-piece bathroom (toilet, bath and vanity). Need yo have the hole ( approx.4 x7 ft and around 6 inches deep) filled in with stone/gravel base and concrete, and making sure the concrete is placed securely under egdes where the floor is currently compromised. I've already purchased the concrete.
Would like the work completed by Sunday Dec. 6. Weekends preferred but may be able to accomodate weekdays.
r/r laundry tub, move plumbing to wall, prepare 2 walls for track and stud (19 feet), r/r 1 sheet drywall, finish heat vent, vapour barrier (8 feet), create plywood counter (apx 3 x 6) and finish with tile and backsplash (apx 3 x 3), replace door, paint floor with epoxy, tape, prime and paint 24 feet drywall, install drop in laundry tub with faucet.
I supply door, passage door knob, laundry tub and strainer, faucet, floor epoxy and tiles.
New tub and shower with rain and hand held shower head with pressure/temperature control. New tiles all around with accent tiles and soap tray indent. Have two weeks to get it done. 5.1 ft by 2.7 ft and 7ft tall. Need to find someone to do it ASAP, within the next two weeks finished! Thank you! Budget around $2000.
Hi, I would like a price to reno washroom
remove existing tub, tile on 3 walls.of tub area, (no ceiling tiles)
remove linoleum floor
remove wall on one side of tub area to open up area for new shower and install glass shower doors.
(H 8 ft x W 2.6 ft)
remove existing bulkhead of shower.
Price to include a complete fully functional finished bathroom, all materials, all pumbing, all electrical, drywall, paint.
install new ceiling exhaust fan (Panasonic whisper) connect exhaust duct to outside wall (roughly 5 ft to outside wall)
install cabinet, sink, faucet (single level Grohe)
new tiles on floor
install new tiles in new shower area
install a bench seat in shower area
install complete Grohe shower system
include all grout, mortar, Schuler Ditra on floors, and shower
install glass shower doors (L shaped )
painting of washroom
bathroom total dimensions
L 10ft x W 5.3 ft
existing tub area
L 4.9 ft x W 2.6 ft X H 7.3 ft
existing bulkhead of tub area
L 5.3 ft x W 2.6 ft x H 0.75 ft
MUST HAVE expewrience working in Condo's.....
CONDO- bathroom reno. Pull out existing tub, remove existing stand-up shower, make a walk-in closet with shower stall extending existing closets. Build a glassed-in shower wall-to-wall. Move and replace existing vanity. Close in entrance to ensuite. I WILL BUY MY OWN MATERIALS.
I need to convert my laundry room in the basement to a wheelchair accessible 3 piece bathroom and move the washer/dryer to the other side of the basement.
There is no rough in for the plumbing and the walls are not framed.
The shower cannot be raised off the floorsince iit must be wheelchair friendly.
The house is approx. 45 years old.
Looking for quote for installation of 3 piece basement bathroom. The drains have already been installed by a professional plumber. Below is what we need done
- area approx. 5 3/4 ft x 7ft
- removing the old drywall from the ceiling
- boxing in the gas pipe that runs through the ceiling
- building framing for the 2 walls
- building framing in the bathroom
- installing and hooking up all bathroom fxtures
- installation of: 1 potlight, 1 fan, 1 fixturelight, 1 recepticle, 2 switches
- installation of vapour barrier
- drywalling in the bathroom, plus taping & sanding
- tiling of the bathroom floor & walls (leveling floor with concrete)
- installation of the inside bathroom door
Would also like contractors to confirm approx start date for the job (from today) and length of time required to complete the job
Looking to gut and remodel upstairs main bathroom and powder room in Mid March
House was build in about 1965 and bathroom have never really been worked on
-Looking to relocate Current tub position and make bathroom bigger by opening up wall in master bedroom.
-Move position of current sink and toilet and add custom stand-up shower.
Please only serious inquiries with references
A complete tear-down bathroom reno with freestanding tub, zero-threshold shower, recessed lights, floating cabinet, pocket door, wall mount faucets, ceiling-mount shower head, and tiling throughout. See diagram attached. Must have prior experience with zero-threshold shower.
Main bathroom is to be expanded slightly to allow for a larger bathtub installation.
Bathroom will be completely gutted to the studs prior to any work commencing.
Work to be done includes:
Carpentry, to frame one new wall, bathtub installation, possible subfloor repair/replacement.
Electrical, to wire new lights in shower/tub area.
Plumbing, to connect new tub and spa fixtures, install sink and toilet.
Drywaller, to drywall and tape all foor walls and ceiling.
Tiler, to install glass tile on tub/shower surround and install slate on floor.
All materials such as tub, toilet, vanity/sink, exhaust fan, floor and wall tiles are on site.
We want to replace the bathtub and tiles, and two sinks leaving counter top as is in the kids bathroom and want to remove the gas fireplace in the leaving room to rearrange layout.
We would provide the tiles, bathtub and sinks, contractor selected will provide labour and consumables. for living room contractor will supply all material en labour.
Master Bathroom needs an upgrade in materials and finishes
Room needs an upgrade from "builder's" quality
Bathroom 9' x 10' approx.
Design Build - Contractor to obtain necessary permits and arrange inspections
new tile floors - unheated
Vanity 60" with added lighting
Custom shower approx 46" x 46"
Tear out of corner tub and replace with better quality or free standing tub
new fan and lighting
Note: all companies quoting this job, as well as their sub contractors, must have at least 2 million Liability Insurance and WHIMIS.
Please see Scope of work Below:
Description of Work:
Take down and removal of old materials
Install new tub, complete with faucet and required plumbing
Install new tile around shower
Detailed Outline of work deemed necessary:
1. Remove existing tub, shower wall tile, backing and fixture and dispose of waste.
2. Make sure that effect areas are completely dry before rebuilding.
3. Treat area that has any mold growth.
4. Ensure floor joists and studs are in good condition before rebuild.
5. Supply and install Durock cement board - by USG. Secure cement board with Durrock anti corrosive wood screws.
6. Install Durock waterproof tile membrane - by USG over the cement board. Install to manufactures specifications. or equivalent
7. Supply and install 2x8 blocking to install proper grab bar. This should be installed prior to installation of the Durorock.
8. Supply and install grab bars. Chrome plated Peened finish. Placement and the number of grab bars will be determined a site visit. (Suggested; 1- 24€ vertical grab bar located on the same wall as the shower fixture on the outer edge. 1 24€ on a 45 degrees angle a long the shower wall.)
9. Supply and install Neu- Chateau Model # 2142R/L with slip Resistant Bottom By Crane Plumbing.
10. Supply and install Bayhill Chrome 82244HH Chrome Post-Temp tub/shower By Moen
11. Supply and install wall tile in the tub/shower. Supply and install all necessary tile edging and caulking where required. Tile style and colour is to be selected by Program manager from Contractors selection catalog.
12. Clean site and dispose of all debrie.
Please look at the floor plans and photos and submit a quote. A site visit is not possible since we take possession of the house in mid-January with a move-in date four weeks later. It is during this time that we would like the renovations done.
Floor plans and photos are available in the linkclick here Floor Bathroom (5 x 8 ft)
a. remove all tile in bathtub area and floor
b. install new tile in bathtub area, floor, add tile on half wall of tile behind toilet and vanity. Tile and grout supplied by us.
Third Floor Bathroom (6 x 12ft)
a. remove all tile
b. enlarge shower to full width of bathroom (there is a niche and a bit of a walk-in closet in the area to be expanded into). This requires plumbing to be moved to where the niche is currently. We will supply rain shower head and shower bar and handle.
c. install new tile (35sq ft floor, 18sq ft shower floor, 6' x 4' wall tile). Tile and grout supplied by us.
d. half wall next to toilet with full glass to ceiling (or glass floor to ceiling... whatever is easier).
Tile is TBD but probably 12x24 porcelain tile laid horizontally.
I firmly believe a good contractor will be able to make a good quote based on the information provided so please do not ask for a site visit.
I have a basement bathroom, approximately 5x6 ft. There was a water leak so i believe there is going to be damage, at the bottom of the drywall so i believe there is going to be some mold behind the wall. The floor currently has vinyl flooring and i would like to put down tiles and would like a new shut off valve installed.
I have all the materials, I just need the work done.
We would like to update one of the second floor bathrooms in our Oakville home. The house is approx. 13 years old. There is nothing wrong structurally with the bathroom but we do not like the builder basic fixtures we inherited. The job includes:
Replace floor tile, vanity, taps, mirror and ceiling fixture. Remove old towel bar and install new one.
Repaint and add backsplash tile. (The existing bathtub and tile surround remain).
Ideally we woudl like to complete this remodel within the next four weeks. We are not changing the location of any plumbing or electrical fixture. Depending on cost we may want to add a vanity light fixture (currently there is no box for it).
We would provide all new fixtures, tile, taps and paint. Construction supplies - we could purchase or the contractor could supply. The overall tile floor surface to be replaced is about 40 sq. ft. (Not a big bathroom)
We are looking for a contractor (preferable from our area) who has completed at least several similar jobs (bathroom renos) in the last two years and who can provide references.
Post your project and let top-rated pros compete to get your business. Compare bids, read real customer reviews and hire the best contractor the first time.Click here to get started